By Waterway


Details

Top

Part # 4744-011

Manufacturer Code 550-0221

Alternate Part #'s 550-0221, 5500221, WW5500631

Product Description

Filter Lid & Ring, 175, 200 sqft - 550-0221

Top

?     Asked on 5/18/2015by teri

How can I tell if this is the size I need? Mine has a crack and a leak at the pressure release hole. serial # 550-0221 says 125-200 sq ft. the filter is a pccf-200. Does it come with the ring lock? Thanks
 Reply

A  Answered on 5/18/2015 by InyoPools Product Specialist Patrick P.

The PCCF-200 would indicate you have the 200 Sq. Ft. Model and this would be the correct lid and it does come with the lock ring.
 Reply


?     Asked on 5/27/2017by Inyo Visitor

The lid has a crack and the Serial number if PCC-23214. Is there a way to seal the crack until we can order a replacement? Which of the models would need to be ordered as I don't see the serial number listed.
 Reply

A  Answered on 5/28/2017 by InyoPools Product Specialist Stacey M.

Hello, What model of pump do you have? We cannot run serial number, can you provide a model number for the pump to better assist you.
 Reply


?     Asked on 9/25/2017by Kathy

can you tell me how tall this piece is in inches.
 Reply

A  Answered on 9/26/2017 by InyoPools Product Specialist Lennox H.

Hi, Kathy. This Filter Lid is 19" Tall. 
 Reply


?     Asked on 6/30/2018by Robert

I have the Waterway PCCF-200. Mine has a pressure gauge but notice this one does not. One of the genius fly by night people super glued the valve and plugged the air pressure release hole. So I need a new lid only. Would this be the correct one? And if so, what about the gauge?
 Reply

A  Answered on 7/6/2018 by InyoPools Product Specialist Lennox H.

Hi, Robert. This Filter Lid & Ring - 550-0221 will fit the Waterway PCCF-200 filter. A Pressure Gauge - 101D-204D is required but not included. 
 Reply


?     Asked on 9/14/2019by Don

I have the PCCF 200. The locking ring cracked allowing a lot of water to flow out. Can just the locking ring be replaced and if so, can I just purchase a new locking ring instead of the whole top section
 Reply

A  Answered on 9/18/2019 by InyoPools Product Specialist Lennox H.

Hi, Dom. You can use the Lock Ring Assembly - 550-0701B if your can was manufactured after 2015.
 Reply