Pump Seal 601, Extra Heavy Duty PS3986 (Saltwater Pools) - PS-3986

$23.99

IN STOCK

Part # 5250-240

By U.S. Seal Manufacturing

  4 Average  

Details

Top

Part # 5250-240

Manufacturer Code PS-3986

Dimensions 3.5" L x 1.5" W x 1.5" D

Alternate Part #'s PS-3986, PS-601, PS3986, PS601

Product Description

Heavy duty pump motor shaft seal designed to withstand salt, ozone, and chemicals.  Made with carbon graphite, stainless steel and Viton rubber.  Used on a number of Waterco and Jandy pumps.

Especially recommended for:

  • Pools & spas with salt chlorine generators
  • Pools & spas with ozonators

Also offers a longer-lasting seal option for pools & spas without alternaitve sanitizers.

Top

?     Asked on 5/21/2019 by David

I am looking for a seal replacement for the pump in the attached photos. There are no markings or labels, but "Waterco" is embossed on the basket cover. It looks similar to the Aquamite and I note that the replacement seal for all the Waterco pumps listed is the PS3986. Can you advise? Thanks in advance.

 Reply

A  Answered on 5/21/2019 by InyoPools Product Specialist Patrick P.

Hi David, Yes it does appear you have Waterco AquaMite and you will require this PS3986 shaft seal.
 Reply


?     Asked on 5/6/2019 by

Will this shaft seal work for my Hayward 2610X15?
 Reply

A  Answered on 5/6/2019 by InyoPools Product Specialist Parker B.

Hello, thanks for your question. This is not the correct shaft seal. You will need Pump Seal 201, Extra Heavy Duty PS3868 (Saltwater Pools), part # 5250-235.
 Reply


?     Asked on 7/24/2018 by Glen

Will this fit a Jandy Stealth JHPU2.0?
 Reply

A  Answered on 7/24/2018 by InyoPools Product Specialist Lennox H.

Hi, Glen. Yes, this Heavy Duty Pump Shaft Seal will fit the Jandy Stealth JHPU2.0 pump. 
 Reply


?     Asked on 10/2/2017 by

Is this the correct shaft seal for motor B2853, being used with PHK2RA6E-102L pump? Also, is there any other gaskets or seals needed when replacing the motor?
 Reply

A  Answered on 10/2/2017 by InyoPools Product Specialist Lennox H.

Hi. This is not the correct pump seal, you will need P/N PS-3867. The other seals like the Diffuser Gasket - 355030, Seal Plate O-ring - 355619 are listed on Sta-Rite Super Max parts page. 
 Reply


?     Asked on 6/30/2017 by Rich

Hi, will this fit a Jandy Stealth SHPM2.0 Serial # J06FF1217. I had bought a Go-kit82 from somewhere else and it was too small.
 Reply

A  Answered on 7/2/2017 by InyoPools Product Specialist Alex V.

Rich, Based on the model and serial number, you will need the 5020-086 shaft seal
 Reply


?     Asked on 4/2/2017 by John Hutchinson

Will this seal fit an older PHPU2.0 pump? I just got the motor replacement from you guys...and did not get the seal. Thanks -John
 Reply

A  Answered on 4/3/2017 by InyoPools Product Specialist Lennox H.

Hi, John. Yes, this pump seal will fit the PHPU2.0 pump. I would also recommend getting the Diffuser O-Ring - R0558701 along with the Body Gasket  - R0555900.
 Reply


?     Asked on 4/3/2016 by Tim

Will this seal fit in pump model SHPM 2.0 with serial # N08FD4672?
 Reply

A  Answered on 4/4/2016 by InyoPools Product Specialist Scott W.

Good morning Tim,No that shaft seal won't work with that pump, the one you would need is part number 5020-087. Thanks Tim and have a great day.
 Reply


?     Asked on 6/12/2015 by

Hi can you give me the dimensions of the two seals? I have an older Jandy Stealth JHPU 1.5HP pump, need to make sure it fits. Thanks...
 Reply

A  Answered on 6/13/2015 by InyoPools Product Specialist Patrick P.

This is the correct shaft seal for an older Jandy Stealth JHPU pump. The white porcelain peice with rubber boot around it measures: 1-3/8" OD x 3/4" ID x 3/8" thick the spring parts measures 1-9/16" OD x 13/16" ID X 1-3/4" thick.
 Reply


?     Asked on 1/25/2012 by Guest

How do I change the shaft seal on my pool pump?
 Reply

A  Answered on 1/25/2012 by InyoPools Product Specialist Patrick P.

Changing the shaft seal is quite simple. Here's How To Replace a Pool Motor Shaft Seal.
 Reply


?     Asked on 1/17/2012 by Guest

Why should I purchase the heavy duty seal?
 Reply

A  Answered on 1/17/2012 by InyoPools Product Specialist Patrick P.

The heavy duty shaft seal features carbon graphite, stainless steel, and Viton rubber. The properties of this seal contribute to the resistance of chemical corrosion. This is the best choice for salt chlorine generators or ozonators.
 Reply


Top

Review Summary

 (Average 4  out of 5 stars)
1 Ratings
5 star:
 
(0)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)