Part # 5020-009
Manufacturer Code R0338200
Dimensions 1.75" X 2.39"
Alternate Part #'s PS-3986, PS-601, PS3986, PS601, 35-423-1044, APCPS601, USS-60-5019, USSPS3985
THIS SEAL IS FOR THE JANDY HHP, MHP & MHPU PUMP IT LOOKS LIKE A PS1000 SEAL BUT IT'S BIGGER! THE WHITE PORCELAIN PEICE WITH RUBBER BOOT AROUND IT MEASURES : 1 3/8" OD x 3/4" ID x 3/8" THICK THE SPRING PART MEASURES: 1 9/16" OD x 13/16" ID X 1 3/4" THICK THE SEAL TO THE WATERCO SUPATUF PUMP IS AN EXACT RELACEMENT # 4590-20
How do I change the shaft seal on my pool pump?
Reply
Changing the shaft seal is quite simple. Here's How To Replace a Pool Motor Shaft Seal.
Reply
Should I replace the body gasket as well when replacing the shaft seal?
Reply
Hi, Bryan. Yes, if your changing out the motor and those seals are original. You may also want to replace the Diffuser/ Impeller Hardware too.
Reply
I have a 2004 model Jandy Stealth 2.0hp Pump. I am told I must replace the "Seal Plate O-Ring." Is this part the same as the Back plate o ring? I can't seem to read the ID/Serial# tag on the Jandy Pump. Please let me know if you understand and can answer my question. Thank you!
Reply
Hi Jeff, often times the seal plate o ring is also referred to as the backplate seal or o ring. If you can provide us with the specific Jandy Stealth model pool pump that you have then we can locate that seal for you. If you cannot then can you send a photo of a wide shot of your complete pool pump to show the pipes going in and out of the pump? To supply this photo simply click the reply link below and upload your photo or quickest using our live online chat feature. Once we get this photo or model number we can make the proper recommendation for the seal.
Reply
