PER THE MANUFACTURER: THIS ITEM IS NOT AVAILABLE FOR SALE ONLINE
By Pentair Pool Products
Model # 3534-1
Manufacturer Code 78864250
Alternate Part #'s 78864250, 56-102-1024
I just purchased two of the Aqualimn III (120V/250 Watt) lights from your website. I was wondering if these lights can be used with a dimmer relay. I have an Aqua Plus pool panel and it has the ability to utilize a dimmer kit to accommodate dimming the lights. See page 24 of the following link "Lights Relay". https://www.hayward-pool.com/pdf/manuals/Manual236.pdf
I understand that some lights (such as fluorescents) should not be controlled by a dimmer so I am wondering if there are any dimmi
Reply
We spoke with the manufacture of the light and they stated that they do not recommend using the dimmer relay on the AquaLumin III light as a dimmer will shorten the life of any bulb. They also stated the halogen bulbs are more fragile then incandescent bulbs and that the life would be shortened even quicker on the halogen. With all of this being said they stated you could use the dimmer relay, but we wanted you to be aware of these potential issues. The dimmer relay for the aqua plus can be purchased here http://www.inyopools.com/Products/02200004034490.htm
Reply
I just received my Aqualumin III lights and it appears that the mounting brackets do not come with the lights. It does not appear that the light comes with everything for new installation in a vinyl pool with steel walls. Any insight you can provide is appreciated.
Reply
If you are replacing an Aqualumin light then you would require this Aqualumin retrofit kit http://www.inyopools.com/Products/07501352024766.htm If this is new construction or a new light installation then you would require either of the items here http://www.inyopools.com/SearchResults.aspx?KeyWords=78887 The 1" and 3/4" on these items is referring to the conduit size which the light cord goes through.
Reply
I currently have an AquaLumin II (511371) light installed in my inground pool that has a direct short and is not working. Will this light be a direct replacement for the II? If not, then what would be required to install a new light?
Reply
Hello Tom - The AquaLumin III will directly replace the AquaLumin II. The mounting brackets are the same for both lights.
Reply
I currently have the aqua lumin 2 which needs to be replaced. Will the Aqua lumin 3 mount on the bracket I have?
Reply
Hi, The Aqualumin III fixture will mount to the same mounting bracket used with the Aqualumin II fixture.
Reply