Terminal Board Assy w/ Voltage Switch - 628401-001

$21.99

IN STOCK

Part # 5271-23

By Century Motors


Details

Top

Part # 5271-23

Manufacturer Code 628401-001

Dimensions 3" L x 1.5" W x 1.5" D

Alternate Part #'s 628401-001, 628401001, 35-126-2002, AOS628401-001

Product Description

Terminal Board Assy w/ Voltage Switch - 628401-001

Top

?     Asked on 8/29/2018 by Dave

I removed the capacitor/switch cover to discover the terminal board w/voltage switch was broken and crumbling. How are the motor leads disconnected and reconnected to the back of the new rotary switch (black rotor)?
 Reply

A  Answered on 8/30/2018 by InyoPools Product Specialist Lennox H.

Hi, Dave. We will need to know the motor's Part, Cat or Model number in order to locate the wiring diagram. 
 Reply


?     Asked on 8/5/2018 by Terry

How can I get a new backplate (aluminum casting that holds the bearing and this terminal board? My pump is a WF-26 with a y56y frame. The pump got droped and is othersie ok, but his casting cracked :(
 Reply

A  Answered on 8/5/2018 by InyoPools Product Specialist Lennox H.

Hi, Terry. Some parts are listed on the A.O. Smith Motor Parts page. If it's not listed, you will need to provide us with the motor part number. 
 Reply


?     Asked on 7/22/2017 by Cook

Can this terminal board be used on ust1102 motor ?
 Reply

A  Answered on 7/22/2017 by InyoPools Product Specialist Alex V.

Cook, The terminal boards on motors change over time. Please be sure to match your terminal board wit the photos on the page. 
 Reply


?     Asked on 5/8/2017 by Al

Can this be used on motor C48L2EC1103? It is for a Sta-rite 1 1/2 hp irrigation pump.
 Reply

A  Answered on 5/9/2017 by InyoPools Product Specialist Lennox H.

Hi, Al. In order to confirm we will need a photo of the motor's existing terminal board.
 Reply


?     Asked on 5/2/2017 by Frank

Is this the correct terminal board replacement for the A.O. Smith Model C48L2N134B1?
 Reply

A  Answered on 5/2/2017 by InyoPools Product Specialist Lennox H.

Hi, Frank. Yes, this Terminal Board Assy W/voltage Switch - 628401-001 can be used with the C48L2N134B1 motor.
 Reply


?     Asked on 2/5/2017 by Joseph

Is this equivalent to part number 2518570-001 on a QC 1102 pump motor? Will it work at 208 volts?
 Reply

A  Answered on 2/7/2017 by InyoPools Product Specialist Lennox H.

Hi, Joseph. This Terminal Board can be used with the QC1102 motor.
 Reply


?     Asked on 8/30/2016 by Stan

Does this board have 2 round connectors and 1 spade terminal? How do the 2 round connectors pull apart? Thanks
 Reply

A  Answered on 8/30/2016 by InyoPools Product Specialist Stacey M.

Hello Stan, you can call a tech a A.O smith 866-887-5216 to walk you through any kind of connectors/pull apart.
 Reply


?     Asked on 5/28/2016 by Ed Fincher

Will this switch fit an AO Smith motor Model # K48L2N100A2
 Reply

A  Answered on 5/29/2016 by InyoPools Product Specialist Lennox H.

Hi Ed, This Terminal Board Assy can be used with the K48L2N100A2 motor.
 Reply


?     Asked on 6/18/2015 by vic gitzke

When i run the pump without the pool cleaner, it runs about 5 min and shuts off Comes back on in about 3 min . Doesint do this with cleaner and motor doesint seem that hot
 Reply

A  Answered on 6/19/2015 by InyoPools Product Specialist Lennox H.

Vic, Not sure what's going on, usually it will be the other way around because when the cleaner is working it can put extra load on the motor. Do think replacing the Terminal Board Assy W/voltage Switch (628401-001) will solve your problem but you can give it a try.
 Reply


?     Asked on 5/23/2015 by Tom

I broke the black dial on the"terminal board w/voltage switch. Is ther a way to eliminate board and hard wire @ 230 volts?
 Reply

A  Answered on 6/3/2015 by InyoPools Product Specialist Lennox H.

Tom, There is a way to wire the motor with out the terminal board, but I will recommend consulting with a license electrician or replace the Terminal Board Assy W/voltage Switch (628401-001).
 Reply


?     Asked on 4/29/2015 by Al Zubcak

Will this fit a Hayward Super Pump model #C48L2N134B1, 1 1/2 HP, Volts 115/230?
 Reply

A  Answered on 4/30/2015 by InyoPools Product Specialist Robert M.

Hello Al - If your motor has the black dial that switches the voltage, part number 5271-23 is the correct terminal. If it does not have the black dial, part number 5271-22 is the correct terminal.
 Reply


Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)