Slow Blow, 2.5A Fuse - 1930251

$7.99

IN STOCK

Part # 3295-023

By Maytronics

  5 Average  

Details

Top

Part # 3295-023

Manufacturer Code 1930251

Dimensions 0.75" X 0.25"

Alternate Part #'s 1930251, 87-111-1014, MAY1930251

Product Description

INYO # 3295-023 MAYTRONICS # 1930251 GENERAL DESCRIPTION: THIS IS THE 2.5 AMP FUSE USED IN SOME DOLPHIN POWER SUPPLIES THIS IS A SMALL CLEAR GLASS FUSE LENGTH:3/4" DIAMETER: 3/16"

Top

?     Asked on 1/23/2019 by

please show a photograph for the location of the fuse on the Dolphin DX4
 Reply

A  Answered on 1/29/2019 by InyoPools Product Specialist Lennox H.

Hi. We do not have a picture, you can tale a look at the Maytronics Dolphin Pool Cleaner Repair video. 
 Reply


?     Asked on 9/2/2018 by

i have the 9995671 power supply -- the power supply has no power. can i change fuse?
 Reply

A  Answered on 9/2/2018 by InyoPools Product Specialist Lennox H.

Hi. This power supply does not have a fuse. Use our How to Troubleshoot a Dolphin Pool Cleaner guide. 
 Reply


?     Asked on 7/24/2018 by

Where is the fuse at
 Reply

A  Answered on 7/24/2018 by InyoPools Product Specialist Lennox H.

Hi. The fuse is located in the power supply. 
 Reply


?     Asked on 10/2/2017 by gaspare

my dolphin premier has stoped working.. is there a fuse for this unit??? if so where is it located... thanks
 Reply

A  Answered on 10/3/2017 by InyoPools Product Specialist Lennox H.

Hi, Gaspare. The fuse is located inside of the power supply. 
 Reply


?     Asked on 8/8/2017 by Kevin

Where is fuse for dynamic D.C. Power supply
 Reply

A  Answered on 9/22/2017 by InyoPools Product Specialist Andy O.

Hello, Kevin- It would depend on the age of the unit, for older units fuse is located on the back of the older power supplies. There is a circular fuse holder (black) on the back. But if you have a newer unit there is no way to replace the fuse on the power supply. 
 Reply


?     Asked on 5/26/2017 by John

Our Dynamic DC power supply is not turning on, is there an inline fuse for Part Number 9995678?
 Reply

A  Answered on 5/29/2017 by InyoPools Product Specialist Lennox H.

Hi, John. Some power supply requires a fuse. I'm not sure if the 9995678 has one, you will have to open it to confirm.
 Reply


?     Asked on 5/13/2017 by

How can I check the fuse on the new digital power supply?
 Reply

A  Answered on 5/18/2017 by InyoPools Product Specialist Lennox H.

Hi. You can use the wikiHow to Test a Fuse With a Multimeter guide to test the power supply fuse.
 Reply


?     Asked on 11/13/2016 by Rich

If my power box is newer and their is no black plug on the back, where else would it be and how do I get to it ? Thanks
 Reply

A  Answered on 11/14/2016 by InyoPools Product Specialist Stacey M.

Hello Rich, you might try calling Maytronics 888-365-7446 to see if there is another way for hook up.
 Reply


?     Asked on 8/21/2015 by Suzy

How does the fuse holder open? I can see it on the back of the power supply pack but not sure how it opens. Center of button pushes in and out. Thanks, Suzy
 Reply

A  Answered on 8/25/2015 by InyoPools Product Specialist Brian M.

If it is an older analog power supply , Maytronics technical ( 888-365-7446 ) said there should be a small black "plug" on the back of the unit. They said a coin should be enough to pry it open. If it is a digital power supply, those are factory sealed and can not be worked on.
 Reply


?     Asked on 7/21/2015 by Gary

What volt is this
 Reply

A  Answered on 7/23/2015 by InyoPools Product Specialist Lennox H.

Hi Gary, According to Maytronic the max voltage will be 250 volts for the 2.5a 5x20 Fuse (1930251).
 Reply


?     Asked on 5/19/2015 by

Where is the fuse located?
 Reply

A  Answered on 5/24/2015 by InyoPools Product Specialist Patrick P.

The fuse is located on the back of the older power supplies. There is a circular fuse holder (black) on the back.
 Reply


?     Asked on 2/1/2012 by Guest

I need a part for my Dolphin pool cleaner but I don't see it on the parts breakdown. Is there still a chance you may still have it?
 Reply

A  Answered on 2/1/2012 by InyoPools Product Specialist Patrick P.

The manufacturer which is Maytronics, does not offer all parts for sale. If you don't see a part on the breakdown you can give us a call. For parts that they do not consider "DIY (do it yourself), you will need to contact them and send in the cleaner for repair.
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)