Part # 3295-076
Part # 3295-076
Manufacturer Code 99956002RD-ASSY
Dimensions 9.75" X 8.625"
Alternate Part #'s 99956002RD-ASSY, 99956002RDASSY, DL9995670USASSY, MAY9995670-US-ASSY
INYO # 3295-076
PLEASE NOTE MAYTRONICS # 99956002RD-ASSY IS DISCONTINUED AND REPLACED WITH 9995670-US-ASSY. WE WILL SHIP THE 9995670-US-ASSY.
THIS IS THE POWER SUPPLY USED ON SOME DOLPHIN CLEANERS
THE BASIC BODY IS A VERY LIGHT GREEN GRAY PLASTIC COLOR
THE BASE HAS AN ALUMINUM HEAT SINK BUILT IN
THERE IS A HANDLE TO CARRY THIS WITH BUILT INTO THE TOP.
ON THE FRONT LEFT IS AN ON/OFF SWITCH
ON THE LOWER RIGHT SIDE IS A PLUG IN FOR THE CLEANER CABLE.
THIS PLUG IN HAS 4 SMALL ROUND FEMALE CONNECTORS.
THE PLUG IN INCLUDES AN ATTACHED COVER FOR USE WHEN THE CABLE IS NOT CONNECTED.
THERE IS A 7-1/2 FT. CORD WITH A NEMA 3-PRONG GROUNDED PLUG. (cord not included)
THE UNIT ALSO HAS A FUSE HOLDER ON THE BACK AND COMES WITH THE 2.5 AMP FUSE.
WIDTH: 9-3/4" (A)
FRONT TO BACK: 6"
HEIGHT: 8-5/8" (B)
THERE IS A LABEL ON THE BACK WITH THESE MARKINGS
TYPE: DIAGNOSTIC RD-AC
INPUT: 115 VAC 60HZ 150W
OUTPUT: AC 21V NOMINAL
Yes i see that there are either 29 volts ac or 24 volts DC POWER SUPPLYS How do i figure out if my unir runs on DC OR AC POWER.
Using Multimeter - take your digital multimeter and set it in the DC mode and connect both the terminals of the multimeter with the output wire. If your output is DC then it will show you some output whether positive or negative. But if your output is AC then you will not get any output in the multimeter. So next step is to switch your multimeter into the AC mode. (this step is required only if there is no output in DC mode of multimeter). Now connect your multimeter with the output and surely you will get an output in the display if your output is AC.
Does Maytronics Dolphin 9995670-US-ASSY Pool Cleaner Power Supply work with the maytronics dx3 robot?
What is the serial number of your unit? This will help us determine which variation of DX3 your cleaner is.
hi,my old dolphin power supply use have a display for hours of service,the one you have online,have only on/off button,do you have the one whit display ?
Hi, Maurizio. We will need to know the model and serial number of your unit or the power supply in order to locate the correct replacement.
Depends on the unit you are looking for. Some are obsolete. If you provide the model and serial number off the unit we can provide the correct supply required today.
My power supply switch lights up but the daily mode buttons do no and the pool cleaner does not run. An animal knocked the unit two feet off the stand to the ground but no signs of cracks
Hi Chuck, that is a sign that your power supply needs to be replaced. You may want to double check that all of the cords are securely pluged into the power supply and they did not come loose.
I need a power supply for Dolphins deluxe 4 the old version (green in color) do you have it on stock. Thanks
Hi, Ednald. You can use this Power Supply - 9995670-US-ASSY which we have in stock with the Dolphin Deluxe 4 cleaner.
The unit is not turning on any suggestions? Is there a way to open the power supply?
You will need to replace the power supply if it is not functioning. You may also try contacting Maytronics at 1-888-365-7446 to see if they have a authorized repair shop in your area. They would be able to answer you if the power supply is repairable.
Will this poer supply work on model MCC8
If they say the motor isn't working. Do they mean the power nbox or does the main cleaner have a motor.
Hi Shanda, The cleaner does have a motor inside that is powered by the power supply. So that is the motor that isn't working.
We have a dolphin dx3 pool vaccum and the power supply unit needs to be replaced. Our current power supply unit is a diagnostic DC # 9995672, is this unit compatible with the vaccum we currently have?
I need a part for my Dolphin pool cleaner but I don't see it on the parts breakdown. Is there still a chance you may still have it?
The manufacturer which is Maytronics, does not offer all parts for sale. If you don't see a part on the breakdown you can give us a call. For parts that they do not consider "DIY (do it yourself), you will need to contact them and send in the cleaner for repair.