Speck A91 .75 HP Two Speed Pool Pump (A91-I-2) - AG212-2075T-0ST



Part # 2191116046

By Speck Pumps



Part # 2191116046

Warranty 12 Months

Manufacturer Code AG212-2075T-0ST

Alternate Part #'s A91-I-2, AG212-2075T-0ST

Product Description


Self-Priming Swimming Pool Pump

The Speck Model A91 above-ground and small in-ground pool pump incorporates many upgraded features expected only from larger in-ground pumps. The pump is self-priming, extremely quiet, and has an easy on-off, clear two piece lid. Quick disconnect unions are provided for simple installation and maintenance. The A91 is available with a special energy efficient PSC motor saving up to 20% over standard split phase motors.


  • This high performance, medium head pump comes complete with an industry standard 5/8" mechanical seal for convenient replacement.
  • Pump parts are made of 100% recyclable plastic. Non-corrosive, chemical/UV resistant, and can withstand temperatures of up to 150° F.
  • Suction and discharge ports are equipped with quick disconnect unions. Provided with a standard 1 1/2" slip and 1 1/2"/1 1/4" hose adaptor connections. Optional 1 1/2" NPT connection also available.
  • For pool users' safety, the impeller has a dielectric shaft sleeve that provides absolute separation between the pool water and electric parts.
  • Pump is equipped with durable, special 48 frame thru-bolt mount energy efficient PSC motor with stainless steel shaft.
  • Pump has standard 3ft. 3/12 AWG cord set pre-mounted. A variety of cord sets are available.
  • Optional 4" high base is available.
  • Specially constructed clear lid with ring lock design is easy to open. Large strainer basket is always locked in place.
  • Motor is easy to remove without disturbing the plumbing. Reusable o-rings throughout.
  • The Model A91 comes complete with a full 12 month warranty.
  • Every pump is performance tested before leaving the Speck factory.





Product Specifications

1 HP
115 V
Max Pool Size:
1-1/2 gal.
Union Connectors:
23 lbs.
Port Size:
1.5 in.

?     Asked on 1/23/2019 by Reanne

i have a speck model A91-11 s/n 1465145 for an above ground pool. i have attached some pics (not very good ones -taken at night). Which pump do i need to order to replace it? it has an on off switch with a high/low setting


A  Answered on 1/24/2019 by InyoPools Product Specialist Lennox H.

Hi, Reanne. The correct replacement will be the Speck A91 1 HP Two Speed Pool Pump (A91-II-2) - AG216-2100T-0ST

?     Asked on 5/21/2017 by Billy Kinser

Is there a pump that is the same as mine but a different part # ? The pump i have is a SPECK pump 1 hp with a high and low switch so im assumeing that is 2 phase. The pool is above ground 25ft- 4ft deep. My pump part# 7-548ACO8'O29C-02 Im needing a filter in the tall canister but got to get the right one and also need the round screw on lid for the skimmer where it shoots in the pool.on the inside of the pool. Maybe somebody can help

A  Answered on 5/24/2017 by InyoPools Product Specialist Lennox H.

Hi, Billy. Speck has different model above ground pool pumps, I will need to know the model that you have. If you do not know the pump model you can send us pictures of the pump to upload@inyopools.com.


Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
4 star:
3 star:
2 star:
1 star: