Pool Alkalinity Increaser 10 Lb. Jar - P36010DE



Model # P36010DE

  4.87 Average  



Model # P36010DE

Product Description

Total Alkalinity Increaser  

Pool Solutions Total Alkalinity Plus raises the total alkalinity level in your pool to balance pH.  Balances pool water to help prevent eye irritation, equipment corrosion, and plaster etching.

  • 10 lb container
  • Compares to BioGuard Balance Pak 100
  • Sodium bicarbonate
  • Recommended alkalinity levels between 75ppm and 125ppm
  • Complete instructions for dosage on container
                                        Amount of Sodium Bicarbonate needed to increase Alkalinity
Desired Increase                                         Pool volume in gallons
1,000 5,000 10,000 20,000 50,000 100,000
10 ppm .14 lbs. .7 lbs. 1.4 lbs. 2.8 lbs. 7 lbs. 14 lbs.
20 ppm .28 lbs. 1.4 lbs. 2.8 lbs. 5.6 lbs. 14 lbs. 28 lbs.
30 ppm .42 lbs. 2.1 lbs. 4.2 lbs. 8.4 lbs. 21 lbs. 42 lbs.
40 ppm .56 lbs. 2.8 lbs. 5.6 lbs. 11.2 lbs. 28 lbs. 56 lbs.
50 ppm .70 lbs. 3.5 lbs. 7 lbs. 14.0 lbs. 35 lbs. 70 lbs.
*Caution: Do not add more than 10 lbs. per 10,000 gallons of water at one time. If the pool needs more than this, add the 10 lbs./10,000 gallons amount then retest 12 hours later. After testing, you can make the necessary adjustments. If the alkalinity is 50 ppm or lower, test for the presence of metals in the water before adjusting the alkalinity.

For More Pool Chemicals

Product Specifications

10 lbs.

?     Asked on 12/20/2012 by Guest

My test kit only check for chlorine and pH. What does the alkalinity do?

A  Answered on 12/20/2012 by InyoPools Product Specialist Patrick P.

Total Alkalinity is a measure of the "buffering capacity" of water, or its ability to resist a change in pH. Low Total Alkalinity can cause: etching of pool plaster, corrosion of metal parts, staining of the pool surfaces, etc. High Total Alkalinity can cause cloudy water, burning of eyes, chlorine being ineffective, etc.

?     Asked on 12/19/2012 by Guest

What can we use in our salt water pool to lower the alkalinity?

A  Answered on 12/19/2012 by InyoPools Product Specialist Patrick P.

To decrease the alkalinity level in you pool, you can use dry acid, muriatic acid or simply partially drain and refill the pool. Just use caution as the acid will bring down the pH as well.


Review Summary

 (Average 4.87  out of 5 stars)
15 Rating
5 star:
4 star:
3 star:
2 star:
1 star:

The Most Recent Reviews