1. Home
  2. Above Ground Pools
  3. Hayward Pool Pump Impellers
  4. SP-2607-C
  5. Q & As

?     Asked on 1/22/2013by Guest

Does the SP2607C impeller come with instructions?
 Reply

A  Answered on 1/22/2013 by InyoPools Product Specialist Patrick P.

No, the impeller does not come with instructions. If you need installation instructions, you can follow steps 20-23 here. 
 Reply


?     Asked on 12/27/2014by Adolph

Does your impeller SPX2607-C fit right into your SPX2600-E5? I am looking to order these if they are compatible. Thanks
 Reply

A  Answered on 12/29/2014 by InyoPools Product Specialist Robert M.

The SPX2607-C impeller is compatible with the SPX2600-E5 seal plate.
 Reply


?     Asked on 8/14/2016by Carl

How do get the impeller off the pump?
 Reply

A  Answered on 8/15/2016 by InyoPools Product Specialist Lennox H.

Hi Carl, You will have to lock the motor shaft and then unscrew the impeller. Our How To Replace the Motor on Your Pool Pump guide will provide you with the steps.
 Reply


?     Asked on 7/22/2018by Keyster

Is this impaller compatible with SP3007-C
 Reply

A  Answered on 7/22/2018 by InyoPools Product Specialist Lennox H.

Hi, Keyster. This impeller is not compatible or can be replaced with Part # SP-3007-C. 
 Reply


?     Asked on 3/20/2020by Trace

Hey, looking for a replacement impellor with the part number SP2607-C. Will an SPX2607-C replace this? Was wondering what the X stood for.

 Reply

A  Answered on 3/20/2020 by InyoPools Product Specialist Patrick P.

Hi Trace, Yes the SPX2607-C is the direct replacement for your SP2607-C. Sometimes Hayward has used an X in there part #'s and sometimes not, but yes it is the exact same part.
 Reply


?     Asked on 5/14/2020by bjac1228

I purchased a pump motor and go kit -3 from your ebay store for a Hayward model # sp2607x10. The motor seems correct and all the seals seem okay EXCEPT for the impeller seal... the one in the kit is too small. The impeller in my pump is a haward number sp2607-c which would require a seal with a inside diameter of 3/4”, the seal that came in the go kit 3 has a 5/8 diameter seal. Any idea what the correct seal is? I also asked this question on ebay. Thankyou
 Reply

A  Answered on 1/18/2021 by InyoPools Product Specialist Hector F.

Hello, the correct shaft seal options for the Hayward Super Pump model sp2607x10 is listed at key number 11 on this parts diagram. 
 Reply


?     Asked on 6/2/2020by John Keeney

I'm looking for a gasket for my SP2607-C impeller. Do you carry?
 Reply

A  Answered on 12/2/2020 by InyoPools Product Specialist Hector F.

Hi John, could you send us a few photos of your pump and motor? Please take a close up shot of the motor label as well as a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
 Reply


?     Asked on 5/5/2021by Sean Teehan

Hi...for this impeller do you need an impeller ring?
 Reply

A  Answered on 5/5/2021 by InyoPools Product Specialist Robert M.

The Hayward SP-2607-C impeller does not require an impeller ring.
 Reply


?     Asked on 2/14/2022by Inyo Visitor

my impleller to be replaced is SP2607-CE but i dont know where to find a new one to replace it Is a spx2600 equal The motor screw fiT´s it. How do I Know that te crew of the motor is the same of de impeller ? Thank you in advance Alcides Pereira
 Reply

A  Answered on 2/14/2022 by InyoPools Product Specialist Craig C.

Hello.  The Hayward Pool Products Impeller 1.0 THP SPX2607-C is the equivalent to the impeller SP2607-CE.  Impeller 1.0 THP - SPX2607C   The impeller SPX2600 is NOT a compatible replacement.  The PureLine Generic Super Pump Style Impeller model PL2671 is the generic equivalent to the SP2607-CE Impeller and is available at a lower cost.  Generic Super Pump™ Style Impeller 1.0 THP - PL2671
 Reply


Back to Details Got a Question?