?     Asked on 1/12/2018by Kyle

Does the shaft seal included with this work for salt water pools?
 Reply

A  Answered on 1/12/2018 by InyoPools Product Specialist Lennox H.

Hi, Kyle. The shaft seal that comes with this kit can be used with a saltwater pool. 
 Reply


?     Asked on 11/14/2018by Megan Thomas

Would this work on a Power flow LX Pump -SP1580Z2 pool pump. Serial number:28512CH
 Reply

A  Answered on 11/15/2018 by InyoPools Product Specialist Hector F.

We actually do not carry a seal kit for that model but you can replace the seals individually that you need. Most commonly the shaft seal and housing o ring are what is replaced. Please click here to view that parts diagram. 
 Reply


?     Asked on 1/29/2019by Inyo Visitor

Will this also work with the Hayward NORTHstar line?

 Reply

A  Answered on 1/29/2019 by InyoPools Product Specialist Michelle B.

Hello, This will not work with a North star.
 Reply


?     Asked on 2/26/2019by Inyo Visitor

Is this seal kit good to use for the century centurion B854 motor
 Reply

A  Answered on 2/27/2019 by InyoPools Product Specialist Hector F.

If you have the model Hayward Tristar or Ecostar then yes this kit is correct but you cannot use just the motor information to cross reference those seals. 
 Reply


?     Asked on 4/28/2019by Inyo Visitor

Have a Tristar SP3210X152 that is about a year old and was working great until recently it seems to not have as much suction or pressure going out?It did run without water for about 10min,would an air or internal water leak cause this?Would the seal kit fix the problem? Thanks Steve
 Reply

A  Answered on 4/28/2019 by InyoPools Product Specialist Lennox H.

Hi, Steve. The pump running dry could be caused by a number of things including a suction leak which can be caused by bad o-rings within the pump. You can start by replacing the seals. 
 Reply


?     Asked on 2/8/2020by Boyd

I’m replacing pump 196337 which connects to a Hayward tristar pump (SP3200Z16). Will this kit (gokit81) be the correct seal kit?

 Reply

A  Answered on 2/11/2020 by InyoPools Product Specialist Lennox H.

Hi, Boyd. Yes, this is the correct kit for your model pump. 
 Reply


?     Asked on 4/6/2020by joe b

I have a motor marked as follows: SP3210Z23E, 7-K56AA13A04-05, AO Smith Century pool motor also indicates Hayward Pool Products. Will this GOKIT81 work for thjis application? Also can I buy 4 screws that hold the motor together?
 Reply

A  Answered on 4/6/2020 by InyoPools Product Specialist Patrick P.

Hi Joe, Yes this GOKIT81 is the proper seal kit for your application. If you need the motor then you will need this Hayward TriStar Dual Speed Motor 
 Reply

  • Commented on 4/6/2020 by Product Owner

    Thanks for your response. 2 follow up questions. I am looking for the 4 bolts that go through the housing into the motor they have a 5/16 head and are 10.25 “ in length. Also looking for a reverse thread impeller bolt. 2” length is p/n 5112-209 correct?
     Reply

    • Commented on 4/6/2020 by InyoPools Product Specialist Patrick P.

      Hi Joe, I'm showing that these 5112-221 Motor Bolts are what you will need. And yes the 5112-209 Impeller Screw is correct 
       Reply

      • Commented on 4/6/2020 by Product Owner

        Patrick the motor bolts show DIMENSIONS 1.25" L X 0.6" W X 0.6" D The ones I’m looking for are 10.25”
         Reply

        • Commented on 4/6/2020 by InyoPools Product Specialist Patrick P.

          Joe if you go to this Hayward TriStar Parts Page could you let me know the key # of the bolt you are in need of
           Reply

          • Commented on 4/6/2020 by Product Owner

            Bolt is not listed on the schematic. It starts at the back of the motor goes all the way thru and attaches that aluminum plate in the front. It’s how you disassemble the motor. I drew a yellow line

             Reply

            • Commented on 4/7/2020 by InyoPools Product Specialist Patrick P.

              Hi Joe, Those are the thru bolts we do carry these 12" Thru Bolts which are designed to be cut down.
               Reply


A  Answered on 4/6/2020 by Product Owner

Forgot to ask what are the part numbers for the 2 bearings as well.
 Reply

  • Commented on 4/6/2020 by InyoPools Product Specialist Patrick P.

    Joe, You would require two of these 6203 Bearings
     Reply


?     Asked on 4/7/2020by Brian

is this the correct shaft seal for a salt water system or is the heavy duty shaft seal the correct part for a saltwater system
 Reply

A  Answered on 4/7/2020 by InyoPools Product Specialist Lennox H.

Hi, Brian. The shaft seal in this kit is a standard one, you would need to purchase the PS-4280 - Heavy Duty seal. 
 Reply


?     Asked on 5/15/2020by Dan

Will this kit work on my hayward 3401VSP PUMP?
 Reply

A  Answered on 1/5/2021 by InyoPools Product Specialist Hector F.

Hi Dan, for us to suggest the proper seal kit could you send a photo of a wide shot of your complete pool pump to show the pipes going in and out of the pump? To supply this photo simply click the reply link below and upload your photo or provide them using our live online chat feature. Once we get this photo we can make the proper recommendation for the seal kit.
 Reply


?     Asked on 6/25/2020by Victor

Hi, can you please tell me if this is the right kit for Hayward SP3200VPS, if not do you have a tune up kit for it. thank you
 Reply

A  Answered on 6/25/2020 by InyoPools Product Specialist Hector F.

Ye, this will be the correct seal kit for the model Hayward Tristar SP3200VPS pool pump. 
 Reply

  • Commented on 6/26/2020 by Product Owner

    thank you
     Reply


?     Asked on 10/7/2020by Robert Martino

Does this kit fit the Ecostar sp3400vsp?
 Reply

A  Answered on 10/14/2020 by InyoPools Product Specialist Hector F.

Yes, this GOKIT81 is compatible with the Hayward Ecostar model sp3400vsp pool pump. 
 Reply


?     Asked on 10/17/2020by Amando Garza Jr

will this kit work on a AO Smith part NoB855?
 Reply

A  Answered on 10/18/2020 by InyoPools Product Specialist Patrick P.

Could you send us a few photos of your pump and motor? Please take a close up shot of the motor label as well as a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation for the seal kit.
 Reply


?     Asked on 11/29/2020by Lonnie J Maresh

will this kit work on a hayward tristar model #SP3210X15
 Reply

A  Answered on 11/30/2020 by InyoPools Product Specialist Hector F.

Hi Lonnie, yes this is the correct seal kit for the Hayward Tristar pump series. 
 Reply


?     Asked on 12/20/2020by Inyo Visitor

Will this work with Hayward model SPX3205Z1PE, serial 21111404053495012?
 Reply

A  Answered on 12/21/2020 by InyoPools Product Specialist Hector F.

Hello, this is the correct seal kit for the Hayward Tristar series pool pump which does us the part number SPX3205Z1PE kit. You can also view this parts diagram to confirm it is your pool pump. 
 Reply


?     Asked on 12/22/2020by Donald E Gleaton

is it a salt water seal?
 Reply

A  Answered on 12/22/2020 by InyoPools Product Specialist Hector F.

Hi Donald, this seal kit does not come with a saltwater shaft seal. The saltwater shaft seal for this Hayward Eco-Star pool pump series is part number 5250-250.
 Reply


?     Asked on 4/20/2021by Steve P

Is there a rebuild kit which includes the heavy duty shaft seal ? Or - do I have to order the components separately? Wanting to rebuild my Hayward SP3210X15 with original factory motor. Shaft seal has JUST started to drip . . . .
 Reply

A  Answered on 4/21/2021 by InyoPools Product Specialist Robert M.

We do not currently have a kit that includes the heavy-duty shaft seal. That would have to be purchased separately. The part number for the heavy-duty shaft seal is 5250-250.
 Reply


?     Asked on 10/12/2022by Michael

Will this kit work on a Hayward model pump SP32152EE and motor SP3215Z2BE?
 Reply

A  Answered on 10/13/2022 by InyoPools Product Specialist Craig C.

Hello Michael.  The Tune Up Kit Hayward TriStar/EcoStar - GOKIT81 is compatible with the Hayward pool pump model SP32152EE and Hayward motor model SP3215Z2BE.  Attached please find the Hayward TriStar SP3200X Series Pump exploded parts diagram for reference.
 Reply