I'm looking for a Jacuzzi filter valve with a part # 39263105, do you carry this?
Reply
The OEM version of the 39263105 valve is no longer being manufactured however this valve here is the generic version of the Jacuzzi 39263105 and will work as a replacement. The plumbing port configuration on this valve is a little different from the original so you may have some slight re-plumbing.
Reply
Does this 6 bolt on com with a new gasket and bolts/cap screws?
Does this valve have 1-1/2 inch female fitting for hose to valve connection?
Is this a seven feature valve?
Reply
This valve has 7 positions, one being closed. The valve Port Size : 1-1/2" Female threaded (Actual diameter about 1-7/8")
Reply
Does the o-ring come with this filter kit?
Reply
I'll have to confirm with the warehouse, but the Jacuzzi 7-Position Dial Valve (39262803R) does come with the o-ring and bolts.
Reply
Im looking for a valve replacement for a jacuzzi 190 laser sand filter. It has a 7 bolt pattern on it. Which product would i need?
Reply
Hi The Jacuzzi DV6/DV7 Top Mount Valve (4625-80) will work with your Jacuzzi Laser 190 Sand Filter however that model has only a 6 bolt pattern not 7.
Reply
Do you have a spider gasket for a DV 7- POS 11/2 V-FLN
Reply
Hello Brinda, the replacement spider gasket comes glued into the diverter; part number 4628-13 Key Assembly.
Reply
Does this valve work with the jacuzzi model 24FM?
Reply
Yes, the TM12JL Top Mount Valve, Jacuzzi DV6/DV7, 6 Bolt On replacement, is the correct replacement valve for your Jacuzzi MFM Sand Filters (MFM17,20,24)
Reply
I need a top mount valve for Jacuzzi laser 225 which one will be the right one..? thanks..
Reply
If you have a bolt on style valve then you will require the Jacuzzi Laser Bolt on Style Valve and if you have the clamp on style then you will need the Jacuzzi Laser Clamp on Style Valve
Reply
I have a Jacuzzi brand sand filter and on the side of the valve it says Model # DV ASSY 6-POS TM12JH8.... I'm looking for a spider valve or a replacement valve assembly ...do you offer anything ?
Reply
Hi Alexia, For the TM12JH8 Jacuzzi Valve you would require the TM12 Spider Gasket we also have a Video on How to Replace a Spider Gasket which you might find helpful.
Reply
We have an old Jacuzzi sand filter with a Praher model TM-12 valve. There is a flange /collar that threads on to the tank that has female threads to accept the six bolt pattern of the TM-12 I assume this came with the original tank. I need a square shouldered o-ring for the TM-12 and a 6 bolt pattern flat flange gasket. The o-ring fits in a groove on the tank but does not seem to index on the valve. I found pieces of a flat gasket but have no sample to match.Leaks at this joint
Reply
Hi Sheldon, The Gasket, Flange (square Ring) (G-145) is the gasket you will need for the Jacuzzi Laser Sand Filter (Bolt On).
Reply
I have an old Jacuzzi Model MFM 17/20 sand filter and need a top mount for it. It is a 6 bolt mount and the Model # is DV-6. Is there a replacement part for this? The filter was purchased new in 1990. Thanks.
Reply
Hi Dave, this would be the correct replacement valve for the Jacuzzi MFM sand filter.
Reply
I have an old Jacuzzi Model MFM 17/20 sand filter and need a top mount for it. It is a 6 bolt mount and the Model # is DV-6. Is there a replacement part for this? The filter was purchased new in 1990. Thanks.
Reply
Dave,The TM12JL valve will be the replacement DV-6 valve that fits your sand filter.
Reply
I need a replacement switch for my Jacuzzi filter. Model number 39263009. The date on it is 27OCT00. Do you have such a thing?
Reply
Hi Al, If you are speaking of needing the entire 39263009 then yes we do carry the Jacuzzi 39263009 Valve here.
Reply
dv7 clamp on which part #
Reply
Hi Joe, the Jacuzzi DV7 clamp on valve is Part # 39263020K
Reply
i have a mfm 20 jacuzzi top mount. i need the whole valve which replacement do i need. thank you
Reply
Kevin, You can view the replacement here: http://www.inyopools.com/Products7/07500000047694.htm You will need to re-pumb the system.
Reply
I have a 17FM7LA jacuzzi sand filter dated 1982. The pressure gauge fitting in the dial valve is cracked and therefore need a new cover or complete dial valve. Is my sand filter model the same as the MFM series of jacuzzi filters?
Reply
Hi, From what I've gathered the replacement valve for the Jacuzzi MFM will fit the FM. If you can send us photos of the valve we can confirm this info.
Reply
I have an old FM jacuzzi sand filter that has a leaking backwash port that is effecting the flow of whole unit. Would the DV6, 6 bolt replacement be just as effective a fix or would a new sand filter be a better fix. Thanks for your time.
Reply
Hi Blair, Given the age of the filter you'll be better off replacing the entire unit in the near future. But since at this time you only have a minor problem that can be easily fixed by replacing the valve with the TM12JL valve, you can do just that at this time.
Reply
I have a DV 7 - POS filter dated 06 Jul 05. The lever changing flow direction has failed. What do i Need to do to fix it?
Reply
Hello, You may need to replace just the spring, but if you would like to save time you can purchase Dvk7 Complete Cover Kit replacing the spring and top part section.
Reply
Hi,
I purchased a house with an existing jacuzzi filter. It says FM on the front (not MFM). The back says model is 20FM (no mention of MFM), spec B. The housing for the gauge has cracked so I believe I need a new multiport valve.
What options will work for this filter? A friend has a Jacuzzi laser sand filter who doesn't need it - would their valve be compatible?
I'm unsure of age. Do you know with this model? Do you think I'd be better getting a brand new one entirely?
Thanks!
Reply
Hi, Graham. I was not able to find any info on a Jacuzzi FM filter. If you can get me the part or model number off of the valve I can locate a replacement.
Reply
All I know is that mine is a Model 190L, Will this fit and does it come with the basket at the end? Also mine seems to measure 7.5 inches onto the filter, not 8 as stated on measurements.
Reply
Hi, Ronald. This TM12JL valve will fit the Jacuzzi 190L Bolt-On Style sand filter
Reply
I need the multi valve for my Praher model # tm-12-L I see many jl is this the same? mine is a 6 bolt
Reply
I have a jacuzzi dv assy 6-pos 1 1/2" TM12JH8
Model number: 39258509
It has cracked and I'm looking for a replacement but I don't know which will fit
Reply
Hi,
I have a jacuzzi DV 7-pos Serial number 009404 on my filter now. Will this be the correct replacement?
Reply
Hi, Paul. We're unable to cross reference items using their serial numbers. However, this valve will replace the bolt-on DV 7-POS Valve.
Reply
Have an aged Jacuzzi ST-24 Filter with top mount valve. Valve is leaking to the waste when on filter.
Do you have a rebuild kit for Jacuzzi ST-24 or what we could use to replace the valve?
Reply
Hi, Kirk. You will need to provide us with the valve model to find out if a rebuild kit is available. If you're unable to locate the valve model, then you'll replace the entire valve.
Reply
The valve is as shown correct, will the old parts fit on the new valve or do you sell a complete valve with all the parts listed.
Reply
Hi, Pete. The valve shown is the actual product. You will have to replace the entire valve to ensure functionality if you currently have another brand or model valve.
Reply
I have a Jacuzzi Laser 160L sand filter and I replaced the spider value becuase of water leaking from the backwash port, however it didn't seem to fix the issue. Looks like I might need to replace the filter, will this fit?
Reply
Yes, this valve will work on the Jacuzzi Laser 160L model filter.
Reply
I have a jucuzzi alt140 would this be the correct valve?
Reply
will this part replace direct fit the older jacuzzi filter valve
Reply
Hi, Kelly. Based on the current style valve you have some modifications will have to be made to make this valve fit. I will need the model of your sand filter and valve model to confirm.
Reply
Does this fits Model :Jacuzzi DV 7-POS, Order No 39263009? Also does it comes with washer to fit the bottom part of the sand pot?
Reply
Hi, Rajamani. The Flange Gasket is included with this aftermarket valve which can be used as a replacement for Order # 39263009.
Reply
Hi. Will this replace the MFM20 valve? because parts number are not the same as Jacuzzi. Please advise
I have an old Jacuzzi MFM 15 sand filter. The valve assembly is held on by six bolts and the valve assembly no longer diverts the water correctly so that water is always pouring out all ports. Will this valve assembly fit my filter and does it come with a pressure gauge? Also is this enough filter for a 24' round pool?
Hi, Robert. This Top Mount Valve - TM-12-JL7 will fit your model filter. We also have the Original Valve - 39258207R available.
Reply
My valve has a basket assembly attached to it. Does that come with this valve? Also my pumo is a 1.5 horseppower with 65 gpm output. I that a problem? How much is the original replacement valve?
Reply
Robert, This TM-12-JL7 includes a basket, you will just have to remove the original one. This valve will also work with a flow rate of 65 GPM. The original valve 39258207R is priced at $99.99.
Reply
I have the same Jacuzzi MFM 15 Sand Filter and valve assembly pictured here. I need a replacement spider valve gasket for this valve. I get water from every port all the time. Filter is not being used in this current state. Do you sell this gasket?
Reply
My handle broke on my multivalve port. It just moves freely. Do I need to replace the whole thing or just the handle.
Will this fit Laser 192 with Jaccuzi Value - 6 Position
Hi Drew, could you let us know if you valve screws on or clamps on with a clamp? Also approximately how old is your filter?
Reply
Hi Please see attached pic. It looks like its bolt on rather than clamp on. The filter is about 15 years old.
Hi Drew, thanks for the photos those were helpful! You can use this 4625-80 Praher Valve as a replacement for your valve as it will mount to your filter tank fine. However this valve does not have the plumbing ports in the exact same spot as your old valve so you will have a little re-plumbing. If you would like the exact valve as you currently have then you will require this Jacuzzi DVK6 Valve at $156
Reply
by looking at the picture, it appears that both intake and discharge ports are on the same side. Is this accurate? The valve I am replacing has intake on one side, and discharge on the the other side.
Reply
Phil, yes, the pump intake and pump return port are on the same side of the Top Mount Valve, Jacuzzi DV6/DV7 Bolt-On Generic - TM-12-JL7 and waste on the opposite.
Reply
I have an MFM 17 and I believe this would fit. My question is, do I need to purchase any other parts or do I just unbolt the old and install this in its place. I don't want to order and find out I need gaskets and all kinds of other parts too.
Reply
Hi Mike, Typically all you need is this valve just replace the old valve with this new valve. To be on the safe side you may want to get the gasket that goes between the valve and the filter tank. If you may view that o-ring by clicking this link.. MFM Valve to Tank Gasket
Reply
I need a multi port valve Model # 39263105 (Jacuzzi) V-Fling Tri serial # B7-0004607 the handle will not turn.
Reply
Hi Sandy, This valve here is the generic version of the Jacuzzi 39263105 and will work as a replacement. The plumbing port configuration on this valve is a little different from the original so you may have some slight re-plumbing. If you would like the Original Valve then you view or purchase that valve by clicking this link here Jacuzzi DVK7C Valve that valve will have the same plumbing port configuration as your current valve.
Reply
I need the vale assembly with 2" inlet and outlet ports for my Jacuzzi MFM24 sand filter. What size ports are on this valve assembly?
Reply
Hi, Mike. This valve has 1-1/2" ports, there is not a 2" valve available that can be used with your model filter.
Reply
My sand filter does not have any model number so I’m not sure what part to buy. I need the top part with the lever and I need the inside stuff with the laterals For some reasons the laterals keep coming off and all the sand blows into the pool. I have attached pictures so hopefully that helps
Hi, Vickie. You have a Splash Pak - Sand Filter which is available in 3 different sizes. The link provided will direct you to that page that list the parts.
Reply
I have a sand filter purchased in the late 80s. The model says Jacuzzi 24FM.
I need to replace the top mount as it is cracked and I no longer have a pressure guage or backwash window now. I am hoping something fits because I don't want to change the whole filter,
Thanks!
26-253-1035 is the correct alternate valve manufactured by an aftermarket company. The OEm is mfg # 39-2628-03-R (26-105-1018 )
Reply
I have a Jacuzzi MFM20 and need a new 6 way valve...which model number do I need? I’ve included photos of the filter and valve I have. Thanks!
Hi, John. This Valve can be used, however, you will have to replumb your system or use the Valve, Dial 6 Position - 39258306.
Reply
Hello I also have this identical 6 way valve for the MF M20. Do you have a rebuild kit for my valve? All O rings seals etc.. in one kit?
Reply
I need to find a 7-pos DV basic assy.
Model # 39263009 do they have that anymore or something compatible
Hi Kim, the replacement Jacuzzi multiport valve model 39263009 is part number 26-105-1018.
Reply
I have a Jacuzzi DV 7-POS. I am
Needing the main gasket and the sight glass gasket. Or I could buy a whole new top piece if you know which one I need
Reply
Hi Jesse, you can purchase the complete top cover assembly and sight glass separately as well. You can view those on keys D and 17 on this parts diagram.
Reply
I am looking for a replacement dial value for a Jacuzzi laser sand filter
would this work
Reply
There should be a label on the side of your filter, could you supply us with the information from that label? Simply click the reply link below to provide the requested information so we may make the appropriate suggestion.
Reply
I have a Jacuzzi sand filter MODEL 24LT3 SERIAL JV that needs a new valve handle or valve assembly.
Hi, Geoffrey. The Handle for your Jacuzzi 2" Cast Iron Dial Valve has been discontinued. You can replace the entire valve with P/N TM-12-JL7 or 39000302R.
Reply
i need a replacement FOR jacuzzi 39258509 key cover AND HANDLE?
Reply
Hi Chevonne, there are a few valve cover and handle assemblies for the Jacuzzi multiport valve model 39258509. Please see the Pentair - Praher 1 1/2" TM-12 & SM-10 parts diagram where key number 1 lists the options.
Reply
I have a Jacuzzi 190L sand filter and I'm looking for a replacement head, is this item the best replacement?
Hi Dan, the best replacement for your 190L Laser Sand Filter is this DVK-6 Top Mount Valve Bolt-On Style - 39258800R. Parts for it are on this webpage for the Jacuzzi 6-way dial valve.
Reply
