Water leaks out since I unscrewed and replaced
Reply
Hi Cathy, Sometimes these bands hang up as you are tightening them. We recommend that you tap them with a rubber mallet as you are tightening them down so they seat properly. Also check that the tank O-ring is not damaged and is seated correctly.
Reply
Will this band replace an American product # 602785?
Reply
Hi Beatrice, I was not able to cross reference p/n 602785 to a specific American Product filter or part. This clamp will only fit the Pentair Nautilus FNS D.E. or Pac Fab Sea Horse Fiberglass Cart filter's. If you can provide the model or name of the filter you have we can try to locate the correct clamp.
Reply
I have a Pentair American filter for my in ground pool It is a DE filter. The filter band was made by American Products, Inc. I need to know if the 195351 will fit the filter. Thank you
Reply
We would need to know which specific model filter you have in order to cross reference parts for it. If you are not sure of that model then please send in images of it through our support request page.
Reply
My band has 19-5350 stamped on it. Is this the same part number? I see that they now have a "Plus" model that is the SAME filter model number (FNS48) but has the word "Plus" in the name... and is about an inch wider, so I'd like to be sure about the part number :-)
Reply
Will this fit a Nautilus NS-24?
Reply
No, this not the correct clamp for the NS-24. The correct clamp assembly is part number 4600-1011.
Reply
Will this band fit model NS-48?
Reply
No, this not the correct clamp for the NS-48. The correct clamp assembly is part number 4600-1011.
Reply
Will this clamp work on a PACFAB FMY 150 filter?
Reply
Hi Mike. I am sorry to say that this clamp will not work on your Mytilus FMY150 Cartridge filter - the part you need for your filter has been discontinued.
Reply
Will this part fit a Pentair Nautilus Plus Stainless D.E. NSP 72
Reply
Hi Aaron, this will not fit your Pentair Nautilus Plus Stainless D.E. NSP72 filter, but this Clamp Assembly Band Ring - 191805 will be perfect.
Reply
Will this fit the Purex Triton Nautilus FNS 36? Please let me know and thanks!
David
Reply
Hello David. The Pentair Pool Products Band Assembly 195351 is compatible with the Pentair/Purex Triton Nautilus FNS 36. Attached please find a Pentair/Purex Triton Nautilus FNS exploded parts diagram for reference. Pentair Nautilus FNS D.E.
Reply
I am looking for a 19-5350 Pentair band for my pool filter. I see you have a 195351. Will this part fit my filter?
Reply
Hello Laura. The Pentair Pool Products Band Assembly 195351 is the compatible replacement for the Pentair Band Assembly 195350.
Reply
