My existing DE Filter is listed as follows: P/N 190029 Rev. D, Ser. #: 08 09 00 01, Pentair pool products, Model # C. I need only the bottom tank to be replaced, would this be the correct item?
Reply
Hi Rainier, Based of this information I beleive you have the FNS Plus 60 Filter, can you double check your label to see if this is correct. If so then this would be the correct bottom tank.
Reply
My Pool Filter is now 16 years old leaking from the bottom. I wanted to confirm that this is the correct replacement part. The label states Purex Triton FNS Plus and it is the 60 square feet. I assume it is correct, and is it a virtual drop in replacement by unscrewing the input and output lines and just dropping the new unit in place, putting the cartridges back in and putting on the old top?
Reply
Hello, This is the correct tank bottom assembly for the FNS Plus 60. Please keep in mind that the newer bottom may or may not line up exactly to your 16 year old top due to the way filters contract and expand.
Reply
Hello, In need of a new bottom tank for my Pentair FNS Plus 60, P/N 190029 REV. D serial # 0809000102 model #k...will this bottom tank be compatible with mine?
Reply
Yes, This is the correct base for the FNS PLUS 60.
Reply
Hello, I have the older model pentair fns plus tank P/N 190029, serial #0809000102 model #K. Wanting to know if I order the bottom tank ONLY if it will be a fit for my current top I have. My current bottom tank busted and cracked and no longer is useable.
Reply
Not sure how old your older filter actually is. We went back to 1998 thru the mfg & are not able to confirm the tank # you are giving. If your filter is truly that old we really can't recommend just 1 half of the filter tank to due possible slight mold changes, we would have to recommend a new filter complete would be in your best interest.
Reply
I have an FNS Plus 60 filter and need just the lower bulkhead fitting (the inlet). Is this available as a separate part. Someone leaned against the tank too hard and this fitting is cracked at the threads & leaking badly when the filter is running.
Reply
I have a 14 yr old FNS Plus 60 D.E. filter and I need to replace the Tank Bottom Assy # 170018 due to a crack in its wall. Will it mate to my existing Lid Assy #170022 without leaking? Also, should I replace the tank clamp o-ring as well?
Reply
part #170018 is the tank bottom for the FNS60 Plus -
Reply
If your filter is 14 years we really have to recommend you replace the unit complete. Due to the mold designs there is no way we can guarantee a new tank will make perfectly with your 14 yr old lid.
Reply
However, isn't thats what the clamp o-ring is for - to account for differences in mold variation and concentricity between the lid and tank bottom?
Reply
Unfortunately no as the O -ring is more for sealing the lid to the base and not for accommodating warpage differences between them.
Reply
I have a De Filter 60 sgft pentair and the plug at the bottom keeps blowing off. I think it may be the bottom part of the filter hole might be stripped from tightening so many times. I have replaced the plug several times. I also put teflon tape and this other bonding stuff which holds it for maybe a month but then it blows off. Is there anything i can do before I replace the unit and is this common?
Reply
Hi Michelle, this is not that common however is possible. The only real thing you can do that is left is to PVC cement it to the drain plug hole which still may not resolve it.
Reply
How can i tell how old my de filter pentair is?
Reply
Hello,Thank you for contacting Inyopool products!The only way to tell is to contact the manufacturer at 1-800-831-7133 and provide them the serial number. If you have any further questions or concerns please do not hesitate to contact us back. Our customer service agents are always happy to help! Thank you and have a great day.
Reply
does p/n 3901200 replace p/n 190003 on a pentair fns60
Reply
Hello Eileen. Pentair Pool Products part number 39010200Z is the tank body O-ring for the Pentair FNS Plus Filter. The Pentair Pool Products part number 190003 is the Clamp Kit for the Pentair FNS Plus Filter. Clamp Assembly, PT5000/Clean & Clear Plus/FNS Plus - 190003 Tank Body O-ring, Generic - O-333 Pentair FNS Plus D.E. Filter
Reply
