i have a Jacuzzy Mod #39263009 valve . It is on a lazer sand filter #250L need complete valve Part #-??
Reply
Yes this valve here would be the direct replacement for the Jacuzzi Laser 39263009 Top Mount Valve.
Reply
I've got a crystal bay sand filter #94087517, I believe it's 190 liter with part #39254305 valve. Is this the replacement valve needed for my filter?
Reply
JD, Part # 39254305 crossed reference to the Dvk-6 Top Mount Valve.
Reply
I have a jacuzzi 250L-7 filter with model # 94086250.
The valve is leaking and I cannot get the pin out of the handle so that I can replace parts so I want to just replace the entire dial valve assembly. It is a seven position valve and bolt on. It has no part or model number. Could it be the DVK-7 and if so, do you carry it (or whatever it may be)? Thank you.
Reply
Yes your filter would require the DVK-7 valve and this would be the correct valve.
Reply
Will this valve work on a MFM17 jacuzzi filter?
Reply
Hi Jason no this would not be the correct valve you would require the Jacuzzi MFM17 Backwash Valve.
Reply
My valve is a jacuzzi #39263100. The spring inside the valve handle broke in half causing water leak. I'm assuming the entire assembly needs replacing? What valve is suggested.
Reply
Yes I would suggest replacing the complete valve assembly and this would be the correct replacement valve for the Jacuzzi 39263100 valve.
Reply
I Have a Jacuzzi Laser II 192 Sand Filter. I want to replace my current Dial Valve. My dial valve does not bolt on, it is fastened by 2 c-rings that bolt together to form a circle. What is the correct replacement valve for this style?
THank you
Reply
Hi Marty, Here is the Laser Filter Clamp Style Valve you would need, the valve does not come with the Valve Clamp which is purchased separately.
Reply
Will this dial value replace the one on my Jacuzzi 190L filter (model number 190L-S1LR6-HK6)? If it doesn't, can I ship the dial value back for a full refund?
Reply
Hello, This valve will bolt onto the Jacuzzi 190L sand filter. If it does not fit, please call us to request an RMA to return the valve for a full refund.
Reply
I have a jacuzzi 225 Laser sand filter ,approximately 7. years old. I need to replace the 7. way diverter valve . Can you tell me the part # for this older model Thanks Jim
Reply
Hi Jim, If your Jacuzzi Laser valve bolts on then you would need the valve on this page. If your valve clamps on then you would require the Jacuzzi Laser Clamp on 7 Way Valve.
Reply
Is this a direct replacement for the original Jacuzzi Laser 250 Sand filter? Are the bolt circle and pattern the same as the original? Two of the threads on the inlets and outlets seem reversed from my current head. (Male oppose to Female)
Reply
Hi Tony, this is a replacement for the original Jacuzzi Laser 250 Sand filter. This is the bolt on valve and not the clamp on valve. The pattern for the bolt holes should be the same as your current pattern. It is possible that the ports have been re-positioned on this valve from your original configuration which would mean some minor re-plumbing.
Reply
I have a Jacuzzi 160L laser sand filter will this replace it? It looks like the same one. Is it in stock?
Reply
Yes this is the correct replacement valve for the Jacuzzi Laser 160L filter and yes this valve is in stock.
Reply
I have a jacuzzi FloPro sand filter model SS160. With is valve work me?
Reply
Hi Terri, you would require this Jacuzzi FloPro SS160 Valve.
Reply
I have a jucuzzi 39254305 6 pos blk valve on a 225L filter.
What model do you have to replace it?
Thanks
Reply
Al, The Jacuzzi 7 Position Dial Valve (39262803R) is the correct replacement for your Jacuzzi Laser 225L Sand Filter.
Reply
I bought a new DVK7 as a replacement. Do I need orher parts to complete the replacement? Thete apper to be a basket and diverter on the old valve assembly.
Reply
HI Terry, No other parts is needed if you're replacing the 7 Position Dial Valve (39262803R) on you Jacuzzi Laser Bolt on Sand Filter. The parts you're referring to is part of the filter not the valve.
Reply
I have a jacuzzi pool filter and most of the label is gone. the only thing I can see is the part of the label with the Model #'s and there is a hole punched in the 225L spot. I need a new valve head and need to know which head will I need.
Reply
I have a Jacuzzi Laser Sand Filter 225L, 6 position dial valve Part No. 39-2572-09-R what would be the correct replacement part. Is there a retro fit kit available? DV6 Repair Kit Part Number 39-2622-09-RKIT
Reply
Hi Russell, The DVK-6 Top Mount Valve, Current Style (39258800R) or the 7 Position Dial Valve (39262803R) will be the correct replacement valve. If you just want a kit, the Cover Kit-Key Cover & Hndl. Assy (39262209rkit) will replace everything except the valve body.
Reply
I have a jacuzzi laser 11 192 pool filter need to replace the top valve the current on is a 5 position what is the replacement for this
Reply
Hi, The 7 Position Dial Valve (39262803R) will work on the Jacuzzi Laser 160L, 190L, 225L, 250L - Bolt On Style Filter.
Reply
I just broke another one of these valves. The threaded fitting that comes from the pump to the valve splits when I screw in the male threads of the hose that comes from the pump. I know I will have to purchase another valve, but do you have a hard hose that will connect to this valve and pump that has a swivel female fitting? If so, please provide me with the information to purchase one.
Reply
Hi Lloyd, You will need (2) Male End Union 1 1/2" Mpt (417-4060) depending on the pump you have and a Pump To Filter Hose Assy. 22" Tank (155728). The hose does not swivel, but has a union nut fitting that will screw on the the male end union.
Reply
I have an older Jacuzzi 7 position valve model # 39263009 with a 250L Laser sand filter which is leaking from the back wash hose port. Is this the correct valve and diverter to buy ?
Reply
Hi Scott, yes this would be the correct replacement valve for your Jacuzzi 250L Laser sand filter.
Reply
I have a Jacuzzi 7 position valve on a proline sandfilter that's about 13 years old. what valve would replace it. It has the clamp type locking ring with the inlet and outlets on 1 side and the waste line on the other.
Reply
Hi Ken, The DVK-7C Valve, Clamp Type (39263020K) and the Clamp Assembly (85813903) if needed will be the correct items you will need.
Reply
I have a DvK7 valve but the spring that closes the handle is wekened so the valve leaks. Can I get a relacement spring or must I change the vale ?
Reply
Hi Paul, You can just replace the Compression Spring (16026205R000) but I would recommend getting the Diverter Repair Kit DV6/7 (39251509RKIT).
Reply
I have a 1b valve dvk7 39-2628-03 and there is one said 03r. the problem is I have a pin hole wright near the pressure gauge and it leaks water and I have problem with air do I need a new valve and what one and do you have one thank you
Reply
Hi Ted, I would recommend replacing the complete valve. The 7 Position Dial Valve (39262803R) would be the correct replacement.
Reply
I gave you the wrong number for the valve ineed a clamp on not bolt on so I have a number39-2630-20r with o ring is this the one and do you have them.it is a lazer tank
Reply
Hi Ted, The DVK-7C Valve, Clamp Type (39263020K) would be the correct valve.
Reply
I have a old MFM 20 sand filter. The valve is just old and the handle broke. It has a little leak from a split at the bottom through one of the bolts.. Will this valve work on my filter?
Reply
Hi Christopher, The Jacuzzi 7 Position Dial Valve (39262803R) can fit onto the Jacuzzi MFM 20 Sand Filter.
Reply
i have a model 39263009 Jacuzzi sand filter DV Assy 7 Pos 1-1/2 NPT. It is weaking on the top where the 6 screws are. Is there a gasket that goes under it that can be replaced?
Reply
Hi Marsha, There is a Valve Cover O-ring (355051272) that has gone bad cause the valve to leak. You can also find other parts via the Jacuzzi 7 Way Dial Parts.
Reply
Hi there, purchased a Jacuzzi Force pump from you all last month and now the sand filter has a leak. I have to replace the top mount valve because the leak is coming from a "hair line crack" in the threading. Here are the numbers I got off the valve tag: Jacuzzi 39263100 Model: DV Assy 7-Pos 1-1/2 Npt Tri, serial number B7-0000365 Date: 02 December 2011. Is this the correct replacement that I need? I'll order as soon as you let me know. Thanks.
Reply
Hi Michelle, This 7-POS Dial Valve will be the correct replacement valve for the Jacuzzi 39263100 valve.
Reply
My valve decal on top has faded and peeled. Can I order a replacement sticker? Do you have a part number?
Reply
Hi Nate, You will have to replace the DVK-7 Cover (39262605R).
Reply
I have an older 160L sand filter that needs a new top mount valve. The one on it is a 6 position valve. What replacement valve do I need to order? Thanks
Reply
Hi Linda, You would require the 6 Position Jacuzzi 160L Valve.
Reply
I asked which Valve Kit I should use for my Jacuzzi Laser 225 Sand Filter and you answered that I can use 39262803R 7way but this one 39258800R that is a 6way it's exactly like mine.. I Rather have the same, am I wrong..?
Reply
Hi Aurora, Yes either the 6 way or 7 way valve can be used on the Laser 225, so yes you would be fine with the 6 Way 39258800R Valve
Reply
I have a 2006 Jacuzzi 7 pos 250L that is leaking to the backwash when in the filter position. However my head is connected to the tank via a collar, not 6 bolts. Will this work as well?
Reply
Hi, You have the Jacuzzi Laser 250L which is the clamp style filter so you would require the Jacuzzi Laser 7 Position Clamp Valve here is the Parts Breakdown for the Jacuzzi Laser Clamp Filter which you may find helpful to print for your records if you ever need additional parts in the future.
Reply
I have an older jacuzzi laser sand filter 190L DV6. I am looking to replace just the dial valve gasket (spider gasket). I can not get the model number from filter due to fading. Can you pleas let me know what i need to get. Thanks
Reply
Hi Darsey, You can replace just the Key Assembly w/ Gasket - 39068705R or the Diverter Repair Kit - 39251509K to resolve your issue.
Reply
I'm looking for a 7position valve for a Jacuzzi tidewater 94083318 filter I believe the filter model is190 LIL-6 and I think the correct valve#39251608 I hope you can help Thank you.
Reply
Hi Bob, the #39251608 is for the cover only on the valve and this part is no longer available. I would suggest this complete valve 39262803R as it is the correct valve for the 190L Jacuzzi Tidewater sand filter.
Reply
What spider gasket do I need for a Jacuzzi flo pro ss160?
And where do I get one? Thank you
Reply
Hi Cindy, For your Jacuzzi Flo Pro SS160, you will need this Jacuzzi Flo Pro SS160 Spider Gasket which we have in stock and we can ship out right away. We also carry many of the other Parts for your Jacuzzi Flo Pro SS160 Valve.
Reply
what size backwash hose do I need for this unit?
Reply
Hi Donna, For this valve you would need 2" Backwash Hose.
Reply
I have an old Jacuzzi laser sand filterwith 7 way valve. -- the model punched out on the filter looks like 225L - will this valve work for my filter?
Thanks
Brenda
-
Reply
Sorry for the delay. Yes, part number 39262803R will fit all the models of Jacuzzi Laser Sand Filter ( MODEL LASER 160L, 190L, 225L, 250L )
Reply
Hi, I have a Jacuzzi 192c-7c laser sand filter. It has a DVK-7C valve. I'm looking for the decal on top of it. Mine is almost impossible to read. Where can I get one ? Thanks Thomas
Reply
Hi Thomas, The decal or cover is not available, you will have to replace the DVK7 Complete Cover Kit (39262605RKIT)
Reply
Just replaced the sand on my Jacuzzi Laser sand filter (L225) with a 7-position valve. Replaced the O ring (13-078-09-R) and lubricated it before I put it on. Put it back together being careful not to overtighten, however it now leaks profusely. It is like the adapter flange and dial valve are not mating well. Took it apart several times to try and reseat, but with the same result each time. Any ideas? Thank you.
Reply
Hi David, You may have purchased the wrong size o-ring, you need p/n 47-0366-47-R. Also, the L225 model is the clamp style filter not a bolt-on which this 7 Pos. Dial Valve (39262803R) is for.
Reply
I have water constantly flowing out of the backwash port. Is this the part I need, or do I need a whole new filter?
Reply
You don't need a whole valve or a whole new filter, just need to replace the spider gasket to your valve.
Reply
what the best way to replace the spring on a 190L
Reply
Hi Steve, Our How To: Replace a Pool Multiport Valve Spring guide will sow you how to replace the spring in your Jacuzzi valve.
Reply
My question is related to a previous asked question addressed on 7/23/2016.
On my Jacuzzi sand filter, the drain-back flush port leaks when it should be turned off. What parts do I need to order from you? O-ring? Gasket?
Reply
Hi Ed, You have 2 options that will resolve the issue that you're having. Option 1) Diverter Repair Kit DV6/7 (39251509RKIT) and option 2) Dvk7 Complete Cover Kit (39262605RKIT).
Reply
I have a laser jacuzzi 225 that leaks from handle and backwash. What do I need?
Reply
I have a 190l Jacuzzi filter about 18 years old & retailer says they can't get (don't want to try to get?) parts. I need A DV6/7 repair kit (sold assembled) according to the Jacuzzi manual. Is your 39-262803-R a match?
Reply
Hello David, If you need the Diverter Repair Kit Dv6/7 (39251509rkit) - 39251509K, you can click on the link to view the product page. The Valve, Dial, 7 Position - 39262803R is a complete replacement 7 way valve.
Reply
When purchasing the 7 Position dial valve, is the gasket that is needed to connect to the sand filter tank included? It does show the gasket in the parts diagram. I just want to be sure.
Reply
Hello, The o-ring is included.
Reply
Would a replacement sticker be available for a Jacuzzi Laser sand filter 190l ?
Reply
Hi, Shadow. Unfortunately, the valve decal is not sold separately. You will have to replace the DVK-7 Cover - 39262605R000.
Reply
I have a older Jacuzzi Laser sand filter,model 160L.....not sure how old.Leaks from handle and running out of backwash bad,so I figure replace it all..Will it bolt up correctly?? thank you.
Reply
Hi Jim, Yes the 39262803R would be the correct replacement valve for a Jacuzzi 160L Laser Sand Filter.
Reply
will this valve fit an older Jacuzzi filter? It's marked as a 160L model.It is leaking from the handle and pouring out the backwash.A key assembly with the spider gasket would probably fix this,but being so old I'm not sure how easy(or hard) it is to fix.is there a video on replacing the key assembly? thanks for your help.
Reply
Hi Jim, Yes this valve would replace the valve on an older Jacuzzi 160L sand filter. Here is the Jacuzzi 160L Key Assembly Repair Kit unfortunately we do not have a video on this replacement but it is a pretty easy job.
Reply
After removing the old sand and replacing it with new sand the top wont connect to the lateral pipe it is a Jacuzzi laser 160.
Reply
Hi, Ron. I haven't heard of this happening, I would recommend checking the diameter of the standpipe and valve.
Reply
will this valve compatible with a jaccuzzi RMST-24 tank? What can be done to repair stripped mounting hole threads on tank for the valve, I've already made them larger and retapped threads.
Reply
Earl, Yes, this will fit the RMST-24. If the mounting holes are stripped and have already been re-tapped, you may have to replace the entire filter. A new top mount sand filter will come with a valve.
Reply
i have a Jacuzzi Mod #39263009 valve . It is on a lazer sand filter #160L. I need to replace it. Is this the correct one?
Reply
Yes this would be the correct replacement valve for a Jacuzzi Laser 160L
Reply
I have a Jacuzzi laser sand filter, model 250L-7, with 1-1/2" piping. Need a new Valve, Dial, 7- position...what should I purchase?
This item on your site shows 2" piping.
Please clarify.
Reply
I have an old Jacuzzi multiport valve on a laser sand filter. Valve has a "test" position, but no "recirculate" position. What setting do I use to recirculate when I floc the pool?
Reply
Hi. The Whirlpool Position is the position you will have to use when bypassing the filter.
Reply
I have a Jacuzzi 250 Laser sand filter can you please clarify if this is the replacement head that is needed... I have a small crack where the pressure gauge was tightened too much.
Reply
Hi, Leslie. This 7-Pos Dial Valve - 39262803R will fit the Laser 250 Bolt-On Style Valve. There is also a Clamp Style Valve which is Model # 39263020K. You will have to find out which style Laser filter you have.
Reply
Currently looking at replacing the upper assembly on a Jacuzzi Laser Sand Filter 160L. Just want to verify that this will fit on the jar properly?
Reply
Hi, Ryan. This 7-POS Bolt-On Valve will fit the Laser 160L filter.
Reply
We have a Jacuzzi Sand Filter #39263100, Serial B7-0001817, DV Assy 7-Pos 11/2 Npt. It has cracked and we need a new assembly. What should I order?
Reply
hi there i have a jacuzzi filter system and need a spider gasket replacement ,The model number is DV ASSY 7-POS 1-1/2-FLN
Order number 39263105. Serial number C-0012424.
hope you can help me
thanks Rod
Reply
Hi, Rod. The replacement gasket is not sold as a separate part, you will need to purchase either the Rod Rod Diverter Repair Kit Dv6/7 - 39251509RKIT or the Key Assembly w/ Gasket - 39068705R.
Reply
Hello
Can you tell me if this valve assembly will fit a Jacuzzi Laser 225 sand filter? The existing valve assembly bolts onto the body of the filter.
Thank you.
Allan
Reply
Yes, that valve is compatible with the Jacuzzi Laser 225L filter.
Reply
I just replaced the laterals and stovepipe assembly.I put the mpv back on,tightened it down and now it is leaking bad where the mpv and the top of the filter meet..yes the gasket is in place,and I don't want to overtighten the mpv bolts..HELP! ( I bought the mpv last year from you and the assembly also). thank you!
Reply
Hi, Jim. Check the Flange Adapter and the Flange Adapter O-ring for any defects. Also, make sure that the o-rings are lubricated and seated correctly.
Reply
Hallo passt dieses Ventil auf meine Jacuzzi laser 160 ? Wie lsange dauert der Versand nach Österreich ? lg
Reply
Hi, Jürgen. Yes, this valve will fit the 160L Sand Filter. Shipping to Austria can take 2-3 weeks. Please provide your shipping address so that we can create a quote for you.
Reply
I have a 4500GPH 19" 1hp item #281127530257 sand filter is this the right valve for us
Reply
That item number is not working for us. You may have supplied the serial number. Do you have the model number?
Reply
We need the actual model of your filter, the 26-105-1018 is a bolt on style but the model # provided appears to be a clamp style valve DVK-7C Valve, Clamp Type - 39263020K.
Reply
Clamp type
Hi Joe, Thanks for the photos! You will require the PL1541 Sand Filter Valve you can also find the complete parts breakdown for your system through this PureLine 19" Sand Filter Parts Page.
Reply
Dose this fit model 225L-S15LR6?
Reply
Yes this is the correct replacement valve for the Jacuzzi Laser 225L Sand Filter
Reply
Does this fit correctly the jacuzzi model ST-24
Reply
Hello, This will be the replacement multiport valve you will need.http://www.inyopools.com/Products/07501352028151.htm
Reply
will this work as a replacement for the Jacuzzi ss160 sand filter?
Reply
Hello - the SplashPak SS160 uses a clamp on style valve like the PL0714
Reply
I have a Jacuzzi sand filter model 39263009. DVASSY7-POS 1-1/2NPT I NEED TOP MOUNT FOR
Hello - the proper replacement for your Jacuzzi DVK7 39263009 valve is the DVK-7 Valve, Bolt Type - 39262803R
Reply
I have the Jacuzzi 39263009 on my L250-7 filter. After moving the lever to backwash, I see water leaking from the top around the lever. Can it be fixed or do I have to replace the entire valve. Thanks.
You can replace just the part and my suggestion would be this DVK7 Valve Diverter Kit this should fix your leak.
Reply
Hi -I have the Jacuzzi Laser sand filter with the head model 39263009 that is leaking quite a lot. I’m seeking a professional opinion, should I buy the diverted parts or replace the entire head since it is 20 plus years old? And is this the correct replacement head?
Thank you for your help.
Hi Chuck, Thanks for the photos! There is minimal price difference between the complete valve and the upper handle assemble so I would suggest this 39262803R DVK-7 Complete Valve.
Reply
my current valve # is 23APR93 , for a 190L filter, Which valve, that you carry, is the replacement
Reply
Hi Robert, yes this is a compatible multiport valve for the Jacuzzi model 190L Laser sand filter.
Reply
Hi i have a jacuzzi sand filter model L225 C-7C #39263030 that need replacement.Is this compatible?
Hi Maricris, This is not the correct replacement valve. You will need this 39263030 Jacuzzi Valve
Reply
