Is this part only the cable 18 Meters long and the swivel assembly only without the end connectors?
Reply
Hello John, The 9995861-ASSY 18M Cable CABLE+SWV ASSY 18M DIAG and Swivel with Amphenol Plug on one side and raw wires on the other.
Reply
I have a dolphin nautilus. My dog chewed through the cable approximately half the length. Is this the replacement for that? How difficult is it To replace this part if I decide to do it?
Reply
Hi, his is the correct cable for the Maytronics Dolphin Nautilus cleaner. It's not too difficult to install the cable, it is considered a DIY part.
Reply
I have a triton with the cord coming through the top. My model is 3 years old. Does the cord come with the fittings on both ends? Does it require a dealer to repair or can I do it myself? I am handy.
Reply
Cable 9995861-ASSY is not correct. You want to buy either a 9995872-DIY or a 9995873-DIY cable depending on the type of spring on the motor end of the cable. If your current cable has a metal spring, you want the 9995872-DIY cable. If it has a rubber spring, you want the 9995873-DIY cable. Be aware that both of these cables are listed as –DIY or –ASSY. You want the newer –DIY cable. See our guide on “How to Select the Right Maytronics Dolphin Cleaner Replacement Cable” for more detailed information. These –DIY cables are easy to replace. Take the top off to get at the motor end of the cable. Unscrew the white plug that holds the plug into the motor. Then pull out the plug. When you replace the new plug, it is slotted so there is no question about how it goes in.
Reply
I have a dolphin Atlantis with a bad cord.
Do you have the 9995861 cord with both end assemblies and spring attached?
Reply
Hi, Clay. This Cable - 9995861-ASSY or 9995861-DIY (with Ends) will work with the Dolphin Atlantis cleaner.
Reply
I have a Dolphin Deluxe 4 bought 8/2011. My cable has issues and needing to replace. It does have a swivel.
Reply
Hi, Bob. The cable that you will need for your Dolphin Deluxe 4 is p/n 9995872-ASSY or 9995872-DIY.
Reply
I have a Maytronics Quantum and need to replace the cable. What part number do I need? Thanks
Reply
Hi, Darin. Unfortunately, we do not have a parts diagram for the Maytronics Quantum cleaner yet, you will have to contact Maytronics at 1-888-365-7446 to get the part number of the replacement cable.
Reply
Hi , I have the dolphin DX5s that I left out and my 12 month old rottweiler took liberty with the cable and chewed it apart in a couple places what is the part number for this cable with swivel and are there any additional parts that need to be ordered for replacement.
Reply
I have a Dolphin 5 Deluxe that we bought in 2010. What cable would this need?
Reply
Hi Ellen, You would require this Dolphin Deluxe 5 Cable the 9995861-ASSY is not the correct cable.
Reply
I have a dolphin pro however there is no swivel on the cable. The cable enters through the side of the unit. Do you have the same type of 2 wire cable ?
Hi, For your Dolphin Pro you will require this 3 Wire Dolphin Pro Cable Side Installation and this Dolphin Cable Retro Fit Kit
Reply
I have a dolphin premier with a swivel, which cable do i need?
Reply
Hi Robert, there are a few options that you can see listed at the last two key number 17 options on this Maytronics Dolphin Premier parts diagram.
Reply
Does this cable fir an Oasis Z5 manufactured in 2014?
Reply
The correct cable assembly for the Dolphin Oasis Z5 is the 9995873-DIY
Reply
