?     Asked on 3/29/2016by Inyo Visitor

I have a side discharge (horizontal) Proline SKP 712-2H Model PE71-III-H above ground pool pump. Will your model E71-III-2 fit the filter canister for the Proline I mentioned above? ALSO - does the cord for the E71-III-2 have a twist lock plug? Ken
 Reply

A  Answered on 3/29/2016 by InyoPools Product Specialist Lennox H.

Hi, You will need to order model # AG196-2150T-HTL, which will come with the horizontal discharge and twist-lock cord.
 Reply


?     Asked on 6/6/2018by Cary

I have the same pump listed below. SK P712-2h with a horizontal discharge rather than vertical. Proline P E71-III-H. Motor appears bad but cartridge vessel is fine. Is there a replacement motor for this?
 Reply

A  Answered on 6/21/2018 by InyoPools Product Specialist Lennox H.

Hi, Cary. The Century BN50 is the correct replacement motor for this model pump. 
 Reply


?     Asked on 9/12/2018by Walter

See if you could help me out I have a 2007 pump motor that is starting to slow down . The model is Proline SKP712-2h also PE71-111-H it has a low, off, and high switch, 2hp and Horizontal Discharge please advise on a replacement motor, and Horizontal discharge part. Thank You
 Reply

A  Answered on 9/13/2018 by InyoPools Product Specialist Lennox H.

Hi, Walter. The BN50 will be the replacement motor and replacement parts are listed on the Speck Model E-71 Pump Part Diagram page. If you're looking to replace the entire pump, you will need AG196-2200S-0ST.
 Reply


?     Asked on 4/14/2019by Tim Foley

can you rotate the output 90 deg.
 Reply

A  Answered on 4/14/2019 by InyoPools Product Specialist Lennox H.

Hi, Tim. Yes, the discharge can be rotated. 
 Reply


?     Asked on 6/1/2019by Inyo Visitor

I have a speck E71-111-2 above ground 2 speed pool pump what is a suitable replacement pump for this model?
 Reply

A  Answered on 6/1/2019 by InyoPools Product Specialist Lennox H.

Hi. This E71-III-2 pump will be a direct replacement. 
 Reply


?     Asked on 8/20/2019by Inyo Visitor

I have a proline 2 speed, 1 1/2 hp, with on/off switch, model # PE71-III-V. Is this the correct replacement? 125 v grdg is on the 3 prong receptacle.
 Reply

A  Answered on 8/21/2019 by InyoPools Product Specialist Lennox H.

Hi. This E71-III-2 model pump is the correct replacement. 
 Reply


?     Asked on 9/24/2019by T E Floto

I need the filter basket for this pump PE71-III-V
 Reply

A  Answered on 9/25/2019 by InyoPools Product Specialist Hector F.

The pump basket would be the 5141-100
 Reply