Part # BN25V1
Warranty 1 Year
Dimensions 12" L x 6.5" W x 6.5" D
Alternate Part #'s 0-193262-20, 1510Z-1-EC, 1510Z-1-EKC, 1510Z-1-ESC, 1510Z-1-EXSC, 1510Z-1-XEC, 159862, 159964, 16436, 164950, 165369, 165846, 168507, 168970, 173315, 176505, 177386, 177614, 177748, 177760, 177760PJ, 177769, 177894, 177955, 177961, 178872, 182520, 182718, 182746, 182833, 184307, 184395, 184878, 186884, 187809, 187810, 187872, 187873, 190613, 193262, 193390, 193868, 196035, 1D157, 1D162, 317P239, 317P292, 317P358, 317P410, 317P420, 317P479, 35-6472, 356495, 7-193670-24, 90106543, agl10fl1, B025, B029, BN025, BN25, BN25SS, BO25, C1454, CBT2102, H640, H667, H910, M-181AG, M-191, MTG-H640, S48A46A07, S48A84A04, S48B74A03, S48B89B95, S48C51Z01, S48L2A16, S48L2A26, S48L2A26A1, S48L2A26A2, S48L2A28, S48L2A29, S48L2A38, S48L2A41, S48L2A41A1, S48L2A41A2, S48L2A6, S48L2A6A1, S48L2A6A2, S48L2A6A3, S48L2A6A4, S48L2A6A7, S48L2A6A8, S48L2A8, S48L2A8A2, S48L2A8A3, S48L2A8A4, S48L2A9, SP-1515-Z1B, SP1510Z1TXE, SP1510Z1XEW, SP1510Z1XT, SP1510Z1XTBK, SPL10FL1, SPX1510Z1XE
A.O. Smith 1 HP Thru-Bolt 48Y 115V Motor - BN25V1
Application: Above Ground Pools & Spas Replaces: Sta-Rite, Hayward, American Products, Hydra Bath, Pac Fab, Jacuzzi, Doughboy, Etc... Features: All copper windins, Auto protector, Open drip proof, Stainless steel threaded shaft, Thru-Bolt pump mount, "1081" design, 60 HZ , 115V, HP = 1.0, Full load Amps = 11.8, Frame 48Y, Threaded Shaft
**NOTE THIS MOTOR IS SHIPPED LESS ON/OFF SWITCH. YOU MAY PURCHASE THE ON/OFF SWITCH SEPARATELY BY ORDERING PART # 18374501.**
Note: NOT California Title 20 Compliant.
California Title 20 Compliant Options:
Will this motor replace a Splapool pump motor? Name plate data is 1 HP frame 48. RPM 3450 115/230 VAC. SF 1.1
Motor Model shows CS4M249I4L A seperate model number shows 72747N C
Manufacturer is Ningbo Splashpool Appliance Co.
Hi, Tim W Hatch. This motor will not fit, we do not sell a replacement motor that for the CS4M249I4L.
I had our pool winterized and the people who did it took parts with them. I am trying to open the pool myself and and finding it difficult without the parts. I think they took drain plugs out of the motor. Is that possible? If so, how do I get replacements? I have a Regal Beloit motor BN25V1. It's leaking from a hole in the back and a second hole behind a filter housing. Can you help?
What is your pump model and I can recommend the correct seals and gaskets you need to eliminate the leak. If you do not know then you can attach a picture and I can identify it for you.
I have a DJAYEA STA-RITE HOT TUB THAT I NEED A NEW MOTOR FOR. DO YOU HAVE A REPLACEMENT?
Wiring for BN25V1. Black, white and green. No line listings just terminal 1-6. I know green to ground. Black and white?
Hi Russell, The "black" wire goes to the L1 terminal, the "white" wire goes to L6 and the "green" to the ground.
Does this motor come with the power cord and on-off switch?
Hi Dave, There is not a switch on the back of the motor. The on/off switch is part number 18374501 and can be purchased separately. This motor does not come with a cord as normally you would remove the cord off of your your current pump and use it with the new motor.
Does this motor come with a cord? If not, do you supply the correct cord?
The Magnatek BN25 does not come with a cord. For a 115 volt application, if you need a twist lock cord, you can find it here: http://www.inyopools.com/Products/07501352011327.htm or a standard 3 prong cord here: http://www.inyopools.com/Products/07501352015032.htm
Less than 1 hr
Screwdriver, Socket Set, Wrench Set
Pulled the motor and pump off filter system took to garage removed old motor 4 bolts took pump apart 5 bolts and un unscrewed the impeller.
The new motor aligned up perfect new seals and o rings went together like a charm. Took about 20- 25
minutes new motor is so quiet can hardly hear it run.