Does this motor come with a cord? If not, do you supply the correct cord?
Reply
The Magnatek BN25 does not come with a cord. For a 115 volt application, if you need a twist lock cord, you can find it here: http://www.inyopools.com/Products/07501352011327.htm or a standard 3 prong cord here: http://www.inyopools.com/Products/07501352015032.htm
Reply
Does this motor come with the power cord and on-off switch?
Reply
Hi Dave, There is not a switch on the back of the motor. The on/off switch is part number 18374501 and can be purchased separately. This motor does not come with a cord as normally you would remove the cord off of your your current pump and use it with the new motor.
Reply
can I replace this motor with a 2 speed motor
Reply
Hi Juan, You can replace the 1 HP Single Speed Motor (BN25V1) motor with the 1 HP 2 Speed 115V Thru-Bolt Motor (BN37).
Reply
Wiring for BN25V1. Black, white and green. No line listings just terminal 1-6. I know green to ground. Black and white?
Reply
Hi Russell, The "black" wire goes to the L1 terminal, the "white" wire goes to L6 and the "green" to the ground.
Reply
I have a DJAYEA STA-RITE HOT TUB THAT I NEED A NEW MOTOR FOR. DO YOU HAVE A REPLACEMENT?
Reply
Hi, We do have replacement motors that will fit the Sta-Rite DJ Series Pump, but we will need the part number off of the motor or the last 4 digits of the model number to confirm which motor you need,
Reply
I had our pool winterized and the people who did it took parts with them. I am trying to open the pool myself and and finding it difficult without the parts. I think they took drain plugs out of the motor. Is that possible? If so, how do I get replacements? I have a Regal Beloit motor BN25V1. It's leaking from a hole in the back and a second hole behind a filter housing. Can you help?
Reply
What is your pump model and I can recommend the correct seals and gaskets you need to eliminate the leak. If you do not know then you can attach a picture and I can identify it for you.
Reply
Will this motor replace a Splapool pump motor? Name plate data is 1 HP frame 48. RPM 3450 115/230 VAC. SF 1.1
Motor Model shows CS4M249I4L A seperate model number shows 72747N C
Manufacturer is Ningbo Splashpool Appliance Co.
Thanks,
Tim Hatch
Reply
Hi, Tim W Hatch. This motor will not fit, we do not sell a replacement motor that for the CS4M249I4L.
Reply
Will this motor replace the motor attached in the picture? It is from a Jacuzzi filter. Also I have water leaking from the shaft going into the existing motor. Will that be a new seal replacement? Thanks.
Hi Frank, yes this is the correct replacement motor for your motor. When replacing a pool motor we do suggest a Seal Kit. Could you send us a few photos of your pump so we can suggest the proper seal kit? If so then please take a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos or quickest provide those using our live online chat feature. Once we get those photos we can make the proper recommendation for your seal kit.
Reply
HI, I have a Hayward that finally gave out. Will this replace the SP 1510-Z-1-XE model I have? Its the Power Flo LX. Picture attached.
Yes, the correct replacement motor for your SP1510Z1XE is the BN25. The shaft seal required to complete the motor installation on the Power-Flo LX is listed as key 3 on the aforelinked parts page.
Reply
Is this the correct motor to replace sp1515z1bc?
The correct motor to replace your 0-187873-20 (1.5 HP SPL) is the BN25V1. The correct shaft seal to complete the motor installation onyour Hayward Power-Flo LX SP1580 would be the Standard Shaft Seal or the Heavy Duty Shaft Seal (For Saltwater Pools)
Reply
I have a magnatech pump with part number 10-186554-0 on it. says 115v 3450/1725 RPM HP:1.0 SPL (2SPD) 8.8/2.6 amp jacuzzi branded will this fit?
Hello Bob. The photo you provided indicates that you currently have a dual speed motor. The Century Motors 1.0 HP Thru-Bolt motor model BN25V1 is a compatible single speed motor. The Century Motors 1.0 HP Thru-Bot Dual Speed motor model BN37V1 is a compatible motor and more closely aligns with the specifications of your current motor. Century 1.0 HP Thru-Bolt 48Y Dual Speed Low Amps Motor - BN37V1
Reply
