A.O. Smith SVRS Guardian 1 HP Round Flange 56J Up Rate Motor - USTG1102A

THIS PRODUCT IS NO LONGER AVAILABLE

Part # USTG1102A

By Century Motors

  5 Average  

Details

Top

Part # USTG1102A

Warranty 1 Year

Dimensions 14" L x 8.5" W x 5.5" D

Alternate Part #'s C48AA07A01, C48AA09A01, C48AA47A01, USTG1102, USTG1102A

Product Description

Guardian Pool Motors with built in Safety Vacuum Release System

A. O. Smith created Guardian® with eMod® electronics, which is listed to the ASME A112.19.17 SVRS standard for suction lift applications. The A. O. Smith Guardian is an electrical type SVRS, meaning it releases the entrapment victim by sensing the entrapment condition and shutting off the motor.

Safety: The Guardian device is completely integrated into the motor circuit. If it is turned off for any reason, the motor is turned off so there is no suction hazard. There are no external parts or connections to the plumbing or electrical system. The new Guardian motors are ETL listed to the ASME A112.19.17 SVRS standard and also comply with requirements for Safety Vacuum Release Systems in the Virginia Graeme Baker Pool and Spa Safety Act of 2007.

Specs:

  • Model # USTG1102
  • Horse Power: 1
  • Voltage: 115/230
  • RPM: 3450
  • Frame Size: 56J
  • Service Factor: 1.1
  • Amps: 15.0/7.5
Motor Dimensions Motor Dimensions
Motor Image Motor Image

Product Specifications

Motor Name:
1 HP USTG1102 & USTG1102A Replacement Pool Motor
HP:
1 HP
Speed:
Single
RPM:
3450 RPM
Volts:
115/230 V
Amps:
15.0/7.5 amp
Service Factor:
1.1
Total HP:
1.1 HP
Frame:
56J
Stock #:
USTG1102 or USTG1102A
Shaft:
Threaded
Overload Protector:
Auto
Dimension Letter:
AG
Dimensions:
11 in.
Commonly Used On:
Hayward Max Flow, Hayward Super Pump, Hayward Super II, Hayward Northstar and Jacuzzi Magnum
Flange:
Round
Top

?     Asked on 1/19/2012 by Guest

I'm trying to replace the motor on my pool pump but all these numbers and abbreviations on the motor label are really confusing me. What do they mean?
 Reply

A  Answered on 1/19/2012 by InyoPools Product Specialist Patrick P.

Replacing a pool pump motor is not as difficult as it seems. You can try looking here. If you need help figuring out what the information on your label means. If you are still having difficulty figuring it out you can call us at our toll free number or you can send us a photo of your motor label here.
 Reply


?     Asked on 1/18/2012 by Guest

I'm trying to find a replacement motor for my pool pump but my model number doesn't match what you have listed as the model number. My model number begins with a C48 and yours begins with an SP. Please help.
 Reply

A  Answered on 1/18/2012 by InyoPools Product Specialist Patrick P.

What we have listed on our chart pages is the pump model number. The model number you have will just identify the motor. If you look on the plastic housing on the pump there should be a sticker which will have the pump model number. You can usually find this by the discharge port on the pump. Once you locate it you can choose the correct replacement motor. Be certain to change the shaft seal and gaskets as needed. You can use our >How to guide if you need help. 
 Reply


?     Asked on 1/12/2012 by Guest

Why should I purchase a Tune Up Kit?
 Reply

A  Answered on 1/12/2012 by InyoPools Product Specialist Patrick P.

A Tune Up Kit includes all of the essential replacement seals and gaskets for the pump. The seals and gaskets should be replaced when installing a new motor on your pump. New seals will prevent the pump from leaking water or losing the prime. A Tune Up Kit will protect your motor and ensure that the pump is working efficiently.
 Reply


?     Asked on 1/12/2012 by Guest

Why do I need to purchase a new shaft seal?
 Reply

A  Answered on 1/12/2012 by InyoPools Product Specialist Patrick P.

We strongly recommend replacing the shaft seal. The purpose of a shaft seal is to prevent water from running down the shaft of the motor and into the motor housing. Water will damage the bearings and cause the motor to fail. A new shaft seal should be installed whenever a motor is replaced. The motor manufacturer can deny the warranty if the motor fails to due to water damage from a faulty shaft seal. To find your shaft seal you will need to visit our Pool Pump Parts Page or the Spa Pump Parts Page and select your make and model.
 Reply


?     Asked on 1/11/2012 by Guest

What is Service Factor?
 Reply

A  Answered on 1/11/2012 by InyoPools Product Specialist Patrick P.

Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)