AquaPod 2.0 - AQL2-POD2



Model # AQL2POD2

By Goldline Controls



Model # AQL2POD2

Manufacturer Code AQL2-POD2

Product Description

Features: 100% Waterproof Built in rechargeable batteries (charging station included) can operate while charging Floats Horizontally Color LCD Display for Convenient Night-time Viewing Full Functional Control of Pool, Spa and Other Outdoor Features Multiple Heater and Chlorination Controls Program Macro/Group Functions Light Dimming Control when available Dual Equipment Capable Similar User Interface to ProLogic and AquaPlus Controls (no learning of new interface)

Note: Must be used with a Wireless Antenna (AQL2-BASE-RF) which installs directly onto the side of the ProLogic, AquaPlus or OnCommand main control unit at the equipment pad and communicates with all other wireless accessories. Only one wireless base required per system. ProLogic or AquaPlus (Rev. 2.6 or higher software). Hayward AQL2-POD2

  • Easy to operate
  • 100% Waterproof and floats horizontally
  • Built-in rechargeable batteries; charging station included
  • Full functional control of pool, spa and other outdoor features
  • Backlit display for convenient nighttime viewing
  • Remotely programs and controls Aqua Logic
  • Multiple heater and chlorination controls
  • Programmable group functions
  • Operates while charging
  • Upgradable software, dual equipment capable
  • System Off button for added safety
  • 3 programmable ”Soft Keys”
  • Light dimming control on incandescent lights (requires dimmer relay)
  • Simple menu navigation – no scrolling through long lists
  • Functions with multiple Goldline Controls wired and wireless remotes
  • Built-in battery – no compromise to waterproof seal
  • Software Version 2.6 or higher is needed for this remote

Aqua Pod 2.0 Specifications:
Range- Up to 500 ft.
LCD Display- Backlit for easy night viewing
LCD Display- Indications Battery life, range, water and air temperature, date, time
Size- 2.43” W x 7.75” H x 1.14” D (3.29” display area width)
Weight- 0.50 lb.
Battery Life- Minimum of 500 charge/discharge cycles
Battery Life Before Charging- 400 commands or button presses
Battery Conserve- Goes into sleep mode 1 minute after last button press
Standardization- ETL

Charger Specifications:
Size- 4.0” W x 3.25” H x 4.13” D
Weight- 0.65 lb.
Power- Plugs into any standard 2-prong AC outlet
Charge Time- 6-7 hours (the unit can be used while charging)


?     Asked on 10/9/2018 by Rod Castillo

I am replacing a faulty hayward AQL2-TB-RF-PS-8 remote control. Will this work with my system as a replacement?

A  Answered on 10/9/2018 by InyoPools Product Specialist Lennox H.

Hi, Rod. Yes, you can use Aqua Pod 2.0 Wireless Remote to replace the AQL2-TB-RF-PS-8. 

?     Asked on 4/14/2018 by Roberto

I have the old Aquapod AQL2-POD that has quit working. Will this item replace it and work with my current Goldline Aqua logic? I already have the antenna. The Main Software Revision is 2.92 and the RF Base Software r3.00. Thanks.

A  Answered on 4/17/2018 by InyoPools Product Specialist Lennox H.

Hi, Roberto. Yes, you can use this Aqua Pod 2.0 - AQL2POD2 wireless remote. 

?     Asked on 8/23/2016 by Mark

I can't turn on my lights using the wireless remote (Aqua Pod 2.0). I keep getting a "Interlock prevents turn on" message on the display. What do I do to correct this?

A  Answered on 9/2/2016 by InyoPools Product Specialist Stacey M.

Hello Mark, Call Hayward 800-657-2287 to troubleshoot and run diagnostic.


Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
4 star:
3 star:
2 star:
1 star: