Part # SP2807X10
Combining maximum performance with durable, corrosion-proof materials, Hayward Max-Flo Pumps are an exceptional value. Now with swing-aside hand knobs and a strainer basket that's 50% larger, the new Hayward Max-Flo Pump is the ideal choice for both new pool and aftermarket installations. When you're looking for both economy and performance, specify Hayward Max-Flo Pool Pump.
Dual Speed Benefits:
|Pump Output (GPM) vs. Total Resistance To Flow (Feet of Head)|
|Model No. Max Rated||20 ft||30 ft||40 ft||50 ft||60 ft||70 ft|
10 Year Warranty on Strainer Housing / 1 Year Warranty on Max-Flo Motor
For high-speed performance data on dual-speed pumps refer to the first Performance Data chart.
Click here for more Hayward Pool Pumps
Are there any 2 speed or variable speed motors available for a Hayward SP2807X10?
Hello Robert, You can replace your 1hp Motor with a 1 HP Full Rate Two Speed Motor W/ Timer or a 1.65 HP Variable Speed Pool Pump Motor Round Flange. When changing out your motor, we strongly recommend you replace your seals as well. We have the Tune Up Kit Hayward MaxFlo with all the seals you need.
Hi, I have a burned out Hayward SPSP2805X7 Pumo and want to replace it with a slightly larger pump for better flow. What are the dimensional differences between my old pump and a Hayward SP2807x10 pump?
Hi Mike, The SP2807X10 model is 3/8" longer than the SP2805X7 because of the motor, other than that everything else is the same. Please make sure that you filter can handle the additional water flow prior to purchasing.
I have Hayward Model: SP2807X10 pump and need to know which tune-up kit to purchase to go with the motor replacement. I have motor Mod: 5KC39PN2822BX and also need to know the replacement motor to purchase,Thank you.
Hi Jason, The A.O. Smith 1 HP Round Flange Up Rate Motor (USQ1102) and the Hayward MaxFlo Tune Up Kit (GOKIT1) would be the replacement motor and kit for this model pump.
I currently have a Hayward Max Flo Pump (self-priming), model SP 1607-2-1MXBK that has suddenly quit moving water. The motor runs but the water does not move. Is it possible that the impeller could have imploded or worn out?
Bill I would check if your impeller is clogged if it is not clogged then I would check if there are any visible signs of damage on the impeller, if so then the impeller would need to be replaced.
I have a Hayward pool pump model SP2807X10. Is this the right tune-up kit?
Yes, the SP2807X10 is the Hayward MaxFlo pump. This is the correct tune-up kit.