Pentair Replacement Motor 1 HP Full Rate Single Speed Almond (unable to ship to California) - 075234S



Model # 075234S

By Pentair Pool Products

  5 Average  



Model # 075234S

Dimensions 13" L x 9" W x 7" D

Alternate Part #'s 075234S, 355022S

Availability Please allow 3 - 4 weeks for delivery - SPECIAL ORDER

Product Description

Pentair Replacement Motor 1 HP Full Rate Single Speed Almond - 60 Hz, 230/115v, 1.65 service factor


?     Asked on 6/23/2018 by Bob

I have a Pentair 7-177450-03, what would replacement be?

A     Answered on 6/25/2018 by InyoPools Product Specialist Hector F.

You can use this motor or even the model B841 replacement motor. 

?     Asked on 6/22/2018 by

I have a Pentair 1.0 hp pool pump model # SF-N1-1A/340038. What motor do I need for replacement?

A     Answered on 6/22/2018 by InyoPools Product Specialist Charlie R.

Jackie, Based on the model number you provided, your replacement motor is B853. We also offer a  Tune Up Kit for your Pentair SuperFlo pump HERE

?     Asked on 6/11/2018 by BRYAN MOXLEY

I have a Pentair WhisperFlo Model No. WFE-24, 1-HP, Serial # 1-10-E05, Service Factor 1.25, Part # B-177449-03, Almond in Color What motor would replace this one?

A     Answered on 6/11/2018 by InyoPools Product Specialist Hector F.

The replacement motor would be the B661

?     Asked on 5/31/2018 by Andy

I have a WhisperFlo WFE-24 1HP S/N 1-19-L02. Is this the correct replacement motor. Thanks.

A     Answered on 5/31/2018 by InyoPools Product Specialist Hector F.

No, the actual correct replacement motor would be part number B863SE

?     Asked on 5/29/2018 by Paul

Trying to replace my Pentair Superflo 1HP -Model # 340038. Not sure if I just need the actual motor-Model#196238 or the entire unit-model# 340038? When I turn the pump on it sounds like its trying to click on, but ultimately does not power up. Any help? thanks so much

A     Answered on 5/29/2018 by InyoPools Product Specialist Lennox H.

Hi, Paul. You can check the motor's capacitor, or if the motor shaft is seized.  You can also replace the Motor and the seals, you options will be Part # 355020S, PL2853, or B2853 and the Superflo Tune Up Kit - GOKIT78

?     Asked on 5/23/2018 by

I am trying to replace Pentair motor model# 177474 - would this one work?

A     Answered on 5/23/2018 by InyoPools Product Specialist Patrick P.

Hi, We would actually suggest the B853 1 HP Up-Rate Motor as the proper replacement for your motor model 177474

?     Asked on 5/8/2018 by carol

what is the amp usage on this 075234S?

A     Answered on 5/8/2018 by InyoPools Product Specialist Hector F.

The amperage for this motor ranged from approximately 7.8 - 16. 

?     Asked on 8/2/2017 by

will this fit the pentair motor 340038 also says 196238?

A     Answered on 8/2/2017 by InyoPools Product Specialist Lennox H.

Hi. This motor will fit the model # 340038 but has a higher total hp. The correct replacement motor would be Part # 075233S along with GOKIT78

?     Asked on 5/22/2017 by

what is the space between the 4 bolts that mount the motor to the pump?

A     Answered on 5/27/2017 by InyoPools Product Specialist Stacey M.

Hello, Are you talking about the motor mounting plate? Here is a pump breakdown from a Pentair / Purex Whisperflo.

?     Asked on 8/1/2016 by Richard Raaflaub

I have a Pentair 1 HP/ 1.25 SF motor. Part # SF-N1-1A/340038 230/115V 60 HZ 3450 RPM Looking for replacement. I was told there is this motor and also a more efficient motor (That costs more)that will save me electricity.???

A     Answered on 8/4/2016 by InyoPools Product Specialist Lennox H.

Hi Richard, The UQC1102 or B661 are your options for a more energy efficient single speed motor. The replacement seals for your pump can all be located via the Pentair Superflo Parts page.

?     Asked on 7/16/2016 by Superman pool

I'm so sorry, I failed to notice my previous question had been asked and answered. Do you currently have this motor in Stock or attainable? Thank you.

A     Answered on 7/18/2016 by InyoPools Product Specialist Alan M.

This motor would be a direct ship from the manufacturer and could take 7-10 business days or longer.

?     Asked on 7/16/2016 by Superman pool

Is this new or refurbished?

A     Answered on 7/16/2016 by InyoPools Product Specialist Lennox H.

Hi, This motor is new not refurbished.

?     Asked on 7/9/2016 by Bobbye

i have a Pinnacle 1 1/2hp , 230/115, 40 AMP, 3450 RPM, continuous pool pump, part 7-177475-20. Serial #0309225070047M. P/N 342352(discontinued). The bearings are going. When i look at replacement motors, i am using the information located directly on the pump, i am given a replacement motor of only 1hp. It is a Pentair and looks the same as what i have, but i need 1.5hp. Why am i not getting matches for a 1.5hp ?

A     Answered on 7/15/2016 by InyoPools Product Specialist Lennox H.

Hi Bobbye, You can use this 1 HP Full Rate OEM Motor (075234S) which has a total hp of 1.65 because of the service factor which is 1.65 or the B854 which is an UP Rate motor which also has a total hp of 1.65 but has a service factor of 1.10. The OEM 1.5 HP motor is p/n 355024S. Whichever motor you decide to go with I will also recommend getting the Pentair/Pac-Fab Pinnacle Tune Up Kit (GOKIT24).

?     Asked on 6/26/2016 by David

I have a SuperFlo pump. The motor I removed is 1.0 HP and 1.25 S.F. HP. The motor # is 196238. Is this the correct replacement? Thanks.

A     Answered on 6/26/2016 by InyoPools Product Specialist Matt S.

The correct motor is going to be a A.O. Smith 1 HP, 56Y Frame, Up-Rate Motor (B2853).

?     Asked on 6/14/2016 by Jay

I have a Pentair WhisperFlo WFE-8 (almond) with a motor that is AO Smith Century Centurions 2hp, 1.30 SF, part 7-177452-03, type CX, ph 1, volts 208-230, hz 60, rpm 3450. It is for my in-ground spa jets. I need to replace motor and would like to get the original model by pentair again (don't think this AO Smith is original). Can you tell me two options: (1) the original pentair motor to buy, (2) the exact replacement for this AO Smith current motor that is on the pump as shown above? Thanks.

A     Answered on 6/14/2016 by InyoPools Product Specialist Patrick P.

Hi Jay, here is the exact WFE-8 Replacement Motor from Pentair for your pump, please note this is a 2.5 HP Up Rate Motor which is identical to your 2 HP Full Rate motor. A.O. Smith does make the motors for Pentair so here is 2 HP Full Rate B2843 AO Smith Replacement Motor which is the exact same as the Pentair motor with the exception of the color, the Pentair is Almond and the aftermarket AO Smith motor is black.

?     Asked on 6/4/2016 by leonardo fehlerg

I have a whisperflo WF-28 011774 almond with a 2 HP motor. It's over designed for my 10,000 gal pool. I want to take the opportunity that the motor burnt and bring down to 1HP motor. is it a direct replacement? thanks.

A     Answered on 6/4/2016 by InyoPools Product Specialist Patrick P.

He Leonardo, For your WF-28 you would actually need the  1 HP Replacement Motor you will also need to replace your 2 HP Impeller with this 1 HP Impeller otherwise you will burn up the 1 HP motor very quickly, finally you will also need a Pentair 1 HP Tune Up Kit. We have a Video on How to Replace a Pool Pump Motor you may find helpful.

?     Asked on 5/28/2016 by Khoa Phan

I have a Pentair part 7-177450-03 what is the replacement for this item. Thanks

A     Answered on 5/28/2016 by InyoPools Product Specialist Alex V.

Khoa, Can you please confirm the amps and S.F on your motor label?

?     Asked on 5/17/2016 by Jacqueline D Rice

I have a Pentair Model # 177475 HP 1.50, SF HP 1.65 Pump Motor 13095.(Almond) What is the replacement item for this?

A     Answered on 5/17/2016 by InyoPools Product Specialist Matt S.

Yes the 075234S is the correct motor replacement for your Pentair Part # 177475 (Color: Almond.) Make sure you pick up the correct shaft seal to complete the motor replacement.

?     Asked on 5/9/2016 by Bill

I have a Pentair model WFE-2 Part #011511or motor #177449 -1/2 HP . What do I need to replace this motor?

A     Answered on 5/10/2016 by InyoPools Product Specialist Hector F.

The replacement motor is model B661. We also recommend replacing the seal kit. That would be gokit32 for a chlorine pool and gokit32salt for a salt pool.

?     Asked on 4/5/2016 by Kardel

Hi; Are these pump new ones or they have been refurbish either all or part of them? Thanks! K. B

A     Answered on 4/5/2016 by InyoPools Product Specialist Hector F.

These motors are brand new but are not currently in stock. These are special order from the manufacturer.


Review Summary

  (Average 5 out of 5 stars)
1 Ratings
5 star:
4 star:
3 star:
2 star:
1 star: