Model # PLM100JWAE03
Alternate Part #'s PLM100OE1160
Sta-Rite® has combined the powerful filtering capabilities of a cartridge filter with the low-maintenance of a sand filter. Specially designed Mod Media™ cartridges will filter particles 3 times smaller than sand and require only a simple cleaning about 2 times per season. Now you can have the low maintenance of sand with the outstanding water clarity of a cartridge filter.
This system comes with a high-tech tank that is compact and built of tough Dura-Glas® composite to withstand weather and corrosion. It is backed by a 1-year warranty. The tank is also designed around easy access with its easy-open “posi” ring closure that allows rinse-in-place cleaning of the Mod Media™ cartridges. You can wash and rinse your Mod Media™ cartridges without even removing them!
The Mod Media™’s filter is specially designed to handle 15 times more dirt than an equivalent sand or cartridge filter. It can handle so much dirt and continue to operate efficiently, that you will only have to rinse the cartridges once or twice per season. Plus, Mod Media™ cartridges last for many seasons, eliminating the hassle of replacing sand every other year.
Driven by our powerful and efficient Sta-Rite® pumps, the system produces optimal turnover rates. In fact, the system is so efficient you can run it less, saving you money on energy costs. The system comes complete with pump, filter, base, and hose connections. Invest in the premium Mod Media™ system this season for unsurpassed water quality and low, low maintenance.
I have this system and my motor burned up. Is it possible to purchase the motor system without the cartridge filter?
Hi Janet, Yes you could purchase the entire pump or just the motor which goes onto the pump. Most of the time customer's would just purchase the motor. If you have a 1 HP, 115V, 3450 RPM motor then you would require this 1 HP Sta Rite JWPA Replacement Motor and you would also require this Sta-Rite JWPA Shaft Seal. We have a good video here which will show you How to Replace a Pool Pump Motor this video should make the job relatively easy.
1 to 2 hrs
I assembled the new Sta-rite pump/filter and got it ready to go. Directions were clear so it was easy to put together.It came with everything but shut off valves so I ordered those separately and installed those as well. I blocked the water inlet and outlet hoses. Then I disconnected the old pump/filter and replaced it with the new Sta-Rite pump/filter. tightened the hoses and unblocked the inlet and outlet hoses. I opened the valves and filled the tank then turned the pump on. It works beautifully!