I have an AO Smith model B127 3/4 HP super pump motor and am looking to replace it because the bearings are going out and it's inefficient. I added solar heating panels and a salt generator 2 yrs ago and am thinking I should increase the HP. What would you recommend? Thank You
Reply
I'll need to know what model filter you have to know if it would be able to handle the increased flow rate of a higher horsepower motor. If you are needing more horsepower for your solar panels, then you would want to start there. Would hate to have you get a bigger motor and blow your filter out because it can't handle the flow rate. If you don't know what the model of your filter is, you can attach some pictures of the filter and I'll be able to identify it that way.
Reply
My current 3/4 hp motor is connected to a gear box to reduce the speed and drive a pool cover takeup. This is the second time this motor has failed due to the potted electronics package which reverses the rotation. Can I pull the run capacitor out of a new motor and use my own reversing relay? I'm a EE with 5 years in motor control design.
Reply
Good morning Townsend, It is possible but I would talk to someone with A.O smith. 1-800-262-6484. Let us know how it works out. Your question and design could possibly be beneficial to future motor designs and products.
Reply
Will this motor work as a replacement for a A. O. Smith Part 7-193631-24 Type CX FRS56J motor on my JHP 475 Jandy Pump?
Reply
I have a .75hp AOSmith UST 1072 motor and bot a Century UCT 1072. Besides the energy efficiency difference of the motors, what is the difference between a Century and AOSmith motor. The new motor looks reconditioned on the face of the plate where the shaft comes through.
Reply
Hi, A.O. Smith is now Century so there is no difference between the two motors.
Reply
will this motor work as a replacement for an A.O.Smith model K48K2N104 SER 8C05
Reply
Hello Ed- The A.O. Smith 1 HP Energy Efficient Round Flange Up Rate Motor - UCT1102 is the correct replacement for your k48k2n104 motor.
Reply
What makes this motor 33% more efficient than a standard one?
Reply
These energy efficient single speed motors draw less amperage than the standard motors hence potentially saving up to 33 percent in electrical costs.
Reply
I have a Hayward super pump model sp2605x7. It currently has an Emerson k53cxepw-4765 3/4 hp motor that has seized up. It has a Hayward sand filter model s220t. My pool is 26,000 gallons. Is this a suitable replacement?
Reply
Yes Jeremy the A.O. Smith 3/4 HP Round Flange 56J Up Rate EE Motor - UCT1072 could work as a replacement for your Emerson k53cxepw-4765 3/4 hp motor that is paired with your super pump model sp2605x7.
Reply
Will this pump motor fit on a SP1605-z-1-MBK. Part no currently is a 8-177018-24
Reply
Hello, This will be the correct motor for your pump.http://www.inyopools.com/Products/00200017001330.htm
Reply
Is this a self priming pump? My original says self priming on it. I have a C48J2N131B1
Reply
Hello,This will be the correct motor you will need for your pump.http://www.inyopools.com/Products/00200017001330.htm?Keywords=C48J2N131B1The motors will not be self-priming. That would be the pump portion.
Reply
Will this motor replace a Hayward sp3010x15az super 2 pump 1.5? Thanks
Reply
I just replaced the shaft seal on my motor thinking (hoping) that was causing the awful noise the motor has been making recently. Unfortunately, that was not it (I guess it was the bearings). I'm not interested in going down the bearing replacement route, so will just buy this motor.
Having just now replaced the seal, do I have to buy a new seal (again) for this one?
Reply
Hi. Yes, I will recommend replacing the shaft seal again.
Reply
I have an electric motor model # C48J2N131B1. Does this motor replace it? Thanks in advance for your help.
Reply
Hi Carl, yes this is the correct replacement motor for your motor model C48J2N131B1. When replacing a pool motor we do suggest a Seal Kit. Could you send us a few photos of your pump so we can suggest the proper seal kit? If so then please take a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation for your seal kit.
Reply
Will the UCT 1072 3/4 horse work with a Hydramax II and how long to get that to Albuquerque NM Express? Thanks, Bruce
Reply
Hi Bruce, could you send us a few photos of your pump and motor? Please take a close up shot of the motor label as well as a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
Reply
Hi, I need to replace my pump (UCT1072) that I purchased from you years ago. I'd like to keep it with the same compatibility but wanted to know if there is one that is more efficient?
I'm looking to just swap it out, not get too complex with the variable speed.
thanks
Reply
Hi Joseph, yes this is the most energy-efficient single speed for the UCT1072 motor. When replacing a pool motor we do suggest a Seal Kit. Could you send us a few photos of your pump so we can suggest the proper seal kit? If so then please take a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos or quickest using our live online chat feature. Once we get those photos we can make the proper recommendation for your seal kit.
Reply
