Part # UCT1072
Warranty 1 Year
Alternate Part #'s K48A71A04, K48J2N100A2, UCT1072
Replace your Pump Motor with an Energy Efficient model UCT1072. Our Energy Efficient UCT1072 replacement motor cost roughly 33% less to operate than the standard UST1072 replacement motor. In most states you will recoup the cost difference between the standard motor and Energy Efficient Motor within 4-6 months.
Voltage 115/230, Max Amps 115V = 8.0 230V = 4.0, Single Speed, Round Flange, RPM = 3450, Threaded Shaft, Frame = 56J
Used on the following models: Hayward Max Flow, Hayward Super Pump, Hayward Super II, Hayward Northstar and Jacuzzi Magnum pumps.
What makes this motor 33% more efficient than a standard one?
Reply
These energy efficient single speed motors draw less amperage than the standard motors hence potentially saving up to 33 percent in electrical costs.
Reply
will this motor work as a replacement for an A.O.Smith model K48K2N104 SER 8C05
Reply
Hello Ed- The A.O. Smith 1 HP Energy Efficient Round Flange Up Rate Motor - UCT1102 is the correct replacement for your k48k2n104 motor.
Reply
I have a .75hp AOSmith UST 1072 motor and bot a Century UCT 1072. Besides the energy efficiency difference of the motors, what is the difference between a Century and AOSmith motor. The new motor looks reconditioned on the face of the plate where the shaft comes through.
Reply
Hi, A.O. Smith is now Century so there is no difference between the two motors.
Reply
Will this motor work as a replacement for a A. O. Smith Part 7-193631-24 Type CX FRS56J motor on my JHP 475 Jandy Pump?
Reply
My current 3/4 hp motor is connected to a gear box to reduce the speed and drive a pool cover takeup. This is the second time this motor has failed due to the potted electronics package which reverses the rotation. Can I pull the run capacitor out of a new motor and use my own reversing relay? I'm a EE with 5 years in motor control design.
Reply
Good morning Townsend, It is possible but I would talk to someone with A.O smith. 1-800-262-6484. Let us know how it works out. Your question and design could possibly be beneficial to future motor designs and products.
Reply
I have an AO Smith model B127 3/4 HP super pump motor and am looking to replace it because the bearings are going out and it's inefficient. I added solar heating panels and a salt generator 2 yrs ago and am thinking I should increase the HP. What would you recommend? Thank You
Reply
I'll need to know what model filter you have to know if it would be able to handle the increased flow rate of a higher horsepower motor. If you are needing more horsepower for your solar panels, then you would want to start there. Would hate to have you get a bigger motor and blow your filter out because it can't handle the flow rate. If you don't know what the model of your filter is, you can attach some pictures of the filter and I'll be able to identify it that way.
Reply
I'm trying to replace the motor on my pool pump but all these numbers and abbreviations on the motor label are really confusing me. What do they mean?
Reply
Replacing a pool pump motor is not as difficult as it seems. You can try looking here. If you need help figuring out what the information on your label means. If you are still having difficulty figuring it out you can call us at our toll free number or you can send us a photo of your motor label here.
Reply
I'm trying to find a replacement motor for my pool pump but my model number doesn't match what you have listed as the model number. My model number begins with a C48 and yours begins with an SP. Please help.
Reply
What we have listed on our chart pages is the pump model number. The model number you have will just identify the motor. If you look on the plastic housing on the pump there should be a sticker which will have the pump model number. You can usually find this by the discharge port on the pump. Once you locate it you can choose the correct replacement motor. Be certain to change the shaft seal and gaskets as needed. You can use our >How to guide if you need help.
Reply
Why should I purchase a Tune Up Kit?
Reply
A Tune Up Kit includes all of the essential replacement seals and gaskets for the pump. The seals and gaskets should be replaced when installing a new motor on your pump. New seals will prevent the pump from leaking water or losing the prime. A Tune Up Kit will protect your motor and ensure that the pump is working efficiently.
Reply
Why do I need to purchase a new shaft seal?
Reply
We strongly recommend replacing the shaft seal. The purpose of a shaft seal is to prevent water from running down the shaft of the motor and into the motor housing. Water will damage the bearings and cause the motor to fail. A new shaft seal should be installed whenever a motor is replaced. The motor manufacturer can deny the warranty if the motor fails to due to water damage from a faulty shaft seal. To find your shaft seal you will need to visit our Pool Pump Parts Page or the Spa Pump Parts Page and select your make and model.
Reply
What is Service Factor?
Reply
Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
Reply
The Most Helpful Review
4 0
(5 out of 5 stars) fast delivery and excellent service
Reviewed By: Haitao W. from Weston, FL ()
Pros: quick delivery, and excellent customer service
I order this on line and it took only 2 business days to be delivered to my home. I replaced the old motor and replaced with the new one. When I turned on the power, the motor runs about 5 seconds and stopped. The next day, I called the customer service and described what happened to the motor. The lady over the phone told me it sounds like the voltage issue and asked me to check the jumper on the motor. And she also forward me the step to return the motor if it really is a motor problem. After I am back to home, I checked the voltage and the jumper again. And yes, the issue is exactly the voltage issue. After I fixed that, the motor works perfectly. Now, I am really happy with the product and its customer service.
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars) Easy install and money saver
Reviewed By: ()
Easy install, running quietly, and saving money!
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: ()
Super easy to change and about a third quieter too. Just make sure to check the voltage knob when you're wiring it up, it'll run on 115v or 230v put it on the correct voltage you're running
Was this review helpful to you?
0 2
(3 out of 5 stars) motor
Reviewed By: Gay G. ()
we thought this was going to fix the problem. thankfully it was easy to install. now we are on to the next problem.
Was this review helpful to you?
2 0
(5 out of 5 stars)
Reviewed By: Troy T. from Forest Hill, MD ()
The new motor is a lot better than old .All electrical conections were the same.This one is lot quieter than the old one.
Was this review helpful to you?
(5 out of 5 stars) good replacement motor for hayward super pump
Reviewed By: Chet W. from Lexington, MA ()
The order arrived sooner than stated. The motor was easy to install, and runs quietly. I opted to buy the gasket kit from the local pool store, but in hindsight would have ordered it with the motor. It is cheaper that way and when you've got the pump apart, it's a good time to replace all of the seals and gaskets.
Was this review helpful to you?
(5 out of 5 stars) Quiet AND efficient.
Reviewed By: Steven R. from Catskill, NY ()
Pros: Quiet, efficient, powerful
Runs great! In addition to the low electricity usage, it's MUCH quieter than the original motor was. I don't have a flow gauge on my system, but it appears to move a bit more water than the original motor did.
Was this review helpful to you?
2 0
(5 out of 5 stars) Great replacement pump, good price!
Reviewed By: John M. from Essex Junction, VT ()
Pros: Easy to install, quiet operation
Cons: None
I purchased this pump for my Hayward Super Pump and the online instructions made it easy to replace my old pump with this one. Went with the energy efficient pump and hopefully will see the benefit in my electric bill. So far so good with this pump. Would recommend this to anyone looking to replace a pump motor.
Was this review helpful to you?