My impeller (SP1605-C) broke. I noticed that you have a conversion kit (Part Number 5110-52) that will convert an SP1600X to an SP2607-C. The kit list includes 5 items (5110-10CA, 5110-09A, 5110-08A, 5110-12, and a 5110-13C) but does not include a Shaft Seal (Part Number 5110-11). Do I need to buy 5110-11 separately?
Reply
Yes you will need to purchase the seal separately.
Reply
So, this is the correct kit for my SP1607Z1M/C48K2N143B1 pump?
Reply
Hi Christina, please take a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation for your seal kit.
Reply
I have a Hayward SP1600 system . Will kit 5110-52 and Century motor UST1072 match with the rest of my pump system?
Reply
Hi Wayne, could you send us a few photos of your pump and motor? Please take a close up shot of the motor label as well as a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
Reply
Does this kit have the seal for salt water?
Ruby
Reply
This kit includes the standard shaft seal. The salt seal/heavy-duty seal is part number 5250-235.
Reply
Does this kit work with the C48K2N143C1C A.O. Smith pump?
Reply
Hello Peter. The Generic Super Pump Style Drive Train UPGrade Kit 1 HP part #5110-52 is compatible with the A. O. Smith Motor model C48K2N143C1C. Please note that this UpGrade Kit is only compatible with the Hayward Pool Products Super Pump. Attached please find an exploded parts diagram for the Hayward Super Pump for reference. Hayward Super Pump
Reply
Will this kit work with my new 1HP Hayward motor SPX 1607z1M I just purchased ?
Reply
Hello Shawn, yes this kit would be compatible with your motor as long as you have a Hayward Super Pump series pool pump. Please click here to view an image of a Hayward Super Pump to better confirm.
Reply
Hi, my parts say 2600 on them- to this kit would work, yes?
Reply
Hello Alexander. The Generic Super Pump Style Drive Train Upgrade Kit 1 HP - 5110-52 is compatible with the Hayward Super Pump 1600 Series. Attached please find the Hayward Super Pump Parts diagram. For additional verification, please visually compare the Super Pump square pump housing (part #7) on the diagram to your pump housing. The parts diagram provides additional verification options by comparing your pump's part numbers to those indicated on the diagram. This is specifically true for the Strainer Cover/Pump Lid Cover (part #3) where the Hayward part number is located on the lid's underside between the 2 hinge points.
Reply
