Part # 5110-52
Alternate Part #'s SPX2607CKIT, 35-150-2050, HAYSPX2607CKIT
Generic Super Pump™ Style Drive Train UpGrade Kit 1 HP
This is an after-market generic Drive Train Upgrade Kit that works on the 1 HP Hayward Super Pump. These are aftermarket generic parts and are not the Hayward Original Parts.
For pumps with an "SP1600X-" part number (manufactured before 1983), the use of these Drive Train Upgrade Kit will upgrade the old pump to the current "SP2600X-" series. This will improve GPM, reduce noise, and provide slightly better energy efficiencies.
KIT INCLUDES:
(1) IMPELLER SP2607-C INYO# 5110-10CA
(1) DIFFUSER SP2600-B INYO# 5110-09A
(1) GASKET, DIFFUSER SPX1600R INYO# 5110-08
(1) GASKET, HOUSING SPX1600T INYO# 5110-12
(1) SEAL PLATE SP2600-E INYO# 5110-13C
(1) MOTOR MOUNTING PLATE
(1) SHAFT SEAL
Does this kit work with the C48K2N143C1C A.O. Smith pump?
Reply
Hello Peter. The Generic Super Pump Style Drive Train UPGrade Kit 1 HP part #5110-52 is compatible with the A. O. Smith Motor model C48K2N143C1C. Please note that this UpGrade Kit is only compatible with the Hayward Pool Products Super Pump. Attached please find an exploded parts diagram for the Hayward Super Pump for reference. Hayward Super Pump
Reply
Does this kit have the seal for salt water?
Ruby
Reply
This kit includes the standard shaft seal. The salt seal/heavy-duty seal is part number 5250-235.
Reply
I have a Hayward SP1600 system . Will kit 5110-52 and Century motor UST1072 match with the rest of my pump system?
Reply
Hi Wayne, could you send us a few photos of your pump and motor? Please take a close up shot of the motor label as well as a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
Reply
So, this is the correct kit for my SP1607Z1M/C48K2N143B1 pump?
Reply
Hi Christina, please take a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation for your seal kit.
Reply
My impeller (SP1605-C) broke. I noticed that you have a conversion kit (Part Number 5110-52) that will convert an SP1600X to an SP2607-C. The kit list includes 5 items (5110-10CA, 5110-09A, 5110-08A, 5110-12, and a 5110-13C) but does not include a Shaft Seal (Part Number 5110-11). Do I need to buy 5110-11 separately?
Reply
Yes you will need to purchase the seal separately.
Reply