Will this motor work for a Hayward pump SP2602X10 ID21120612001397020 ?
Reply
will this motor mount to an above ground pool pump?? It looks identical to the one i have. My pump is a Hayward. It has 4 thin bolts that goes thru and fastens to the pump.
Reply
Perry, This motor will only fit on certain above ground pool pumps since it does not have a base.
Reply
can this pump replace dynamo model#193262
Reply
Hi, This motor is no longer available but could have been used, you will need the BN25 motor along with the Dynamo Tune Up Kit (GOKIT46).
Reply
will this pump work on a magnum force pump? the current motor specs are as follows. Emerson 1HP, SF 1.4 volts 208-230/115 hz 60, rpm 3450, PH 1, Frame 56J, ROT CCW drive end, shaft 7/16-20 thread.
Reply
Hi Jerry, This motor will not work as a replacement, you need the Century B128 Motor along with the Jacuzzi Magnum Tune Up Kit (GOKIT14).
Reply
HOW DOES THE WARRANTY WORK . AND FOR HOW LONG
Reply
That motor is a Pureline product which is INYO's brand so the 1 year warranty with go through INYO if anything were to happen in the first year.
Reply
WILL THIS MOTER WORK ON A RELIANT PUMP MOTOR MODEL NUMBER 72743
Reply
Hi Donald, yes this motor is compatible with the pump model 72743. You also may need a generic shaft seal PSR200.
Reply
Can i use this as a replacement on a Hayward Super Pump?
Reply
No this should not be used on the Hayward Super Pump. Here is a link to the appropriate replacement motors for your Super Pump. Make sure you use the correct HP...Hayward Super Pump Motors
Reply
