Part # 4811-101
Manufacturer Code DEX2422Z2
Dimensions 19-13/16"ID, 20-11/16"OD
Alternate Part #'s DEX2422Z2, 14-150-1360, HPPDEX2422Z2
INYO #4811-101 HAYWARD #DEX2422Z2.
THIS IS THE METAL REINFORCED BODY GASKET USED IN THE HAYWARD PRO-GRID FILTER.
THIS IS A SOMEWHAT SQUARE GASKET WITH A METAL REINFORCEMENT WHICH KEEPS IT IN THE PROPER ROUND SHAPE
DO NOT LUBRICATE THIS SEAL.
****************************************************
DIMENSIONS: OUTSIDE DIAMETER: 20-5/8" INSIDE DIAMETER: 19-7/8" TOP TO BOTTOM: 1/2"
Used on the following models:
Hello, We have a Hayward swimclear cartridge filter from the late 1990's and need a replacement O ring. Is this the right O ring? Thanks so much!
Reply
Hello, yes this seal is compatible with your Hayward Swim Clear series cartridge filter. I have also emailed you an estimate that you can convert to an order if you would like. Item is currently in stock and ready to ship.
Reply
Hello, I have the Hayward Model #: C6060BHMB
I need to replace the large O ring that sits in between the two halves. I'll attach a picture.
Thank you for the help!
Hello Michael. The Tank Lid Metal Reinforced O-ring - DEX2422Z2 is compatible with the Hayward/Blue Haven Cartridge Filter C6060BHMB. Attached please find the Hayward SwimClear exploded parts diagram for reference.
Reply
I have a C7020 filter tank. I saw a reply said this metal reinforced Oring doesn’t need lubricant but on my top tank there is a sticker says use lubricant. Does it mean I can use a normal rubber o ring instead of metal reinforced? Thanks
Hello Christian. The Hayward Reinforced O-ring is compatible with the Hayward DEX2421JKIT - clamp, clamp nut & bolt assembly. The previous stainless steel clamp style for the Hayward SwimClear required the tank lid o-ring DEX2400K. Based on the photo provided, the DEX2400K is the correct o-ring for the pictured clamp style. A light application of lubricant is recommended on this o-ring by Hayward. Please note step 20 on the attached SwimClear Owner's Manual
Reply
I have a Hayward DE 4820 filter and need the gasket which goes between the top and bottom halves.
Reply
I have a DE3620 Hayward pool filter, will this be the same as the OEM seal. I ordered one thru Amazon and it was ok as far as the diameter but the height was smaller.
Reply
Hi Ron, Yes this will be the same as the OEM seal and this one is made by Hayward and is reinforced with metal,
Reply
