1 H.P. In Ground Pool Pump 2" - 72747


Model # 72747

  4 Average  



Model # 72747

Product Description

SF Pro Series is a self-priming pump. It provides ultra-performance with a larger impeller and heavy-duty motor. The SF Pro Series is suitable for in ground swimming pools, medium and large size above ground pools.


  • Self-priming (suction lift up to 8’ above the water level)
  • Pump is designed with high flow rate for faster turnover.
  • All components are made of corrosion resistant materials for extra durability and long life.
  • Impeller is made of high strength engineering grade plastic for extra durability.
  • Mechanical seals are engineered for long life and quiet operation.
  • Poles of asynchronous motor and varnished stator are designed and engineered to provide long life.
  • Motor is equipped with thermal protection to prevent overheating, increase safety, and to improve reliability.
  • Waterproof grade: IPX5, 100% drip proof.
  • All electrical insulation for motor wires is F grade.
  • Transparent strainer lid can be removed easily for inspecting and cleaning.
  • Drain plug for easy pump winterization and maintenance.
  • All pumps are designed and manufactured to meet all CSA and ETL agency requirements.
  • Includes PVC unions for easy installation and servicing.

Product Specifications

1 HP
Port Size:
2 in.

?     Asked on 5/21/2019 by doug

I would like to see a schematic wiring diagram to hook up to a115v outlet

A  Answered on 10/14/2019 by InyoPools Product Specialist Steve M.

Doug, we apologize for the inconvenience, however, we were unable to obtain this schematic from the manufacturer.

?     Asked on 5/5/2016 by slatter

desperately need a transparent strainer top and seal for reliant72748 or 72747 regards slatter

A  Answered on 5/5/2016 by InyoPools Product Specialist Andy O.

Slatter- The strainer lid for the 72747 1 H.P. In Ground Pool Pump 2" is going to be part number PO12728CR Pool Pump Cover.

?     Asked on 10/26/2015 by charles mann

will this pump replace a Pentair challenger pump?

A  Answered on 10/26/2015 by InyoPools Product Specialist Hector F.

These pumps are a generic replacement to many other pump manufacturers including Pentair.

?     Asked on 6/21/2015 by peter sisco

is this pump a good replacement/upgrade from a Sta-Rite Max-E-Glas - Dura-Glas Up-Rated pool pump ? We havea 16000 gal inground pool and ourpump recently went so I want to replace it but would like to make the replacement a budget friendly upgrade.

A  Answered on 6/21/2015 by InyoPools Product Specialist Hector F.

If you have used a model manufactured by Sta Rite then I would recommend staying with well known manufacturers versus generic models such as this.

?     Asked on 2/23/2015 by DT Fortunato

Is this a good replacement for a 1hp Jacuzzi magnum pump

A  Answered on 2/23/2015 by InyoPools Product Specialist Hector F.

I would say that this is a fair replacement pump to the Jacuzzi Magnum.

?     Asked on 9/10/2014 by Guest

Is this an adequate replacement for 1HP Hayward Super Pump?

A  Answered on 9/10/2014 by InyoPools Product Specialist Patrick P.

Both pumps are 1HP rated. The only issue will be that the BC2747 has 2" ports. The Hayward pump has 1.5" ports. You will need reducers to plumb in the BC2747.


Review Summary

 (Average 4  out of 5 stars)
1 Ratings
5 star:
4 star:
3 star:
2 star:
1 star: