1 1/2 HP 2 Speed 115V Motor for JWP Pump - Clearance - 620032032

THIS PRODUCT IS NO LONGER AVAILABLE

Model # 620032032

By Pentair Pool Products


Details

Top

Model # 620032032

Product Description

This is the replacement motor used on the Sta Rite and Pentair JWP & JWPA series above ground pool pumps.

**Note: Use the A.O. Smith 1.5 HP Thru-Bolt 48Y Dual Speed Motor - BN50V1 as a replacement.**

Product Specifications

HP:
1.5 HP
Amps:
16.0/3.6 amp
Volts:
115 V
Frame:
Round
Service Factor:
1.0
RPM:
3450/1725 RPM
Speed:
Dual
Top

?     Asked on 6/23/2019 by Clive Oliver Lawrence

I have a STA-RITE System 2 Filtration filter with Model JWPA5E7L-2AC, with A.O Smith motor S48B74A03. My motor is shot and I need to replace it. Is the motor model still available, and if not what is the approximate replacement ??

 Reply

A  Answered on 6/23/2019 by InyoPools Product Specialist Lennox H.

Hi, Clive. The entire pump is no longer available, however, replacement parts including a suitable motor are available. Use the Sta-Rite JWPA Series Pump Parts Diagram page.
 Reply

  • Commented on 6/24/2019 by Product Owner

    Thank you for the info and you quick response.
     Reply


?     Asked on 7/12/2017 by Dale

I have a sta-rite PLM-100 filter with a JWPA5YF7L-A1 pump, motor model C48M2A24B1, 1-1/2hp 2 speed 115v. the motor makes some noise while on low speed and the motor casing gets very warm, thinking the bearings are going along with maybe the windings. Do you have a replacement 2 speed motor that will mount to the pump/filter.
 Reply

A  Answered on 7/13/2017 by InyoPools Product Specialist Patrick P.

Hi Dale, you will require the BN50 1.5 HP Dual Speed Replacement Motor 115V you will also need a JWPA Seal Kit when you replace your motor.
 Reply


?     Asked on 7/12/2017 by Tim

I have model PLM150 with one horse-power and need to replace the pump motor. Can I upgrade to 1.5 horse-power without blowing out my filter? It is a 27-foot above ground pool. Thanks
 Reply

A  Answered on 7/12/2017 by InyoPools Product Specialist Patrick P.

Hi Tim, You could upgrade to 1.5 HP but you will need the following items assuming you have a Sta-Rite JWPA pump. The items required to upgrade to 1.5 HP are as follows: 1.5 HP Replacement Pump Motor, 1.5 HP Impeller and JWPA Seal Kit.
 Reply


?     Asked on 6/17/2017 by Steven

I have the JWPA5YFL-A2 motor. I wanna just replace the motor Which is the one i need?
 Reply

A  Answered on 6/25/2017 by InyoPools Product Specialist Lennox H.

Hi, Steven. The Century BN50 Motor can be used as a replacement for this motor.
 Reply


?     Asked on 5/27/2017 by Scanlon

Does this replace Starite JWPS5F7L-2A2 1.5HP motor #S48B74A03?
 Reply

A  Answered on 5/27/2017 by InyoPools Product Specialist Patrick P.

Hi Scanlon, You would require this BN25 Replacement Motor as a replacement to the S48B74A03 motor. You will also need a JWPA Shaft Seal
 Reply


?     Asked on 5/15/2017 by

I have an S48B74A03 and I need a replacement motor and shaft seal.
 Reply

A  Answered on 5/15/2017 by InyoPools Product Specialist Hector F.

Your replacement motor is part number BN25. In order to cross reference the correct shaft seal that you will need we will need the model name or number of the front pump housing that the motor bolts to. If you do not know that information please send images of that housing through our support request page.
 Reply


?     Asked on 10/9/2016 by Tom

I have a JWPA5F7L-2A2 motor. Which replacement motor is right for me?
 Reply

A  Answered on 10/12/2016 by InyoPools Product Specialist Lennox H.

Hi Tom, The BN35V1 is the correct replacement motor based on the model number provided.
 Reply


?     Asked on 8/28/2016 by Jeff

I have a motor model K48M2 PA105 ser 1cw. 230 volts 1 1/2 hp can I use this two speed motor with a pump mdl P4EGF-1881
 Reply

A  Answered on 9/1/2016 by InyoPools Product Specialist Scott W.

If you are wanting a replacement motor that is 115V part number BN50 would be the one you want. If you are wanting one that is 230V part number BN34 would be the one for you.
 Reply


?     Asked on 7/14/2016 by Christine

I have a JWPAS5F-2A4 Sta-Rite Motor for my above ground pool ... it just started making a squealing noise and my husbands thinks the bearings are going bad. What do I order?
 Reply

A  Answered on 7/17/2016 by InyoPools Product Specialist Lennox H.

Hi Christine, We do not have the replacement bearings for that style motor you will have to replace the entire motor. You can use the BN35V1 or BN50 motors as replacements.
 Reply


?     Asked on 7/13/2016 by

I have a JWPA5FL-2A1. What will replace it?
 Reply

A  Answered on 7/17/2016 by InyoPools Product Specialist Lennox H.

Hi, The Sta-Rite Dynamo 1.5 HP Pump - 351230SR will replace the JWPA5FL-2A1 pump that you currently have or the BN35V1 motor will replace your existing motor if the pump housing in okay.
 Reply


?     Asked on 6/10/2016 by martin egan

i have a JWPS5F7L-2A2 1.5 HP PUMP THE MOTOR IS SHOT S48B74A03 WITH A CORD DO THEY HAVE A REPLACEMENT MOTOR
 Reply

A  Answered on 6/22/2016 by InyoPools Product Specialist Lennox H.

Hi Martin, Base off of the motor # S48B74A03 the BN25SS is the correct replacement motor.
 Reply


?     Asked on 3/14/2016 by Steven

I have the JWPA5YFL-A2 motor. So can you point me in the right direction to replacing this system. But not cost me an arm and leg.
 Reply

A  Answered on 3/15/2016 by InyoPools Product Specialist Lennox H.

Hi Steven, The Dynamo Pump 1-1/2 HP 2 Spd. (no cord) would be a suitable replacement pump.
 Reply


?     Asked on 3/12/2016 by Steven

I have a Sta Rite JWPA5YFL-A2 2 speed motor. It quit working so what's best to replace it with. It quit working. So looking to replace it at best price. Let me know thanks.
 Reply

A  Answered on 3/14/2016 by InyoPools Product Specialist Lennox H.

Hi Steven, This motor is not available, it has been replaced with p/n BN50.
 Reply


?     Asked on 3/8/2016 by Teresa

My pool pumps number is model JwpaS5f-2a4. Will this pump work?
 Reply

A  Answered on 3/9/2016 by InyoPools Product Specialist Lennox H.

Hi Teresa, This motor can work with your JWPAS5F-2A4 pump, however this one has been replaced with p/n BN50. You will also need to purchase the Dual Speed Toggle Switch (18313301) in order to operate this motor. When replacing the motor we also recommend replacing the pump shaft seal and o-ring which can be found via the Sta-Rite JWPA Series Parts.
 Reply


?     Asked on 6/18/2015 by mitchell smiley

Do you not have the pump and motor all together in one pkg now?
 Reply

A  Answered on 6/18/2015 by InyoPools Product Specialist Patrick P.

Hi Mitchell, The Sta-Rite JWP pump has been discontinued and replaced by the Sta-Rite Dynamo Pump.
 Reply


?     Asked on 6/1/2015 by jeff

does this motor come with the impellers on it
 Reply

A  Answered on 6/1/2015 by InyoPools Product Specialist Andy O.

Jeff- The 1 1/2 HP 2 Speed 115V Motor for JWP Pump (620032032) is just a motor and does not come with any other parts attached to it.
 Reply


?     Asked on 2/4/2014 by Guest

Does motor model number 620032032 come with a 2-speed switch?
 Reply

A  Answered on 2/4/2014 by InyoPools Product Specialist Patrick P.

Yes, model number 620032032 does come with a 2-speed switch.
 Reply