18" A/G Sand Filter System - 1 HP Pump - JSAL180E-03

$555.99

IN STOCK
FREE SHIPPING

Model # JSAL180E-03

By Sta-Rite

  4 Average  

Details

Top

Model # JSAL180E-03

Alternate Part #'s SRCF2019DE1160

Product Description

Waterford  Aboveground Sand Filter System by Sta-Rite

  • Maximum capacity, minimum maintenance and cost
  • Add sparkle to your aboveground pool and spend less time maintaining it. Sand media is a long-established method of pool water filtration and Sta-Rite® raised the bar with its Cristal-Flo™ II sand system.
  • Great performance and efficiency. The filter tank requires minimum maintenance. A simple turn of the multi-port valve lever accomplishes routine backwashing.
  • The tank’s sophisticated design, internal components and even hydraulics have been engineered to maximize filter performance and extend time between cleanings.
  • Unionized pump to filter connection allows for easy installation and servicing.
  • Combination water and sand drain makes servicing and winterizing fast and easy.
  • The JWP pump features precision-manufactured components, rugged construction and a continuous duty, smooth running motor for years of quiet,dependable service.
  • One-year limited warranty

Pump & Filter Specs:

  • Filter: StaRite Waterford Filter 18" Tank
  • Filter Area: 1.8 Sq. Ft.
  • Filter Valve: 1-1/2" Top Mount Valve
  • Turnover Capacity in 8 Hrs: 16,000 Gallons
  • Sand Required: 150 Lbs.
  • Pump: StaRite 1 HP JWP Series
  • Voltage: 115 Volt
  • Full Load Amps: 12.0
  • Pump Port Size: 1-1/2"
  • Pump Cord: 3' Standard 3-Prong Cord
  • Warranty: One-year limited

The low cost, easy-to-maintain filter system
Cristal-Flo™ II aboveground sand filter systems offer a variety of pump and filter combinations that allow you to precision-match your system to almost any pool requirement. Everything is easily assembled on an attractive, robust platform. And nothing could be easier to operate or maintain—a simple twist of the wrist puts the Cristal-Flo II filter system in backwash mode for quiet, efficient cleaning action.

Economical
The sand filtration media is permanent—no need to replace cartridgestyle elements.

Built to last
The Cristal-Flo II filter tank and internal components are constructed of heavy-duty polyethylene, and the pump is made of Sta-Rite’s exclusive Dura-Glas™ composite resin. This system won’t corrode and resists the elements for years of service.

Product Specifications

HP:
1 HP
Tank Diameter:
18 in.
Pump:
JWP Series
Filter:
Sand
Speed:
Single
Cord Type:
Standard
Top

?     Asked on 5/16/2017 by Darin Zurn

Do you carry just the JSAL180E-03 tank/base and base for the pump? I replaced the valve and the internal tubing and pump last year. Thanks!

A     Answered on 5/20/2017 by InyoPools Product Specialist Lennox H.

Hi, Darin. If your system is not later than 2009, you can use the System Base - 155333P.

?     Asked on 6/23/2016 by Judy Hannan

How do I find out which spider gasket I need to fix my Multi port Sta-Rite T180WF sand filter ?

A     Answered on 6/27/2016 by InyoPools Product Specialist Lennox H.

Hi Judy, The gasket is no available separately, you will have to replace the Valve Diverter w/Gasket (272512).

?     Asked on 6/5/2016 by

I have a starite crystal-flo pool pump and I can't find the model number. I need a new tubing that goes from filter to pump motor.

A     Answered on 6/5/2016 by InyoPools Product Specialist Patrick P.

If you don't have the model # then you will need to measure the hose, once this is done you can find your hose on the Sta-Rite Cristal Flo Hose Page. You then need to click into each hose on that page and then click on the Dimensions Icon on the product details page and compare the length to your hose.

?     Asked on 5/30/2016 by Joe darmochwal

I have srcf2019de1160 system. I need to replace hose between pump and filter. What is part number thank you?

A     Answered on 5/30/2016 by InyoPools Product Specialist Patrick P.

Hi Joe, You would require the Sta-Rite 18" Sand Filter Pump to Filter Hose

?     Asked on 7/22/2015 by

I LOOKED AT THE WEBSITE AND THE MANUAL BUT IT DOES NOT SHOW HOSES AND WHICH HOSE GOES WHERE ON THE POOL. CAN YOU HELP ME WITH THAT?

A     Answered on 7/22/2015 by InyoPools Product Specialist Hector F.

This package does not come with the hoses that connect the pool to the pump and from the filter to the pool. You can use any standard 1.5 inch male threaded fittings that tapers/reduces down allowing you to clamp standard above ground hoses to them. One hose that you can reference to on our site is part number 4742-40.

?     Asked on 5/26/2015 by Paul Dailer

how much sand does it hold

A     Answered on 5/26/2015 by InyoPools Product Specialist Dennis R.

Hi Paul,  Sand Required: 150 Lbs. See "18" A/G Sand Filter System - 1 HP Pump" under Pump and Filter Specs.

?     Asked on 7/27/2008 by Guest

Which series pump comes with this filter system?

A     Answered on 7/27/2008 by InyoPools Product Specialist Patrick P.

This system comes with a JWP series pump.

?     Asked on 7/20/2006 by Guest

how do you install pump? i am trying to do it myself. i bought this exact combo and do not know where to begin. how do you ground it so you don't get shocked? can i just plug it in to my outside receptacle? how do you set up the filter?

A     Answered on 7/20/2006 by InyoPools Product Specialist Patrick P.

Here is a link to the owners manual that will help with the installation process.http://www.inyopools.com/owners_manual/sta-rite_pump_filter_waterford.pdf

Top

Review Summary

  (Average 4 out of 5 stars)
1 Ratings
5 star:
 
(0)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)