Where can I find the replacement bulb for this light as well as dimmensions on the replacement bulb? Also can I replace the bulb in my Swimquip light with a color changing LED bulb?
Reply
Here is a link to the replacement bulb for the swimquip light (120V 500 Watt - NA706) http://www.inyopools.com/Products/00100001005427.htm This page shows dimmensions of the bulb and you may purchase this bulb directly through the link above. Unfortunately at this time there is not a LED replacement bulb available for the swimquip light, all of the current LED replacement bulbs are too large for the Swimquip housing.
Reply
What are the dimensions of this light?
Reply
Total front to back, 7-1/2" (from front of the lens to the back of the light); Front to back, 6-5/8" (Just the copper shell of the light); 8-1/2" wide on the faceplate; 3-3/4" wide at the back of the shell.
Reply
I have an old Anthony pool light in my pool which needs to be replaced, I believe the Anthony light may have been discontinued, do you have a suitable replacement?
Reply
> >The Anthony light has indeed been discontinued and the Swimquip light fits most old Anthony pools underwater lights. The Swimquip light measures 8-1/2" outside diameter, Front of lens to back of light 7 1/2" and shell rear diameter measures 3 - 3/4"
Reply
Will this bulb fit my Sta-Rite Swimquip light.
Reply
Yes. The J & J pure white bulb will fit the Sta-Rite Swimquip lights. Please make certain to order the correct >replacement gasket for the Sta-Rite Swimquip light. The J & J pure white bulbs come with a gasket for the >Pentair Amerilite.
Reply
I have the Sta-Rite 05086 light. The housing for this light seems to be in good shape. The cord shows wear and i just need to replace the cord and gasket...do they sell just the cord without having to pay the price for the whole housing?
If not, is there a better light that can be installed into the same niche that is already in place?
Reply
James, The cords for pool lights isn't sold separately. Unfortunately, SwimQuip lights are unique so that's the only light that you can use with your niche.
Reply
I have a customer w/ an old swimquip #5072 120 volt 500W light fixture. What is the replacement fixture? Part # as well as cost please
Reply
Hi John, This SwimQuip Light (05086-0025) would be the direct replacement for your swimquip #5072 120 volt 500W light fixture. To be on the safe side it would be good to double check page 3 of the SwimQuip Owner's manual which givess the exact Dimensions of the SwimQuip (05086-0025) Light.
Reply
I am trying to match an original that is quite dated. Pls let me know the outside diameter of the light fixture. I'm looking at the 500w fixture. Thank you.
Reply
Here are the complete dimensions on this light. Total front to back, 7-1/2" (from front of the lens to the back of the light); Front to back, 6-5/8" (Just the copper shell of the light); 8-1/2" wide on the faceplate; 3-3/4" wide at the back of the shell.
Reply
what I need is
pool light 5086
500w-120w
r40 lamp
use with niche # 5086- or 12or 15 or 17--waiting your reponse, thanks rick
Reply
Hi Rick, this would be the correct replacement light for your Swimquip 5086 light.
Reply
I need to replace a 120 volt Anthony fixture. Mine is 10" across. Is there a larger swimQuip that would work for me?
Reply
Hi Patty, SwimQuip light fixture are unique, it will not be able to fit into the niche that you have. If you ca provide us with photos or any other info on the fixture or niche we can find a replacement that will work for you.
Reply
swimquip 5055-11 light has dimensions of 8 5/8' across face ring and height of
7 1/2" from back to glass. very old fixture and was needing a 100' cord length 500w
is there a replacement?
Reply
Hi, Gary, The SwimQuip light has not changed over the years, the SwimQuip 05086-0100 is the replacement for the 500W, 120V 100' ft cord.
Reply
Recently had my pool re-plastered, discovered a leak coming out of the electrical conduit connected to the light. The light still works so how is the water getting out of the pool?
Reply
Hi Gary, The Light will still work as long as water does not get into the fixture. Water could be leaking if the conduit or channel for the cord has a crack.
Reply
Hi The light housing says freshwater only. Will this work in a salt water pool?
Reply
Hi David, Yes this light will work in a saltwater pool. Normally salt pools are maintained around 3,000 PPM of salt, this warning is for ocean water which more like 40,000 PPM of salt.
Reply
I ordered LED bulb for Swimquip light 05086 from your company and it does not fit.
It requires R40 base. Do you have one that will fit? 120 V -RGB
Reply
Hi Mike, We do not have any led bulbs that will fit the SwimQuip light fixture.
Reply
I need to replace a swimquip 5072 combined with 5068-12 50 ft of cord. is 05086-0050 a good replacemen? thank you!
Reply
Hi Bryan, This 500 Watt 120 Volt 25' Cord SwimQuip light is a suitable replacement.
Reply
can you tell me the diameter of the housing and the diameter of the ss flange?
Reply
Hi Ralph, The diameter of the SS Ring is 8-1/2" and the diameter of the housing starts at 5-1/2" then drops to 3-7/8".
Reply
Is there an LED replacement light that will fit in this niche?
Reply
The only item is this White LED Replacement Bulb there is not a color changing LED Swimquip replacement bulb.
Reply
Have 38 yr. old Anthony gunite pool need to replace entire fixture need to know width and depth measurements to be sure your fixture ill fit into existing shell . Thank you for your help .
Reply
Hi, Frank. Click this link > Product Dimensions to view the dimension of this fixture.
Reply
Anyone know what type of screw is in the light that goes into the housing? Dimensions? Will it fit a standard light housing?
Reply
Paul, There is no size listed as the thread is not a replaceable part. It accepts a standard edison base bulb.
Reply
do you have gaskets for the SwimQuip 500w light fixture. the number on the light's rim is 5055-11.
Reply
Hi Gary, yes we do carry this gasket and you will need this 3580-01 Swimquip Pool Light Lens Gasket
Reply
Replacing current light Swimequip #5086-15 120V, 500W: is this same product and can you replace the white bulb with multi-color bulb?
Reply
Hi. The ColorSplash LXG LED Pool Lamp 120V - LPL-P2-RGB-120 is compatible with this SwimQuip fixture.
Reply
I need to replace a light in my inground pool. The current light is Swimquip #5072 and is 500 watts. Which light do I need to buy?
Reply
Hi, Peggy. This SwimQuip 500 Watt 120 Volt 25' Cord - 05086-0025 can be used as a replacement.
Reply
Hello, I have a light fixture lens cover that reads 5055-11, will this fit in there or do I need another gasket or part?
Thanks for your help.
Reply
Hi, Buffalo. This model fixture will fit into your existing niche. You do not need other gaskets if you have an existing niche.
Reply
I have a swimquip #5072: 120 volt 500 watt R40 lamp Stamp says (use with niche #5068-12). Every tight I've seen has #5086. What's the difference?
The 0586-12 series swimquip niches are specifically for inground liner swimming pools.
Reply
Can I install a color led bulb in sta-rite 05086-0025
Reply
Hi Doug, Yes you can, you need this PL5811 SwimQuip LED Color Changing Replacement Bulb 120 Volt
Reply
I need to switch out my pool light fixture but I can’t tell exactly which one it is. The only number I can find is on the glass it self 5055-3
Reply
Hi, Patrick. The SwimQuip Light Fixture is the replacement you'll need.
Reply
I need a replacement bulb and gasket for pool light model number 5057 with a niche model number 5058-12 pool is concrete with fibre glsss walls and is 40 yrs old are parts still available and if not what model number can i buy to replace the entire unit.
Hi, Liam. Replacement parts are available on the Sta-Rite / Swimquip Pool Light Parts Diagram page. With a fixture that old I recommend replacing the entire fixture. Complete fixtures are listed on the Sta-Rite SwimQuip Lights. You will need to determine the voltage and card length.
Reply
I have a swimquip 5072 light fixture that needs to be replaced. Is the correct replacement model? Can you suggest a color changing LED bulb that will work with the replacement fixture?
Reply
56-102-1136 should be correct.
Reply
2 questions: If I replace the entire fixture, does it come with the bulb and is it an led bulb with 500w equivalent? Also, if I don't need the power cord do I still need to order the whole kit? Can I use my existing wiring so that I don't have to re-run the cable? Thank-you.
Reply
Hi, Lorne. This fixture does include a 500 watt incandescent bulb. You can purchase an LED bulb for this fixture which is only equivalent to like 250 watts. The power cord for the fixture is required for the proper installation and functionality of the fixture. You cannot splice the cable.
Reply
What replacement do I need for a Swimquip No 5086 inground pool light - 12 v with a 500W R40 Lamp
Reply
Hi, Roger. A 500 watt is not available in 12v, only 120v. This 05086-0025 can be used if a 25' cord is sufficient.
Reply
I have an old sta-rite sunbrite #05502-xxxx 500 watt light. The entire light kit should be replaced. do i replace with the swimquip 500 watt kit. Guess I have to replace the line as well?
Hi Leslie, The only light we have confirmed that will work as a replacement for the Old Swimquip SunBrite light is this Pentair IntelliBrite Pool Light. Yes you will need to pull out the complete light and cord and pull the new cord. We do have a Video on How to Install a Pool Light which you may find handy when you tackle this project. Also note that the Intellibrite is an LED Color Changing Light.
Reply
I have one like that, but I would like to replace by Hayward Astrolite 300W 120v. I do know if it fit in the same niche.
Hi Vinny, The Hayward Astrolite will not fit the Swimquip Niche. We would suggest this Swimquip White LED Replacement Fixgture by J&J we currently show we have 2 in stock.
Reply
Im looking for a replacment lens for the sta rite
Reply
Hi William, can you please provide the model number of your pool light or send us a few photos of it? To supply photos simply click the reply link below and upload your photos. We would need a photo of the main light label, the very front of it, and also the depth and diameter dimensions of the fixture itself. Once we get those photos we can make the proper recommendation.
Reply
I am looking for two replacement pool lights. I want to change out my exiting incandescent lights, to LED lights. Possibly using Changing Color lights or just Brite White. Which fixture will fit my existing Wet Niche that is shown in my photo? I need a 30' cord light and a 100' cord light. Thank you.
Hi Sean, You would require this LED Color Changing 120V SwimQuip Replacement Light Fixture w/ 50' Cord. This fixture replaces your SwimQuip light fixture and is LED Color Changing.
Reply
Thank you. I will call you guys for pricing and shipping info to Hawaii.
Reply
Thanks Sean, you can give us a call at 407-834-2200
Reply
Patrick I see that this fixture (SwimQuip Light 500 Watt 120 Volt # 05086 comes with an incandescent light. Just want to make sure that if I buy an LED light bulb, it is compatible with this fixture and which bulb for a Bright White LED would that be? I tried to call the InyoPool number 407-834-2200 but was on hold too long, so I'm doing some more research through you instead. Thanks
Reply
Hi Sean, Sorry for the hold on the phone it has been quite busy. Unfortunately the SwimQuip Light 500 Watt 120 Volt # 05086 is no longer available however this light fixture here will include the light fixture and LED bulb, so it is the complete light fixture with bulb LED Color Changing 120V SwimQuip Replacement Light Fixture w/ 50' Cord.
Reply
Patrick. So just to be clear this fixture Color Splash XG Series LED Pool Fixture 120V - 50' - Polished SwimQuip Version - LPL-F2C-120-50-PSQ is compatible to the wet niche I have existing? Also does the light come in LED White? (No color) Thank you.
Reply
Hi Sean, Yes this fixture Color Splash XG Series LED Pool Fixture 120V - 50' - Polished SwimQuip Version - LPL-F2C-120-50-PSQ is compatible with the wet niche you already have. We only carry this light fixture in color changing, however, one of the colors is white so you can select white as your default option and each time the light turns on it can be locked to white.
Reply
Hi...need to replace an old swimquip 5086 120v 500 watt...I'm assuming the Color Splash XG Series LED Pool Fixture 120V - 50' - Polished SwimQuip Version - LPL-F2C-120-50-PSQ will do the trick??
Reply
Hi Charles, Yes this would be the correct replacement light.
Reply
