How To Replace The Front And Back Skirt On The Pool Cleaner


  0 out of 5 stars on 0 ratings
(Click on a star to add your rating)

The Poolvergnuegen pool cleaner has adjustable skirts that allow the cleaner to maintain optimal suction under the machine even when it encounters obstacles. When the cleaner encounters an obstacle one (or more) of the skirts will lift up over the obstacle while maintaining suction under the cleaner.  Over the course of time, the skirts may become damaged and the cleaner may move slowly or not move at all. This guide will show you how to fix replace the front and rear skirt.

Things You'll Need

Step by Step


Step 1

Turn off the pool pump and disconnect the hose from the head of the cleaner.

Step 2

Turn the cleaner head upside down.

Step 3

You will need to pull off one skirt tabs with force. It will feel like it is going to break off but it won’t.

Step 4

Once you have the first tab off, you can slide the rest of them over (notice the indent on the tabs) and pull them out easily.

Step 5

Repeat this process for both the front/back if necessary.

Step 6

Once you have removed the skirt, you can install the new one.

Step 7

Place the new skirt tab in position and slide it over to the left or right.

Step 8

Once they are all in place, push the last one into place with a little force. It is easier to to push down on one side then the other.

Step 9

Repeat this process for both the front and back if necessary.

Step 10

Once all the skirts have been replaced, you can reconnect the hoses and test the cleaner.


(1 to 1 of 1)

 Posted: 12/3/2021 

your right i thought they were going to break but they didn't,thanks for the info