How To Replace the Bottom Plate on a Polaris ATV Suction Cleaner

It appears that your browser has JavaScript disabled:
To provide the best experience on our website, we require your browser to have JavaScript enabled.
Here are the instructions for how to enable JavaScript in your web browser.
Once you've enabled Javascript, please refresh this page.

Or give us a call at 407-834-2200, and we would be happy to take your order by phone.

How To Replace the Bottom Plate on a Polaris ATV Suction Cleaner

WRITTEN BY: Inyo Pools

5 out of 5 stars on 1 ratings
(Click on a star to add your rating)

The Polaris ATV Cleaner Bottom Plate helps the Polaris ATV Cleaner travel over sharp corners or high spots on the pool surface. After time, the Bottom Plate will wear down to a point where it has to be replaced. This guide shows you how to replace the Polaris ATV Bottom Plate.

Step by Step

Top

Step 1

ORDER PARTS - The first step is to order the parts you will need. The only part you may need for this procedure is the Polaris ATV Suction Cleaner BOTTOM PLATE. Note: the Polaris ATV and the Polaris 340 are the same product.

Step 2

REMOVE BOTTOM PLATE - Turn the Polaris ATV Cleaner upside down and remove the Bottom Plate. It is held on with two screws.

Step 3

REPLACE BOTTOM PLATE - Place the Bottom Plate into the triangular hole on the bottom of the Cleaner and secure it with two screws.

Step 4

REPAIR IS COMPLETE - That's all there is. Your Polaris ATV Suction Cleaner is ready to go.