Product Description

CMP Drains are VGB Compliant!

All Custom Molded Products (CMP) drains are listed and tested in strict accordance to the
requirements of ANSI/APSP-16 2011, the current standard of reference for the Virginia Graeme Baker
Act, and compliant to the latest Consumer Product Safety Commission (CPSC) requirements.

General VGB compliant Notes:

•  Mount suction outlets on the wall or floor. DO NOT locate suction outlets on seating areas or on backrests for seating areas.
• Always use multiple suction outlets. DO NOT use with single drain applications. Use with single drain applications will void any and all warranties.
• When using two or more suction fittings on a common suction line, suctionsmust be separated by a minimum of 3 ft or they must belocated on two different planes (i.e. one on floor and one on the wall).
• To reduce the risk of drowning from hair and body entrapment, install suction fittings with a marked flow rate in gallons per minute that exceeds the flow rate of your system by at least 25%.
• Increasing size of the pump may increase flow rate of suction beyond rated safety limits causing entrapment or death.
• CMP drain covers are only certified for use with CMP sumps and frames. Do not mismatch with parts from other manufacturers.

Your Source for Swimming Pool & Spa Parts With 40,000 Parts in Stock - INYOpools.com

Review Summary