Part # APCK1139
Kit Includes: 4: O-rings, 1: Gasket, 1: 6 Gram Silicone Packet
I need to purchase a new gasket for the top lid on a Pentair Triton II sand filter. Could you let me know if the APCK1139 o-ring kit would be what I need to purchase?
Hello Cynthia - The APCK1139 kit would include the 6" lid o-ring for the Triton II filters with the 6" lids.
I am going to change out the sand in my Triton II (TR-100) (p/n 140210)(7/27/2011) filter and wanted to know if this kit provides all of the O-Rings that would be needed as I would like to change all of them at the time of this service.
Hi Damon, yes this is the correct seal kit for the Pentair model TR100 Triton sand filter.
Will this O-ring kit fit a Pentair Triton II TR60 sand filter? Anything else I should get if I'm replacing sand?
Hi John, Yes this is the correct kit for the TR60 sand filter. The only other item I could think of would be the laterals for the sand filter but those only need to be replaced if you find any cracked laterals when you are replacing the sand and you won't know that until you remove the sand. The laterals can be found as key #15 on our Triton TR Sand Filter Parts Page Also not sure if you saw our Video on Replacing Sand in a Triton TR Sand Filter as this should be helpful when you tackle this job.
i have a TR140C that is leaking from the Bulkhead seal, is this kit compatible?
Hello Robert. The PacFab TR Series O-ring Kit APCK1139 is compatible with the Pentair Triton Commercial Sand Filter TR104C, P/N 140316. Attached please find an exploded parts diagram for the Triton Commercial Sand Filter TR Series. Pentair Triton Commercial Sand The part numbers identified in the APCK1139 Product Description can be cross referenced in the Alternate Part Number section of each individual part listed in the exploded parts diagram.
Less than 1 hr
The lid opener that came with the filter
I ordered this kit because after the freeze here in Texas , I had a lot of damage. After replacing the needed parts, it was still leaking from certain places on the filter, so I replaced all of the o-rings and this solved my problem!