Part # GOKIT40
Part # GOKIT40
Alternate Part #'s ALDGO-KIT40, APCK1036
INYOpools highly recommends replacing the shaft seal, o-rings and gaskets when replacing your motor, if you use your old shaft seal it will not mate up properly with the new pump and may leak. The best value is to go with one of INYO's tune up kits which include the shaft seal and all O-rings, gaskets and lubricant for your pump.
This Tune Up Kit Works on These Pumps:
Tune Up Kit Includes:
For More Pool Pump Motors
Hello again, I've been informed that you've answered to my previous question about the Tune up kit, but
I can not find your answer!
That would be the correct seal kit for your pump and yes we would be able to ship that to France.
Hello, I own a Premier 555M2N-1550R. Serial no 21012CA4 1.5HP water pump. I want to buy your Tune up Kit premier 555N.
The impeller housing is leaking, I have to change the seal and O-rings
Is this kit complete, and do you ship in France?
Good Afternoon Henrik, Yes depending on the item we can ship to France. Just checked on this item and yes we can ship it.
My pump is not priming even after cleaning impeller. Will purchasing this kit aid in fixing that problem?
The seal kit can help with loss of prime. I can't guarantee that it will solve your problem. The loss of prime could be from an air leak at the valves or plumbing in front of the pump.
I recently changed my pool motor and gaskets. I made sure to lubricate all the gaskets with vaseline. A few days later water is leaking from the pump. What did I do wrong? Help please!!
You never want to use vaseline on any rubber gaskets or o-rings. Vaseline is petroleum based and will deteriorate the rubber quickly. Whenever you change the motor on a pool pump it is recommended that you replace the gaskets and shaft seal as well. A >Go-kit contains the shaft seal, packet of non-petroleum based lubricant and gaskets you will need for your pump. If you already have the gaskets, you can purchase >Magic Lube.