By PureLine



Part # GOKIT62

Alternate Part #'s ALDGO-KIT62, APCK1060

Product Description

INYOpools highly recommends replacing the shaft seal, o-rings and gaskets when replacing your motor, if you use your old shaft seal it will not mate up properly with the new pump and may leak. The best value is to go with one of INYO's tune up kits which include the shaft seal and all O-rings, gaskets and lubricant for your pump.

This Tune Up Kit Works on These Pumps:

  • Jacuzzi P, PC, EP Series

Tune Up Kit Includes:

  • Shaft Seal
  • 2 - O-Rings
  • Square Diffuser Gasket
  • Square Seal O-Ring
  • Square Ring Case O-Ring
  • Lubricant

For More Pool Pump Motors


?     Asked on 2/13/2012by Guest

I recently changed my pool motor and gaskets. I made sure to lubricate all the gaskets with vaseline. A few days later water is leaking from the pump. What did I do wrong? Help please!!

A  Answered on 2/13/2012 by InyoPools Product Specialist Patrick P.

You never want to use vaseline on any rubber gaskets or o-rings. Vaseline is petroleum based and will deteriorate the rubber quickly. Whenever you change the motor on a pool pump it is recommended that you replace the gaskets and shaft seal as well. A >Go-kit contains the shaft seal, packet of non-petroleum based lubricant and gaskets you will need for your pump. If you already have the gaskets, you can purchase >Magic Lube.

?     Asked on 10/15/2014by Guest

My pump is not priming even after cleaning impeller. Will purchasing this kit aid in fixing that problem?

A  Answered on 10/15/2014 by InyoPools Product Specialist Patrick P.

The seal kit can help with loss of prime. I can't guarantee that it will solve your problem. The loss of prime could be from an air leak at the valves or plumbing in front of the pump.

?     Asked on 5/25/2016by Joe

I have a Jacuzzi P-series 1UR pool pump and am looking to replace the o-ring between the diffuser and impeller. I see that those parts are obsolete. Is the o-ring a standard size that can be found? Are the specs for it avilable?

A  Answered on 5/26/2016 by InyoPools Product Specialist Lennox H.

Hi Joe, That o-ring is not standard and unfortunately, we do not have the dimensions or specs on that o-ring. Also, the o-ring that goes between the diffuser and impeller does not have a KEY# for identification.

?     Asked on 10/14/2016by De Wiebersick

I have the Emerson Thrubolt 230v 2.5 hp part #5238-80 Nodec Corp will this kit be compatible? Thank you for your help!

A  Answered on 10/14/2016 by InyoPools Product Specialist Alex V.

De, The kit will be based on the pump model number not the motor. Can you please provide the pump model number?


Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
4 star:
3 star:
2 star:
1 star: