Part # GOKIT30
Part # GOKIT30
Alternate Part #'s ALDGO-KIT30, APCK1025
INYOpools highly recommends replacing the shaft seal, o-rings and gaskets when replacing your motor, if you use your old shaft seal it will not mate up properly with the new pump and may leak. The best value is to go with one of INYO's tune up kits which include the shaft seal and all O-rings, gaskets and lubricant for your pump.
This Tune Up Kit Works on These Pumps:
Tune Up Kit Includes:
For More Pool Pump Motors
I have purex AH-8 pump that is leaking. Do I replace the seal only or need the whole kit?
Also does the kit come with instruction.
Hi Danny, We would recommend that your replace all the gaskets along with the shaft seal. The kit does not include instructions but your can refer to our guides for examples of how this is done. See "How To Replace Pool Pump Gaskets" and "How To Replace a Pool Motor Shaft Seal".
My pump is not priming even after cleaning impeller. Will purchasing this kit aid in fixing that problem?
The seal kit can help with loss of prime. I can't guarantee that it will solve your problem. The loss of prime could be from an air leak at the valves or plumbing in front of the pump.
I recently changed my pool motor and gaskets. I made sure to lubricate all the gaskets with vaseline. A few days later water is leaking from the pump. What did I do wrong? Help please!!
You never want to use vaseline on any rubber gaskets or o-rings. Vaseline is petroleum based and will deteriorate the rubber quickly. Whenever you change the motor on a pool pump it is recommended that you replace the gaskets and shaft seal as well. A >Go-kit contains the shaft seal, packet of non-petroleum based lubricant and gaskets you will need for your pump. If you already have the gaskets, you can purchase >Magic Lube.