$26.99

Qty:

Details

Top

Part # WS009

Alternate Part #'s 99209100053, LS

Product Description

Lawn tubes are intended to be driven into the ground to provide a firm base for the straps of a safety cover to attach to. These lawn tubes can also be used for pavers.

When a pool has flowerbeds, brick on sand, or loose ground around it, that is extensive enough to prevent the installation of certain anchors, anchor tubes provide a superior installation solution. Their wide stance gives them the strength they need to keep the safety cover in place. With anchor tubes, simply follow your normal installation 
procedures hammering, or drilling 7/8" holes.


If you are going into brick pavers, the anchor tubes should go all the way into the loose ground, as you need them. Insert your brass anchors into the tops of the anchor tubes and attach your springs and straps to them as you normally would. In situations where the ground is abnormally loose, such as new construction, you may wish to hammer a length of rebar through your anchor tube for extra holding power.

 

 

  • Features of Lawn Stakes
  • 18 inches long
  • 15/16th inch outside diameter
  • Accepts a standard brass anchor (sold separately)
  • Aluminum Tube will not rust.
  • Used For Pool Areas Without Solid Concrete
  • Can be used to anchor safety covers in lawns/dirt or where the decking is pavers.


 

 

 

Top

?     Asked on 7/28/2015by Mike Wagner

what is the diameter of the 18" long safety cover anchor
 Reply

A  Answered on 7/29/2015 by InyoPools Product Specialist Bob D.

Hi Mike. The diameter of the Safety cover Lawn tube is 1".
 Reply


?     Asked on 10/5/2015by Jim

Are the anchor sleeve difficult to install ? Do you need to drill a whole ?
 Reply

A  Answered on 10/7/2015 by InyoPools Product Specialist Joe S.

Lawn tubes are intended to be driven into the ground to provide a firm base for the straps of a safety cover to attach to. Drilling will have to be done through the paver bricks
 Reply


?     Asked on 10/6/2015by Karen

What is the weight of the tubes?
 Reply

A  Answered on 10/7/2015 by InyoPools Product Specialist Joe S.

Each piece will way about one pound
 Reply


?     Asked on 10/8/2015by Heather

Can these be driven in to the lawn/grass? We only have a 1' radius around the pool then the grass.
 Reply

A  Answered on 10/9/2015 by InyoPools Product Specialist Joe S.

Lawn tubes are intended to be driven into the ground to provide a firm base for the straps of a safety cover to attach to. These lawn tubes can also be used for pavers.When a pool has flowerbeds, brick on sand, or loose ground around it, that is extensive enough to prevent the installation of certain anchors, anchor tubes provide a superior installation solution. Their wide stance gives them the strength they need to keep the safety cover in place. With anchor tubes, simply follow your normal installation procedures hammering, or drilling 7/8" holes. If you are going into brick pavers, the anchor tubes should go all the way into the loose ground, as you need them. Insert your brass anchors into the tops of the anchor tubes and attach your springs and straps to them as you normally would. In situations where the ground is abnormally loose, such as new construction, you may wish to hammer a length of rebar through your anchor tube for extra holding power.
 Reply


?     Asked on 11/1/2015by Inyo Visitor

Is the brass insert included?
 Reply

A  Answered on 11/2/2015 by InyoPools Product Specialist Robert M.

Yes, the brass insert is included.
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
4 Rating
5 star:
 
(4)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews