Model # W03000
Alternate Part #'s BAR-20-268, ZODW03000
Why purchase a Zodiac G3 from Inyo?
Lowest Prices Guaranteed!
No need to wonder if you are getting the best price on the Zodiac G3! Find a competitor with a lower shipped price on the same product and we'll beat the price! Simply contact us with the competitor's website and product information and we'll BEAT their price! If we are unable to beat the competition's price, we will send you a reward code for $10 off your next purchase of $50 or more.
Never worry about cleaning your pool again.
The Zodiac G3 from Zodiac does all the pool cleaning for you.
Zodiac G3 IS TIME-TESTED.
This top-of-the-line Zodiac G3 pool cleaner will thoroughly clean your inground pool floor and walls to automatically remove dirt, debris, bugs, twigs, leaves, sand and even pebbles. Its bumper fin and anti-stick design ensure maximum coverage and increased maneuverability.
Zodiac G3 IS EASY TO INSTALL.
You can install the Zodiac G3 cleaner in minutes. Since it's pre-assembled in the box, just attach the disc and Long-Life hoses. No tools are required. We even include an easy-to-follow video to show you what to do. The Zodiac G3 also has the FLOWKEEPER ® , a self-adjusting water control valve and surface skimmer all in one, which automatically regulates water flow ensuring peak performance.
Zodiac G3 IS POOL OWNER FRIENDLY.
The Zodiac G3 is one of the most pool-owner-friendly cleaners ever made. It has only one operational moving part, the Long-Life diaphragm. If it should ever need service, its patented Quick Release Cassette lets you remove it, service it yourself or replace it poolside.
Zodiac G3 IS QUIETER.
Other automatic pool cleaners have a flapper, which makes an annoying hammer noise. The Zodiac G3 swimming pool cleaner is built to work quickly, effectively and quietly.
ZODIAC , a leading manufacturer of automatic pool cleaners, has designed the Zodiac G3 to clean your inground pool more thoroughly, effectively, and economically than ever before. No other automatic pool cleaner is built better.
Patented Long-Life Diaphragm
The Zodiac G3 Pool Cleaner has only one operational moving part-the Long-Life Diaphragm, ensuring peak performance, maximum power and low-cost maintenance.
Compact self-adjusting flow control valve automatically regulates water flow, ensuring peak performance even with lower horsepower pumps.
2-Year Limited Warranty
The Zodiac G3 is warranted against manufacturing defects and all wear and tear for 2 years. Even the hoses are covered for 2 years.
Durable, scuff-resistant hoses are suitable for pools with Diamond Brite® or Pebble Tech® finishes.
Click here for more Baracuda Pool Cleaners
How can I tell when the foot is worn out? Would this prevent it from moving?
My unit has stopped moving even though filter and baskets are clean and valves are set properly.
Hi, Tony. The Footpad, Yellow - W70327 will wear similar to a tire when the threads are worn down it will prevent water flow into the unit causing it not to move. You may also want to look into the checking the Long Life Diaphragm - W69698 for any holes or tears.
Thank you for your reply. Yes, it was a split in the diaphragm, ordered replacement. Good info on the footpad, I’ll keep my eye on it. Thanks again, Tony
My Zodiac G3 runs about 1 to 2 minutes after it gets hooked up and then stops. I then can't get it going again. What am I doing wrong?
Andrew, If the cleaner stops then starts, check diaphragm for blockage or damage. Use the Pool Pulse to determine proper flow.
Why does my Zodiac G3 go backwards not forwards?
Hi, Bob. This type of cleaner is designed to move in the opposite direction from the front of the unit. It will appear that the cleaner is being pulled by the hose.
I called Leslie pool store and they told me that the zodiac t3 is a updated model of the g3 is that correct? Also can I use the cyclonic leaf catcher with the g3?
Hi John, The Zodiac Baracuda T3 has replaced the G3 model, you can also use the Zodiac Cyclonic Leaf Catcher with the G3 Cleaner using the special adapters that is included with that unit.
My Zodiac G3 cleaner always gets stuck by the ladder on the deep end. Are there any adjustments I can make?
(5 out of 5 stars) Zodiac GC Pool Cleaner
Reviewed By: Thomas P. from Houston, TX ()
This is my second one. They are great cleaners and the instructions are easy to follow and easy to install. The G3 diaphragm will wear out along with the bottom part that rubs against the pool bottom and sides. This is normal but be aware about this maintenance issue. Actually both of these are easy to replace and I would suggest having both on hand.
(5 out of 5 stars) http://www.inyopools.com/Products/01100005000134.htm
Reviewed By: John M. from Dallas, TX ()
Pros: Works great, easy setup
Excellent in ground pool cleaner. Set up was a breeze and the cleaner worked great right out of the box. This one actually climbs the walls almost to the waters edge where my old one just cleaned the bottom.
(5 out of 5 stars) Effective Pool Cleaner
Reviewed By: Bobo V. from El Paso, TX ()
The Zodiac G3 inground pool cleaner is so effective that my pool looks as if it was newly painted. I was not aware that the existing pool cleaner was leaving so much debris behind!!! What a great investment!
(5 out of 5 stars) Outstanding Inground pool cleaner
Reviewed By: Louis E. from Sun City West, AZ ()
This is my second Zodiac G3 and it is an excellent pool cleaner. It not only cleans the bottom of the pool, but the sides of the pool to the water line. The diaphram is easy to change. I had my first unit for 5 years and only had to change the diaphram 4 times.