Model # NA210

Alternate Part #'s PSL-40-8235, ST1535

Product Description

This commercial-grade 1 1/2" vac hose features full flow, smooth inside walls, and an extra heavy duty outer construction that resists concrete scuffs and tears. The swivel cuff eliminates the aggravating kinks.

Frequently Bought with Pool Hose

Pool Vac Hose Reel

Flexible Vac Head for Concrete or Fiberglass Pools

Vac Head for Vinyl Liner Pools

Product Specifications

35 ft.

?     Asked on 1/24/2013by Guest

Our vacuum hose for our in-ground pool is fine, but the plastic ends have deteriorated. Is there a replacement for the plastic fittings?

A  Answered on 1/24/2013 by InyoPools Product Specialist Patrick P.

Yes,there is. If you have 1.5" vac hose you can use the 3103-0. If you have 1.25" vac hose, you can use the 3103A.

?     Asked on 4/10/2015by Inyo Visitor

For the correct hose size, do you measure ID or OD of the hose?

A  Answered on 4/13/2015 by InyoPools Product Specialist Alex V.

Mark, You would measure the i.d of the hose. The 1.5" refers to the i.d. of the hose.

?     Asked on 5/11/2015by Casey

I have 1.5 inner diameter on the coupler that joins 3 hose sections to make up 35 feet of hose. Do we measure the hose diameter (without coupler) or coupler as it mates to my Zodiac Baracuda G3 cleaner?

A  Answered on 5/11/2015 by InyoPools Product Specialist Patrick P.

Hi Casey if you will be using this for a Baracuda G3 pool cleaner than this would not be the correct hose for you. You would require the Baracuda G3 Hose or we als carry the Generic Baracuda G3 Hose.

?     Asked on 7/14/2015by yvette

i have a 20 x 30 foot above ground pool dont know the name of it but need new hoses to lead from both intakes on th sides of the pool cant find them anywhere can you help me thank you

A  Answered on 7/16/2015 by InyoPools Product Specialist Lennox H.

Hi Yvette, The Flex Hose Kit, 6 Ft (155151) will be your best option. It comes with (2) hoses, (4) hose adapters, and (4) hose clamps.

?     Asked on 2/21/2017by Inyo Visitor

Does this hose have a connector on one end that fits over a typical Hayward vacuum?

A  Answered on 2/22/2017 by InyoPools Product Specialist Hector F.

These manual vacuum hoses are not designed to fit on the head of the common Hayward automatic vacuum cleaners. Those cleaners specifically use lead hoses designed for those cleaners.


Est. Repair Time

Less than 1 hr

Tools Needed


Vacuum Seal - Hose Attachment Diameter

Written on 7/19/2019 by Guest

Attachment nozzle may not seal fully into vacuum plate. If you wrap it once around with duct tape, gorilla tape or electrical tape it should make a good seal.

Were these instructions helpful? 


Review Summary

 (Average 4.8  out of 5 stars)
10 Rating
5 star:
4 star:
3 star:
2 star:
1 star:

The Most Helpful Review

The Most Recent Reviews