Model # NY105

Alternate Part #'s R20440

Product Description

  • Quart container

    Visible algae:
    1. Brush algae spots prior to application. If necessary, brush once each day for two days following application.
    2. Dilute the proper dosage of the concentrate with at least nine parts of water.
    3. Apply diluted dosage through a plastic watering can into water around edge of pool.

    Visible algae growth:
    Mix 12 oz. per 10,000 gallons of pool water. Remove settled algae debris by vacuuming.

    Very dirty pool with heavy algae growth:
    1. Vacuum, clean, and scrub walls.
    2. Apply dose of 12 oz. per 10,000 gallons of pool water.
    3. Vacuum to remove algae debris.

    Maintenance dosage (Free of visible algae) :
    1. Apply 6 oz. per 10,000 gallons of pool water every 5 to 7 days.
    Note: If high temperatures prevail or pool has unusually heavy use, add maintenance dose more frequently. Buy 4 quarts and SAVE!

Click here for more Pool Chemicals

Product Specifications

# of 1 qt Bottles:

?     Asked on 10/13/2018by Vicki

I am closing my pool for the winter and I was told that I should put a super algaecide in before covering. Do you recommend this and is the product you would recommend to use? Thank you.

A  Answered on 10/17/2018 by InyoPools Product Specialist Lennox H.

Hi, Vicki. You can use this Super Concentrated Algaecide or get a Pool Winterizing Kit .

?     Asked on 4/23/2016by kam wong

i use super concentrated algaecide. when i add water to the pool, the water foams up. You guy told me to use shock to take care the algaes. The clorine level in the pool at the max. Will this high chlorine level hurts the plaster or the pool equitments? What other algaecide yousell does not cause forming? Thanks

A  Answered on 4/27/2016 by InyoPools Product Specialist Lennox H.

Hi Kam, You will need to use shock with this algaecide, to reduce foaming I would recommend mixing this product with water before adding it to the pool. If the chlorine level is high for a short period of time it will not harm the pool surface or equipment. The algaecides we have can cause foaming depending on the pool chemistry.

?     Asked on 7/29/2006by Guest

Following chemical treatment, how long do I have to wait before I use my pool?

A  Answered on 7/29/2006 by InyoPools Product Specialist Patrick P.

With the exception of superchlorinating (which requires waiting until the chlorine level drops to recommended levels), you can generally use your pool when the chemical is dispersed throughout the pool. Fifteen minutes to one hour is a good rule of thumb.


Review Summary

 (Average 4.8  out of 5 stars)
10 Rating
5 star:
4 star:
3 star:
2 star:
1 star:

The Most Helpful Review

The Most Recent Reviews