$79.99

Qty:

Details

Top

Part # HI111

Dimensions 2" L x 2" W x 2" D

Alternate Part #'s 37462, 840040, BPELC/SPA, ELC, HI-111, MR16, SVXH24PAK12, TXL175, 57-323-1111, FIBHI111, FST-301-3108, SPP-1361, SSRHI111

Product Description

Replacement bulb for Fiberstars 2000, 2004, 2008 illuminators

250 watt  24 volt halogen

This bulb replaces the old style HI-110 19.7 volt bulb which has been discontinued.

Please note, this bulb is for the Fiberstars 2000 series only; the bulb for the 6000 series is included in the Y20-6000 lamp assembly.



Top

?     Asked on 3/6/2007by Guest

I have an FS4 Series illuminator with an old HI-110 19.7 volt 183 watt light bulb. What replacement bulb do I use?
 Reply

A  Answered on 3/6/2007 by InyoPools Product Specialist Patrick P.

The proper replacement bulb for the FS4 Series Illuminator is the HI-111 24 volt 250 watt bulb.  FIberstars has discontinued the HI-110 and replaced it with the HI-111.
 Reply


?     Asked on 3/30/2008by Guest

I have a fiberstar light with a 19.7 volt 200 watt bulb. What is the correct replacement bulb?
 Reply

A  Answered on 3/30/2008 by InyoPools Product Specialist Patrick P.

The proper replacement bulb is the HI-111 24 volt 250 watt bulb. We have spoken with Fiberstars several times regarding this bulb and they confirmed the HI-111 24 volt 250 watt bulb is the direct replacement for the older style 19.7 volt 200 watt bulb which they have discontinued.
 Reply


?     Asked on 1/24/2012by Guest

Is there a warranty on this bulb?
 Reply

A  Answered on 1/24/2012 by InyoPools Product Specialist Patrick P.

No. Unfortunately the manufacturer does not offer a warranty on the HI111 bulb.
 Reply


?     Asked on 5/24/2015by linda

I have an FS3 CR lighting system, I went to change out the bulb,(HI-110) but the base that it is inserted into broke, is there a replacement for this?
 Reply

A  Answered on 5/24/2015 by InyoPools Product Specialist Patrick P.

Hi Linda, The B9155 Socket would be the correct replacement socket for the Fiberstars FS3CR illuminator.
 Reply


?     Asked on 5/24/2015by Tom Mullen

We have replaced the halogen bulb but the lighting in the pool is still very dim. Is there any other part that we should replace or check in the lighting system itself. (or a special part we should be looking at) thank you
 Reply

A  Answered on 5/24/2015 by InyoPools Product Specialist Patrick P.

Hi Tom, Sometimes the ends of the fiber-going into the fiber head of the illuminator need to be re-cut over time and this can give you brighter lighting. Here is a Good Video On Cutting Fiber which may be helpful for you.
 Reply


Top

Review Summary

 (Average 4.91  out of 5 stars)
10 Rating
5 star:
 
(9)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews