ColorLogic Light 120V 100' Cord w/ White Plastic Face Ring Gen. 4.0 - W3SP0527LED100

Model # W3SP0527LED100

By Hayward Pool Products

  5 Average  



Model # W3SP0527LED100

Product Description

 Hayward ColorLogic Pool Lights 

Nothing makes water more vibrant than light and color. But what separates ColorLogic 4.0 from any other lighting system is its ability to take light and color to a whole new level. ColorLogic 4.0 starts with five fixed colors that can be enhanced with seven color-changing shows. Integrate it with Pro Logic's Network Module, and you get four additional shows with adjustable speed, motion and brightness control and a brilliant spectrum of 101 adjustable colors. It is a color palette and synchronization that is as unequaled as it is inspiring.

LED technology makes ColorLogic 4.0 the brightest and most responsive lighting system ever, so your pool comes alive. LEDs are extremely efficient and can save up to 79% on energy costs when compared to traditional pool lighting. The streamlined, sealed units are watertight and easy to install. There are no bulbs to change, no color wheels, and no moving parts for noiseless and service-free operation.

Key Bonus Features when integrating ColorLogic 4.0 with Pro Logic

  • Four new shows for a total of 16 which include 5 fixed colors
  • Customize the 5 fixed colors with up to 101 different color tones to match a theme or activity
  • Speed adjustments allow light shows to be controlled with 9 different settings
  • Motion control puts the lights in action to add excitement and patterns in pool and spa
  • Brightness control sets the intensity of the lights from 20% to 100%
  • Power line communication technology built into every light allows communication between single and groups of lights with no additional relays or wiring required
  • All white light override feature for added safety

Due to the timing of shows and sequencing of lights, ColorLogic 4.0 is NOT compatible with ColorLogic® Gen 2.5 lights.

Be Dazzled with four additional shows with ColorLogic 4.0.

Eleven Exciting Color Shows:

Twilight: A constantly changing 1536 colors create a relaxing and sophisticated mood for evening entertainment.

Voodoo Lounge: When it's time to really get the party going, over 1500 colors uncork your pool.

Tranquility: Set the mood for a relaxing evening with this serene show of calming blues and white.

Gemstone: Vibrant blue, green and magenta make this show a jewel of a choice for any pool party.

USA! Show your patriotic spirit on the Fourth of July or any time with this star-spangled red, white and blue show.

Mardi Gras: Kids and adults alike will love the 36 fast-changing colors and atmosphere created by this cheerful show.

Cool Cabaret: Hit the disco and turn your pool into a nighttime hot spot with this vibrant shows featuring 36 different colors.

Harmony: Blue and green cross fade of colors

Rainbow: Slow roll through color spectrum Green, Blue, Magenta, and White

Custom Fade: Slow fade through Five user selected colors providing a show customized to your party or sports theme

Custom Chase: Watch the five user selected colors chase each other around the pool creating excitement and awe for your guests

Five Enticing Fixed Colors that can be set to 101 different tones:

Afternoon Skies:
Your evening pool, with middle-of-the-day blue..

Deep Blue Sea:
Rich, saturated color makes you feel like you’re swimming in the ocean.

Give your pool the alluring magic of gemstones.

The romance of Madrid, with a dash of fiesta.

Cloud White:
Show off your pool’s crystal-clear water by illuminating with Cloud White.

Product Specifications

120 V
Cord Length:
100 ft.
Face Ring:
White Plastic

?     Asked on 5/25/2021 by Bob D.

What is the correct replacement light for the Hayward color logic SP0521LED ?

A  Answered on 5/25/2021 by InyoPools Product Specialist Danny R.

This is the correct replacement light for the SP0521LED and will fit your niche.

?     Asked on 5/17/2021 by Greg

what is the direct replacement for color logic SP0521LED ? Will the replacement fit in the existing housing ? does the replacement come with the cord ?

A  Answered on 5/17/2021 by InyoPools Product Specialist Patrick P.

Yes this light will fit in your existing niche. This replacement does come with 100' of cord.

?     Asked on 6/9/2020 by Chris

Is this light (SP0527LED50) saltwater compatible?

A  Answered on 6/9/2020 by InyoPools Product Specialist Patrick P.

Hi Chris, Yes this can be used in a salt pool but not ocean water as a salt pool is 3,000 PPM of salt where ocean water is 50,000 PPM of salt.

?     Asked on 7/30/2019 by scott lindermann

will the spo527led replace my sp0523led light. it is a colorlogic bulb. thanks

A  Answered on 7/30/2019 by InyoPools Product Specialist Lennox H.

Hi, Scott. Yes, this SP0527LED100 is the correct replacement. 

  • Commented on 8/6/2019 by Product Owner

    The new color logic 4 bulb is out of synch with the other bulb. They turn on a slightly different times when both are powered on. What is the problem?

  • Commented on 8/3/2019 by Product Owner

    Why dont all the shows match up? Thx

  • Commented on 8/3/2019 by Product Owner

    I replace my old color logic 4 with the recommended sp0527led. Some of the color shows don't match up. Not all, but some. Why is this happening? Thx

?     Asked on 5/13/2018 by Francis Ward

I have 2 color-logic 4.0 one of them worked 1 time had warrenty replace, new light worked 1 time, is the problem 2 on same circuit.

A  Answered on 5/13/2018 by InyoPools Product Specialist Lennox H.

Hi, Francis. It's hard to say without knowing why they failed. It is okay to have multiple lights on the same circuit.  

?     Asked on 4/30/2018 by Tom Pallett

Is this the SP0527LED100 a direct replacement for the SP0525LED100

A  Answered on 5/1/2018 by InyoPools Product Specialist Joe S.

Yes the SP0527LED100 will be the direct replacement for the SP0525LED100.

?     Asked on 7/9/2017 by Tom Diecidue

I have two Hayward ColorLogic gen 2.5 lights. The model number that I currently have is SP0521LED. One of my lights has gone bad but I found out that they do not make that model anymore. I was looking to order the SP0527LED from you. I called Hayward and they said that the programs still sync with the 2.5 model. However, on your site it says different. Can you help me out with this? Will this model sync with my older model?

A  Answered on 7/12/2017 by InyoPools Product Specialist Patrick P.

Hi Tom, If you spoke to Hayward and they stated they will still synch then I would trust what Hayward has to say on this and that they will still synch.

?     Asked on 3/2/2017 by San

What warranty is provided for Hayward SP0527LED100?

A  Answered on 3/2/2017 by InyoPools Product Specialist Lennox H.

Hi, San. The ColorLogic light comes with a (1) year manufacturer warranty.

?     Asked on 10/8/2013 by Guest

How do I change the color options?

A  Answered on 10/8/2013 by InyoPools Product Specialist Patrick P.

Changing between the color shows is as simple as powering down the light (using a switch) and turning it back on within 10 seconds.

?     Asked on 10/8/2013 by Guest

How bright are the Colorlogic lights?

A  Answered on 10/8/2013 by InyoPools Product Specialist Patrick P.

The accepted comparison is that the color shows are equivalent to 225 watts and the white mode is comparable to 300 watts.

?     Asked on 4/21/2013 by Guest

Do you sell a replacement bulb for the Hayward ColorLogic LED light?

A  Answered on 4/21/2013 by InyoPools Product Specialist Patrick P.

Unfortunately there is no replacement bulb for the Hayward ColorLogic lights, they are sealed units. You would need to replace the entire light itself.

?     Asked on 1/20/2012 by Guest

For a color-changing LED light, how do I switch between the different settings with just a standard light switch?

A  Answered on 1/20/2012 by InyoPools Product Specialist Patrick P.

The LED lights are designed to move to the next programmed setting each time you turn the switch on and off.  This will toggle through the different color settings and shows.

?     Asked on 8/30/2009 by Guest

Do i just need the light and my current prologic controller which runs my pool filter and spa etc.. or do i have to have a separate controller for the colorlogic led pool light?

A  Answered on 8/30/2009 by InyoPools Product Specialist Patrick P.

You can use just the ProLogic to control the ColorLogic light but you will only be using a fraction of the overall control capabilities. To get the complete control capabilities you would need to order the ColorLogic Gen. 4.0 light here along with the ColorLogic Communication Module here using the ColorLogic Communication Module with the ProLogic the ColorLogic lights will display 101 color tones, 16 themed shows, while controlling light brightness, speed and movement.

?     Asked on 8/7/2009 by Guest

What is the ColorLogic Network Module designed for?

A  Answered on 8/7/2009 by InyoPools Product Specialist Patrick P.

The ColorLogic network module is designed to be used with the new ColorLogic 4.0 lights and the ProLogic System. When used together the ColorLogic lights will display 101 color tones, 16 themed shows, while controlling light brightness, speed and movement. The 4.0 ColorLogic Lights can be seen here The ProLogic Systems & ColorLogic Modules can be seen here


Review Summary

 (Average 5  out of 5 stars)
3 Rating
5 star:
4 star:
3 star:
2 star:
1 star:

The Most Helpful Review

The Most Recent Reviews