Part # SP1500FT
Alternate Part #'s HAY-30-1500, HAYSP1500FT
Microprocessor Pump Timer. Easily connects to ALL Flex48 motor frames and is the only truly integrated Flex48 timer assembly. Audible and manual override settings.
Alternate Replacement:
Click here for more Hayward Pump and Filter
Is there a way to identify that my pump is in fact a FLEX48 pump? Also is there an installation guide?
Reply
If you look on your motor label there should be a marking labeled FR or Frame if your frame type is listed as 48 or anything with 48 in it (i.e 48Y, 48X, etc..) you would fine to use this timer. Some common pumps this timer will work on is the Hayward Power-Flo, Hayward Matrix, Pentair Dynamo, and Sta-Rite JSAL This timer is typically used on pumps used on an above ground pool and most above ground pool pumps have a 48 frame. You may view the installation guide for this timer here http://www.inyopools.com/manuals/164/hayward_controls_microprocessor.pdf
Reply
My motor doesn't have a plastic cap like the one in the picture. Will this still fit?
Reply
The SP1500FT will fit Flex 48 frame motors that have a plastic cap similar to the one in the picture. If you don't have one you will need to use an external timer.
Reply
I don't have a "Timer Microprocessor" on the cover and switch.
Can just the SWITCH be replaced? If so, can I just pop it out?
Reply
The switch by itself cannot be replaced. Hayward offers model SP1500FT as the replacement. It has a timer feature as well as the on/off switch.
Reply
How do you bypass sp1500ft timer to run pump manually
Reply
Jeff, Move switch from “RUN” to “OFF” back to “RUN” within 3 seconds. The pump will run for 1 hour and then return to the programmed mode you’ve selected.
Reply
