$1,687.99
By Hayward Pool Products
Model # H250P1
Alternate Part #'s HAY-15-658, HAYH250P1
The Hayward H-Series heater represents the very latest in heating technology for swimming pools and spas. H-Series heaters are easy to install and maintain, thanks to its low profile, light weight and CPVC plumbing capabilities.
Rust resistant water path, with injection-molded polymer header, offers improved by-pass control and extended life by providing additional protection from the damaging effects of erosion from high flow conditions.
Heat exchanger reliability is improved due to the reduction of condensation hat can form on tubes. Exclusive CPVC plumbing kit allows for universal heater replacement and maximum plumbing versatility.
Our patented single header "V" baffle design heat exchangers allow for long life, fast heating and virtually no condensation. All Hayward heat exchangers are now protected with highly resilient Cupro Nickel for greater durability and longevity.
Constructed of tough, durable stainless steel, H-Series burners can be removed individually or as a complete unit for easy maintenance and cleaning.
H-Series Thermal Efficiency Rating = 83%
1 year parts and labor limited warranty for single family residential users
I have a split in the "U" shaped line of the heat exchanger due to freezing, can this be welded closed or can this line be replaced?
Reply
Hello, I would send a photo and model of your unit to upload@inyopools.com so we can see due to your model whether this is one part sold together.
Reply
For winterisation, we Just have to open the drain valve on the side of the heater where the water input and output is, or there's an other place to drain the water?
Reply
Hello Guillaume, the drain valve on the side is where you would drain your water for winterizing.
Reply
Can I conect natural gas to my lp heater?
Reply
No you cannot connect Natural Gas to a LP heater. You would need a LP to Natural Gas to Conversion Kit to convert your heater to Natural Gas.
Reply
Where can my heater be installed?
Reply
There are specific venting requirements and clearance distances that must be met to ensure proper operation. Consult the owner’s manual for exact specifications for your model of heater.NOTE: Gas fired heaters should be diagnosed and repaired by trained personnel.
Reply
What is the difference between an Electronic and Millivolt ignition?
Reply
The basic answer is that Millivolt is the old style of ignition, using a standing pilot light. While the electronic ignition uses a spark start system like a gas grill. Electronic ignitions are more efficient in gas usage and also are better suited for high wind areas where a pilot light might get extinguished.
Reply
Will a gas heater operate at the low speed of a dual speed motor?
Reply
Probably not - Most gas heater will shut off at low GPM levels (20-40) to keep the heater cores from overheating - 20 for 200 BTUs, 40 for 400 BTUs. Depending on your pool system you might get these GPM levels at the low speed but generally these heaters must be run at the motor's high speed.
Reply
How do you know if a pool heater is a propane heater or a natural gas heater?
Reply
Typically in the product name we use the abbreviation of "LP" for propane or "NG" for natural gas. Click here for a full listing of our >Pool Heaters.
Reply
