Part # T104M
Alternate Part #'s INT-30-669, INTT104M
Intermatic Swimming Pool Timer Replacement Timer Mechanism
Time switch mechanism only (220 volt), used on a number of Intermatic controls including:
Click here for more Intermatic Timers
How do I know wheather I need the T101M or the T104M?
T101 or T104 should be on the inside door of your current timer or somewhere on the timer. If you cannot find this information you can unclip the timer clock mechanism and on the back of the timer there will be a motor. If there is a part # of WG1570 or 120V marked on the back of the timer motor then you would require a T101M 120V timer mechanism. If there is a part # of WG1573 or 240V marked on the back of the timer motor then you would require the T104M 240V timer mechanism. You may view or purchase these timers through this link http://www.inyopools.com/controls_intermatic_timer_parts.aspx
I think mine is a 110 V not sure. How hard is timer to install. Don't have plug in rec. Have a flip switch, Will timer work on 110V?
Less than 1 hr
I assumed that one of the gears in my timer was slipping on its shaft with no way to repair so ordered this and all it took to replace the old one was to loosen 5 screws reroute the wires and was done. Took about five minutes and timer works just great.
Shipping was really faster than I expected. I have found a new source for pool supplies.
Less than 1 hr
(4 out of 5 stars) easy to instal
Reviewed By: Hector C. from el paso, tx ()
Pros: ver y easy to install
there was simply nothing to it! one tab on top to loosen it, unscrew the wires from the perfectly legible number frames, reverse it to put the new one and that was it! 20 minutes tops!